Tender For Decoration And Installation Of Samaj Sadan Hall Under Kamarhati Municipality - Providing and fixing of false ceiling with powder coated exposed G.I. grid suspension system (E-Grid U-1520 or equivalent load carrying capacity with mid span deflection not exceeding 1/360 span with hanger spacing of 1200mm c/c ) consisting of Main Runner 3600 mm long, Cross Tee 1200 mm / 600 mm long and Wall Angle. The Wall Angle shall be fixed on PVC Dash Fasteners on the perimeter of the wall by steel screws with distance 300mm c/c. The Main Runners to be placed @ 1200 mm. The Cross Tee 1200mm will be inserted in the pre-cut slots of Main Runner at a regular interval of 600 mm to form a modular grid of 1200mm X 600mm. Additional Cross Tees of 600 mm shall be placed perpendicular to the Cross Tee 1200 mm long to finally form a grid of 600 mm X 600 mm. Grid of module size 600 mm X 600 mm shall be supported by 6 mm dia G.I. wire from purlins / soffit. 15mm thick OW Acoustic Board (Mineral Fiber Acoustic Ceiling Tiles) of approved patern and size 595mm X 595mm with NRC value > 0.65 should be placed in the Grid module to form a False Ceiling. All complete as per the drawing & directions of Engineer-in-charge. In ground floor. a) Acoustic False Ceiling (with 15mm thick OW Acoustic Board and E-Grid U- 1520). 30*0*25.0+4*20.0*2.4 (P-162,I.no.-6,(a) 2 Acoustic Wall Panelling : Providing, fabricating and fixing plain/curved panelling on RCC/Masonry /plaster surfaces using standard anodized extruded aluminium box sections of approved quality and make, fixed firmly to the floor at base and adjacentall/partition/ceiling complete including the following specifications: The exposed panels between the top panel and bottom panel of the plywood shall be finished by fixing 21mm thick ARMSTRONG ‘SOUND SOAK’ Acoustical wall panelling (2200mm x 600mmx21mm thick) approved make and shade, fixing as per manufacturer’s specifications and design with additional hardware, fittings, fixing etc all complete as per manufacturers specifications and Note: a. The panelling area will be measured from floorto the false ceiling level including the skirting. Rate should be inclusive of the framing, raceways, skirting, wire carrier, plywood, laminate, Armstrong ‘Sound soak’ wall panelling(2200x600x21mm)labour, etc all complete b. All exposed aluminium sections shall be powder coated (60 microns) of approved shade and colour as directed. (Non Schedule) Acoustic Wall Panelling : Providing, fabricating and fixing plain/curved panelling on RCC/Masonry /plaster surfaces using standard anodized extruded aluminium box sections of approved quality and make, fixed firmly to the floor at base and adjacentall/partition/ceiling complete including the following specifications: The exposed panels between the top panel and bottom panel of the plywood shall be finished by fixing 21mm thick ARMSTRONG ‘SOUND SOAK’ Acoustical wall panelling (2200mm x 600mmx21mm thick) approved make and shade, fixing as per manufacturer’s specifications and design with additional hardware, fittings, fixing etc all complete as per manufacturers specifications and Note: a. The panelling area will be measured from floorto the false ceiling level including the skirting. Rate should be inclusive of the framing, raceways, skirting, wire carrier, plywood, laminate, Armstrong ‘Sound soak’ wall panelling(2200x600x21mm)labour, etc all complete b. All exposed aluminium sections shall be powder coated (60 microns) of approved shade and colour as directed. (Non Schedule) 3 Cost of Stage Equipments (Non Schedule) 4 Cost of Sitting arrangement including fixing for 50nos. Executive PVC cushions (Non Schedule) 5 Cost of Sitting arrangement including fixing for 600nos. PVC cushions (Non Schedule) 6 Cost of Stage Equipments (Non Schedule) 7 Dismantling R.C. floor, roof, beams etc. including cutting rods and removing rubbish as directed within a lead of 75 m. including stacking of steel bars. (a) In ground floor including roof. (P-10,I.no.-3,a) 2*22*0.2*0.01*0.01+2*16*0.2*0.01*0.01 8 M.S. structural works with hollow sections (square or rectangular shape) conforming to IS: 806-1968 & IS:1161-1998) connected to one another with bracket, gusset, cleat as per design, drawing & direction of Engineer-in-Charge complete including cutting torequisite shape & size, fabrication including metal arc welding conforming to IS: 816-1969 & IS: 9595 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erection all complete. The rate includes the cost of all M.S. Hollow section, all consumables such as electrodes, gas and hire charges of all tools and plants and labour reqired for execution and all incidental chages (such as electricity, labour insurance) etc. complete. Payment to be made on the basis of calculated weight of structural memebrs of MS Holow Section as specified in relevent IS code in finished work. Payment for gusset, bracket, cleat may be made by adding the actual weight of such items with weight of finished structural members. The rates are considered for a hight of erection 8 m. / 2nd floor level from the ground. Add 1.5 % extra over the rate for each additional floor or 4m. beyond the initial 8 m. or part thereof. i) For roof truss works c) Span beyond 20 Mtr and up to 30 Mtr (P-192,I.no.-15) Tie & rafter -(6*2*4.74+6*9.0+6*2*0.375+6*2*1.186+6*2*0.75+6*2*1.352+6*2*1.125+6*2*1.591+6*1.5+6*9.0)@4.98 kg/mtr. Purlin - 10*30.0 @ 18.87 kg/m Top-75x45,Shoe-70x40(2 nos.) St. Head-70x25(4) Strut base-45x30(4nos) 10mm thick @ 7850Kg/cum 9 Wooden Flooring : Providing and fixing slotted angle base frame made of 38mmx38mmx6mm thick slotted angles frame work at 600mm c/c (bothways on floor and at top as shown in drawing) using 38mm x38mm 6mm slotted angles maintaining proper line, levels as indicated in Drawing and as specified as per site conditions and requirement, cutting to required size and shape , fixing the slotted angles to the floor or adjacent walls using dash fasteners of approved quality, make and size and fixing the intersection, junctions of slotted angles with approved quality and make fittings, fixtures and hardware, including Cross diagonal bracings to avoid lateral movement as indicated below: i. Diagonal double cross bracings along the line of slotted angles (width of the Auditorium) wherever there is change of floor levels as indicated in the drawing (between +0.00 & +150mm, +150mm & +300mm, +300mm & +450mm. +450mm & +600mm) including cost of framing. (Non Schedule) 10 ENTRY SINGAGE Size: 42’’ X 8’’ Base:3mm Aludecor White ACP Side Panel:3mm Aludecor White ACP Structure:AluminiumCUSTOMISED ARTWORK FOR ENTRY SIGNAGE,KAMARHATI MUNICIPALITY SIGNAGE (ACRYLIC GSB) Size:8’’ Diameter, CUSTOMISED ARTWORK FOR KAMARHATI MUNICIPALITY SIGNAGE 11 GST @ 18% 12 L.W. Cess @ 1%
