Tender For Chennai North Side Boundary Re-Cons o PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details 1 27022966 10 10 10 Breaking of RCC & shifting of debris 345 M3 20 Soil Boring for driving of piles 1,010 M 30 Earth Work Excavation 510 M3 40 BACKFILLING AND LEVELLING 800 M3 50 PROVIDING & LAYING PCC M15 GRADE 20 M3 60 PROVIDING & LAYING FINISHING RCC M30 328 M3 70 PROVIDING & FIXING OF REINFORCEMENT 26.3 TO 80 BRICK MASONRY(230 MM THICK)INCL.BRICKS 190 M3 90 P/A 20MM THK EXTERIOR PLASTER WITH CM 2,450 M2 100 fabrication /installation of items 1.2 LO 110 arcrylic emulsion painting 3 coats 2,450 M2 120 Providing & fixing Barbed wire fencing 345 M 130 P & F PVC PIPE 4-DIA SUPREME/FINOLEX, 161 M 140 P & F SHALITEX BOARD IN EXP/CON JOINT 50 M 150 P & L POLYURETHANE SEALANT JOINT 100 M Email : GURUVEER.SINGH@AMNS.IN Contact : Name : Guruveer Singh Item Details : Chennai Steel Service Center (SSC) ANNEXURE-1 BILL OF QUANTITIES FOR BOUNDARY WALL CIVIL WORKS Notes: 1. All Quantities are probable. Actual payment will be done based on quantity of engineering drawings. Rate <(>&<)> Amount shall be filed by the Tenderer. Sr. No. Service Code DESCRIPTION UNIT RATE QTY AMOUNT Important Note: - For all items covered in this section contractor should include all types of scaffolding for all heights, removing and carting scrap material in the client scrap yard or as directed by the engineer in charge. The work should be carried out strictly with safety and most care so that no damage will occur while during the work. Item to include necessary labour, tool <(>&<)> tackles, scaffolding, cleaning, trees, bush cutting <(>&<)> disposal, to make ground workable for construction work, approach for vehicle <(>&<)> man movement, dewatering of surface <(>&<)> subsurface water, in both wet <(>&<)> dry conditions, mud removing, shoring, planking, and strutting (if required), stacking of usable materials etc. complete. The dismantled material having scrap value will be owners property and debris will be disposed of outside factory premises in contractor scope. If required any disposal outside factory premises should be in a proper manner so as not to be a nuisance, as well as in accordance with the laws laid down by the local authorities <(>&<)> necessary local permissions in contractor scope. Measurement shall be paid as per IFC drawings only. Please take the joint measurements/notations of demolition works <(>&<)> materials before start of the work for bill payment. All JMR should be verify <(>&<)> signed off by Site in charge <(>&<)> Plant head on regular basis. Boundary wall Surveying for the works - before the works, during the works <(>&<)> after the works - shall be a part of the entire scope. A BOQ - Compound Wall - North side - @344 M. in Length A.1 3008803 REMOVAL OF EXISITNG CIVIL WORKS : Dsimantling <(>&<)> removing Existing Structure manually/by mechanical means including front clear for wall constuction, stacking of serviceable material <(>&<)> Carting it out of the Site of Works to a safe location (prescribed by Client) with a any lead or within plant premises including placing, spreading, levelling, etc. complete. Includes re moving of RCC Works, Brick-works, MS Fencing Works, Barbed wires, etc. complete bye works as per specification or instruction by Engineer-in-charge. Rmt 345.00 - A.2 3010440 300mm dia Piling - Only boring (10 TON) - Steel <(>&<)> Concrete will be considered separately For Depth of Boring From 0.00 Mtr. to 10.0Mtr. Labour charges for making bore for STRAIGHT BORED piles with Mechanical/Manually auguring as per specifications in all type of soils including spreading of bored material within plot boundary as per instruction of Engineer-in-charge. (Depth of Boring payable shall be taken as per actual i.e. with respect to NGL) Rmt 1,010.00 - A.3 3003928 EXCAVATION FOR FOUNDATIONS - IN ALL TYPES OF SOIL - upto 3.0 m depth or part thereof. Excavation in all kind of soil for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits <(>&<)> general building works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts measured from the ground level, including dressing/ trimming the sides, leveling and ramming of bottoms, manual dewatering, removing rank vegetation, including backfilling in layers not more than 200 mm thickness, watering, consolidating, compacting to achieve not less than 97% Modified Proctor density conforming to relevant IS, stacking the selected material in measurable heaps for future use within owners space or disposing within an initial lead of within plant premises as directed, loading, unloading, leveling Page 2 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details including shoring, strutting etc. complete as directed by Engineer-in-Charge. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, pipe etc complete as directed.ains etc. 2) It also includes the royalty and other taxes applicable if any. Measurement shall be paid only for PCC dimensions. The contractor shall take into account in his rate the provision for any excess excavation for necessary working space, steps, sloping, area hard barrication etc. required for excavation safety, hard barrication and other allied works and refilling the side slopes/working space etc.). Level of excavation will considered average level after stripping of vegitation removal/ stripping and leveling or Fixed by engineer-in Charge . Cum 510.00 - A.4 3013959 Backfilling filling with selected available earth in plant area excavation <(>&<)> backfilling around foundations, wall, trenches, sumps, pits, substructures, plinth area etc. at all depth with stacked/excavation soil near construction boundary or lead of within plant premises including placing, spreading, watering, hammering and even compaction by mini roller, plate compactor or any other mean instructed by Engineer-in-charge to achieve CBR Value 4 (compaction should be at least 95% of standard proctor density), thickness of backfilled layers should not exceeding 200 mm in depth, complete bye works as per specification or instruction by Engineer-in-charge. (The measurement for payment shall be for the theoretical net volume only as per drawing i.e. for the volume of the block of the Backfilling having the depth and maximum bottom dimensions of the foundation/structures as per drawing. ) Cum 800.00 - A.5 3015469 Providing and laying plain cement concrete of Grade M15 Ready mix/Ajex mixer mix with 40 mm down graded coarse aggregates in blinding layer/fill under R.C.C. <(>&<)> masonry foundations, bottom of pits, sumps, channels, storm water drain, pipe encasing including ramming , levelling, curing, mix design,vibration, finishing, dewatering etc. complete. Cost of required form work is a part of this item (Mode of measurement shall be as per IS code). Cement content not to be less than 310kg/cum. (1:2:4). All raw material sand, aggregates, cement MTC etc., approved by NABL lab test including in items. Concrete mix design approved by Engineer-in-charge. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja . Cum 20.00 - A.6 3013365 Providing and laying in position Readymix/Ajex Mixer Mix Concrete M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, finishing and excluding reinforcement, including design mix, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability, all test should be NABL lab test as per direction of Engineer-in-charge. The Mix design as per particular specifications shall be got approved by Engineer-in-Charge before execution of the item. The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of formwork,centering, shuttering, cover block and excluding reinforcement which shall be paid under relevant item. Readymix Concrete/ or Batch Mixer plant to be used. Footings,Columns,Tie Beam as Plinth Level,Bands,Coping Bands etc as per instruction by Engineer-In-charge. (Mode of measurement shall be as per IS code). If quality issue are found after concreting, vendor shall be attend all tests <(>&<)> rectify free of cost. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja . Cum 328.00 - A.7 3015471 Providing and fixing in position TOR steel conforming to IS : 432 / 1786-1985 reinforcement of any dia. and grade Fe550 for RCC piles, pile caps, footings, foundations, slabs, columns, beams, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including straightening, cutting, bending, hooking the bars, binding with GI wires of SWG20 or welding and supporting as required at all locations and all height , labour and materials etc. complete. Wastage in cutting will not be paid for. Only steel actually fixed in position will be paid by Page 3 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details linear measurement including hooks and bends. No payment will be made for binding wires, pins, spacers,chairs, required supports and laps other than standard laps. Authorised/ Standard laps and Chairs as per BIS and or as directed by engineer in-charge shall be payable for RCC beams, slabs, columns, staircase, chajjas, retaining wall etc. as per detailed drawings and schedules including cutting, bending, and binding wire etc. complete as directed. (Make - TISCO, SAIL, VIZAC, ET, JSW, TATA). MT 26.30 - A.8 3003016 P/L BM sub-structure <(>&<)> superstructure above Plinth at wall height 230mm thk. (1:4) first class Red brick Providing brickwork in cement mortar of following proportions in sub-structure <(>&<)> superstructure in all types of facing, including concrete coping, bands, projections, parapets, ornamental cor-nices, string course and at any other location, of circular, curved or any shape including mould-ing and cutwork at all lead and heights, curing, scaf-folding including Providing <(>&<)> Fixing chicken wire mesh (of best quality Galvanized or as specified in drawings or instructed by Engineer In charge) in strips of 200 mm widths over junctions between concrete <(>&<)> masonry including srew,nails and washers prior to plastering, including curing, raking of joints etc. complete with all bye works as per drawing, specification and instruc-tions of the Engineer In charge, with bricks of approved quality. If quality issue are found after/during work, vendor shall be attend all tests <(>&<)> rectify free of cost. The brick work shall conform to IS:2212, Sand shall conform to IS:2116, Cement shall conform to IS:269, Cement mortar shall conform to IS:2250 and Brick shall conform to IS:1077 a) 230 mm thick (in cement mortar 1:4). No saperate payment will be made for form work, scaffolding or other related works. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja. Cum 190.00 - A.9 3016859 P/A 20mm thk exterior plaster with CM (1:3) in Two layers up to wall height as per drawings. Providing 20 mm thick exterior sand faced cement plaster in two layers (First layer of 12mm thick and second layer of 8mm ) including fixing chicken mesh at joints of RCC Beams, Columns with Masonary at all heights <(>&<)> locations for cement mortar 1:3 for external surfaces including chipping concrete surface,hacking of concrete surface, providing bands, drip moulds, grooves, finishing, scaffolding, providing grooves, carvings, coving, moldings, curing, etc. etc. complete all bye work, including integral Waterproofing compound Emperor or approved equivalent @1kg/cement bag and a coat of adhesive complete all work. If quality issue are found after/during work, vendor shall be attend all tests <(>&<)> rectify free of cost. external surfaces including chipping, hacking of concrete surface, finishing, scaffolding, providing grooves, bands, carvings, coving, moldings, curing, etc. Sqm 2,450.00 - A.10 3010345 Providing <(>&<)> Fabrication of structure steel ISI mark standard make including one coat redoxide <(>&<)> two coats of enamel approved paint. Providing, Fabricating and M S angle over compound wall, angles, plates <(>&<)> all other type of inserts in concrete members during concreting as per drawings and instructions in positions and at any level including keeping them in correct position and alignment as per drawings and specification. all as specified and adjustment of reinforcement and shuttering etc. complete with templates wherever necessary (Templates, Supports, etc. will not be measured for payment). including two coats of Synthetic Enamel paint (Asian / Berger / Nerolac or equvivalent) including one coat of Redoxide primer. (Unit : Lot = MT) (Make - TISCO, SAIL, VIZAC, ET, JSW, TATA). MT 1.20 - A.11 3011282 Providing <(>&<)> applying two coats of Acrylic Exterior paint - (Asian / Berger / Nerolac or equivalent) Weather Shield Paint: Finishing walls at all heights with two or more coats to get even shade or surface of Acrylic Smooth exterior paint or equivalent of required shade, brand (manufacture) and quality on plaster work, over and including primer coat to give an even shade. Paints of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. complete. Color shade Page 4 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details should be approved before supply at site by vendor. sqm 2,450.00 - A.12 3008808 Providing <(>&<)> Fixing of 600 mm high concertina wire fence Providing and fixing 600 mm high concertina using High tensile Serrated Wire (HTSW) stretched to 6 meter having 50 Nos. rounds and attached to 3 strands of HTSW by means of C clips. The 2 HTSW wire strains will be attached to MS angle Y shape frame <(>&<)> as per drawings and as directed by Engineer-in-charge. Straight length of the Compound Wall shall be calculated as the measures for the lenght of the wiring. Rmt 345.00 - A.13 3003560 P <(>&<)> F PVC PIPE 4-DIA SUPREME/FINOLEX, 100 Dia. 300mm long PVC drainage pipe Providing and Fixing PVC pipes sleeves (6 kg/cm2) in Mansonry wall, RC wall, beam, slab, column during concreting In perfect alignment at location indicated in drawing and as directed by the Engineer-in-charge. Rmt 161.00 - A.14 3013683 P <(>&<)> F SHALITEX BOARD IN EXP/CON JOINT 25mm thick Providing <(>&<)> fixing shalitex or similar approved quality bitumen impregnated fiber board material in R.C floor slabs, beams, column upto 450mm to 300mm wide at any floor leveling the expansion/contraction joint and directed by E-in-C complete with all shuttering conforming to IS-456-2000. Rmt 50.00 - A.15 3013684 P <(>&<)> L POLYURETHANE SEALANT JOINT Providing and Filling 25mm x10mm deep Polyurethane Sealant in joint. Before filling cleaning of joint ,debris removal from joint etc. as directed by EIC. Make : CICO TECHNOLOGIES, PIDILITE, SIKA INDIA, FOSROC CHEMICAL, CHOWKSEY CHEMICALS, STP Rmt 100.00 - Total A (Rs.) - Grand Total (Rs.) - - Item Note : Chennai Steel Service Center (SSC) ANNEXURE-1 BILL OF QUANTITIES FOR BOUNDARY WALL CIVIL WORKS Notes: 1. All Quantities are probable. Actual payment will be done based on quantity of engineering drawings. Rate <(>&<)> Amount shall be filed by the Tenderer. Sr. No. Service Code DESCRIPTION UNIT RATE QTY AMOUNT Important Note: - For all items covered in this section contractor should include all types of scaffolding for all heights, removing and carting scrap material in the client scrap yard or as directed by the engineer in charge. The work should be carried out strictly with safety and most care so that no damage will occur while during the work. Item to include necessary labour, tool <(>&<)> tackles, scaffolding, cleaning, trees, bush cutting <(>&<)> disposal, to make ground workable for construction work, approach for vehicle <(>&<)> man movement, dewatering of surface <(>&<)> subsurface water, in both wet <(>&<)> dry conditions, mud removing, shoring, planking, and strutting (if required), stacking of usable materials etc. complete. The dismantled material having scrap value will be owners property and debris will be disposed of outside factory premises in contractor scope. If required any disposal outside factory premises should be in a proper manner so as not to be a nuisance, as well as in accordance with the laws laid down by the local authorities <(>&<)> necessary local permissions in contractor scope. Measurement shall be paid as per IFC drawings only. Please take the joint measurements/notations of demolition works <(>&<)> materials before start of the work for bill payment. All JMR should be verify <(>&<)> signed off by Site in charge <(>&<)> Plant head on regular basis. Boundary wall Surveying for the works - before the works, during the works <(>&<)> after the works - shall be a part of the entire scope. A BOQ - Compound Wall - North side - @344 M. in Length A.1 3008803 REMOVAL OF EXISITNG CIVIL WORKS : Dsimantling <(>&<)> removing Existing Structure manually/by mechanical means including front clear for wall constuction, stacking of serviceable material Page 5 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details <(>&<)> Carting it out of the Site of Works to a safe location (prescribed by Client) with a any lead or within plant premises including placing, spreading, levelling, etc. complete. Includes re moving of RCC Works, Brick-works, MS Fencing Works, Barbed wires, etc. complete bye works as per specification or instruction by Engineer-in-charge. Rmt 345.00 - A.2 3010440 300mm dia Piling - Only boring (10 TON) - Steel <(>&<)> Concrete will be considered separately For Depth of Boring From 0.00 Mtr. to 10.0Mtr. Labour charges for making bore for STRAIGHT BORED piles with Mechanical/Manually auguring as per specifications in all type of soils including spreading of bored material within plot boundary as per instruction of Engineer-in-charge. (Depth of Boring payable shall be taken as per actual i.e. with respect to NGL) Rmt 1,010.00 - A.3 3003928 EXCAVATION FOR FOUNDATIONS - IN ALL TYPES OF SOIL - upto 3.0 m depth or part thereof. Excavation in all kind of soil for foundations, substructures, basements, tanks, sumps, walls, chambers, manholes, trenches, poles, pits <(>&<)> general building works in all types of soils, vegetable earth, soft murum, running sand, shingle, turf clay, loam, peat, ash, shale, slag, chalk, garbage, muddy/marshy/ slushy soil, marine clay, reclaimed land etc. for depths/lifts measured from the ground level, including dressing/ trimming the sides, leveling and ramming of bottoms, manual dewatering, removing rank vegetation, including backfilling in layers not more than 200 mm thickness, watering, consolidating, compacting to achieve not less than 97% Modified Proctor density conforming to relevant IS, stacking the selected material in measurable heaps for future use within owners space or disposing within an initial lead of within plant premises as directed, loading, unloading, leveling including shoring, strutting etc. complete as directed by Engineer-in-Charge. Note: 1) The rate includes the handling/supporting the existing utilities such as cables, pipe etc complete as directed.ains etc. 2) It also includes the royalty and other taxes applicable if any. Measurement shall be paid only for PCC dimensions. The contractor shall take into account in his rate the provision for any excess excavation for necessary working space, steps, sloping, area hard barrication etc. required for excavation safety, hard barrication and other allied works and refilling the side slopes/working space etc.). Level of excavation will considered average level after stripping of vegitation removal/ stripping and leveling or Fixed by engineer-in Charge . Cum 510.00 - A.4 3013959 Backfilling filling with selected available earth in plant area excavation <(>&<)> backfilling around foundations, wall, trenches, sumps, pits, substructures, plinth area etc. at all depth with stacked/excavation soil near construction boundary or lead of within plant premises including placing, spreading, watering, hammering and even compaction by mini roller, plate compactor or any other mean instructed by Engineer-in-charge to achieve CBR Value 4 (compaction should be at least 95% of standard proctor density), thickness of backfilled layers should not exceeding 200 mm in depth, complete bye works as per specification or instruction by Engineer-in-charge. (The measurement for payment shall be for the theoretical net volume only as per drawing i.e. for the volume of the block of the Backfilling having the depth and maximum bottom dimensions of the foundation/structures as per drawing. ) Cum 800.00 - A.5 3015469 Providing and laying plain cement concrete of Grade M15 Ready mix/Ajex mixer mix with 40 mm down graded coarse aggregates in blinding layer/fill under R.C.C. <(>&<)> masonry foundations, bottom of pits, sumps, channels, storm water drain, pipe encasing including ramming , levelling, curing, mix design,vibration, finishing, dewatering etc. complete. Cost of required form work is a part of this item (Mode of measurement shall be as per IS code). Cement content not to be less than 310kg/cum. (1:2:4). All raw material sand, aggregates, cement MTC etc., approved by NABL lab test including in items. Concrete mix design approved by Engineer-in-charge. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja . Cum 20.00 - A.6 3013365 Providing and laying in position Readymix/Ajex Mixer Mix Page 6 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details Concrete M30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping of concrete to site of laying, finishing and excluding reinforcement, including design mix, admixtures in recommended proportions as per IS: 9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability, all test should be NABL lab test as per direction of Engineer-in-charge. The Mix design as per particular specifications shall be got approved by Engineer-in-Charge before execution of the item. The rate shall include cost of all specified materials and operations at all levels and heights, including the cost of formwork,centering, shuttering, cover block and excluding reinforcement which shall be paid under relevant item. Readymix Concrete/ or Batch Mixer plant to be used. Footings,Columns,Tie Beam as Plinth Level,Bands,Coping Bands etc as per instruction by Engineer-In-charge. (Mode of measurement shall be as per IS code). If quality issue are found after concreting, vendor shall be attend all tests <(>&<)> rectify free of cost. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja . Cum 328.00 - A.7 3015471 Providing and fixing in position TOR steel conforming to IS : 432 / 1786-1985 reinforcement of any dia. and grade Fe550 for RCC piles, pile caps, footings, foundations, slabs, columns, beams, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules including straightening, cutting, bending, hooking the bars, binding with GI wires of SWG20 or welding and supporting as required at all locations and all height , labour and materials etc. complete. Wastage in cutting will not be paid for. Only steel actually fixed in position will be paid by linear measurement including hooks and bends. No payment will be made for binding wires, pins, spacers,chairs, required supports and laps other than standard laps. Authorised/ Standard laps and Chairs as per BIS and or as directed by engineer in-charge shall be payable for RCC beams, slabs, columns, staircase, chajjas, retaining wall etc. as per detailed drawings and schedules including cutting, bending, and binding wire etc. complete as directed. (Make - TISCO, SAIL, VIZAC, ET, JSW, TATA). MT 26.30 - A.8 3003016 P/L BM sub-structure <(>&<)> superstructure above Plinth at wall height 230mm thk. (1:4) first class Red brick Providing brickwork in cement mortar of following proportions in sub-structure <(>&<)> superstructure in all types of facing, including concrete coping, bands, projections, parapets, ornamental cor-nices, string course and at any other location, of circular, curved or any shape including mould-ing and cutwork at all lead and heights, curing, scaf-folding including Providing <(>&<)> Fixing chicken wire mesh (of best quality Galvanized or as specified in drawings or instructed by Engineer In charge) in strips of 200 mm widths over junctions between concrete <(>&<)> masonry including srew,nails and washers prior to plastering, including curing, raking of joints etc. complete with all bye works as per drawing, specification and instruc-tions of the Engineer In charge, with bricks of approved quality. If quality issue are found after/during work, vendor shall be attend all tests <(>&<)> rectify free of cost. The brick work shall conform to IS:2212, Sand shall conform to IS:2116, Cement shall conform to IS:269, Cement mortar shall conform to IS:2250 and Brick shall conform to IS:1077 a) 230 mm thick (in cement mortar 1:4). No saperate payment will be made for form work, scaffolding or other related works. Cement :- Ultratech , JK cement , Shree cement , ACC , Ambuja. Cum 190.00 - A.9 3016859 P/A 20mm thk exterior plaster with CM (1:3) in Two layers up to wall height as per drawings. Providing 20 mm thick exterior sand faced cement plaster in two layers (First layer of 12mm thick and second layer of 8mm ) including fixing chicken mesh at joints of RCC Beams, Columns with Masonary at all heights <(>&<)> locations for cement mortar 1:3 for external surfaces including chipping concrete surface,hacking of concrete surface, providing bands, drip moulds, grooves, finishing, scaffolding, providing Page 7 of 7 ArcelorMittal Nippon Steel India Pvt Ltd AM/NS India (CHN) Plot No A6, SIPCOT Industrial Growth Center,Sriperambathur Taluk, Dist Kancheepuram,602105,Tamil Nadu,India GSTIN 33AAACE1741P1ZO PAN AAACE1741P CIN U27100GJ1976FTC013787 Request for Quotation Number 6000133608 Date 06.05.2025 Submission Date 15.05.2025 Coll Req No AMNS deals with OEMs directly. We are very well equipped in every way to import / buy our goods directly from OEMs from any part of the world in a professional manner. We also use the vast global networks of our parent companies where necessary. We do not welcome any contact from intermediaries or Indian Agents of vendors. We assure all OEMs that you do not need to engage anyone to manage your transactions with us.Kindly respond to our RFQs and deal with our officials directly without involving any agents or intermediaries. Offers of vendors who insist on involving intermediaries in dealings with us could be disqualified. Contact for this RFQ Ms. Vanshika Awasthi Contact 9816450331 Email VANSHIKA.AWASTHI@AMNS.IN MATERIALS / SERVICES Please acknowledge receipt of the RFQ And provide your best quote for below given RFQ details. SR. No PR No. PR Item RFQ Item Services for line Item Quantity UOM Technical Details Other Details grooves, carvings, coving, moldings, curing, etc. etc. complete all bye work, including integral Waterproofing compound Emperor or approved equivalent @1kg/cement bag and a coat of adhesive complete all work. If quality issue are found after/during work, vendor shall be attend all tests <(>&<)> rectify free of cost. external surfaces including chipping, hacking of concrete surface, finishing, scaffolding, providing grooves, bands, carvings, coving, moldings, curing, etc. Sqm 2,450.00 - A.10 3010345 Providing <(>&<)> Fabrication of structure steel ISI mark standard make including one coat redoxide <(>&<)> two coats of enamel approved paint. Providing, Fabricating and M S angle over compound wall, angles, plates <(>&<)> all other type of inserts in concrete members during concreting as per drawings and instructions in positions and at any level including keeping them in correct position and alignment as per drawings and specification. all as specified and adjustment of reinforcement and shuttering etc. complete with templates wherever necessary (Templates, Supports, etc. will not be measured for payment). including two coats of Synthetic Enamel paint (Asian / Berger / Nerolac or equvivalent) including one coat of Redoxide primer. (Unit : Lot = MT) (Make - TISCO, SAIL, VIZAC, ET, JSW, TATA). MT 1.20 - A.11 3011282 Providing <(>&<)> applying two coats of Acrylic Exterior paint - (Asian / Berger / Nerolac or equivalent) Weather Shield Paint: Finishing walls at all heights with two or more coats to get even shade or surface of Acrylic Smooth exterior paint or equivalent of required shade, brand (manufacture) and quality on plaster work, over and including primer coat to give an even shade. Paints of approved colour to the plastered surfaces including scaffolding if necessary, cleaning and preparing the surface etc. complete. Color shade should be approved before supply at site by vendor. sqm 2,450.00 - A.12 3008808 Providing <(>&<)> Fixing of 600 mm high concertina wire fence Providing and fixing 600 mm high concertina using High tensile Serrated Wire (HTSW) stretched to 6 meter having 50 Nos. rounds and attached to 3 strands of HTSW by means of C clips. The 2 HTSW wire strains will be attached to MS angle Y shape frame <(>&<)> as per drawings and as directed by Engineer-in-charge. Straight length of the Compound Wall shall be calculated as the measures for the lenght of the wiring. Rmt 345.00 - A.13 3003560 P <(>&<)> F PVC PIPE 4-DIA SUPREME/FINOLEX, 100 Dia. 300mm long PVC drainage pipe Providing and Fixing PVC pipes sleeves (6 kg/cm2) in Mansonry wall, RC wall, beam, slab, column during concreting In perfect alignment at location indicated in drawing and as directed by the Engineer-in-charge. Rmt 161.00 - A.14 3013683 P <(>&<)> F SHALITEX BOARD IN EXP/CON JOINT 25mm thick Providing <(>&<)> fixing shalitex or similar approved quality bitumen impregnated fiber board material in R.C floor slabs, beams, column upto 450mm to 300mm wide at any floor leveling the expansion/contraction joint and directed by E-in-C complete with all shuttering conforming to IS-456-2000. Rmt 50.00 - A.15 3013684 P <(>&<)> L POLYURETHANE SEALANT JOINT Providing and Filling 25mm x10mm deep Polyurethane Sealant in joint. Before filling cleaning of joint ,debris removal from joint etc. as directed by EIC. Make : CICO TECHNOLOGIES, PIDILITE, SIKA INDIA, FOSROC CHEMICAL, CHOWKSEY CHEMICALS, STP Rmt 100.00 - Total A (Rs.) - Grand Total (Rs.)
