Tender For Construction Of Flood Simulation Pool Of Civil Defence And Home Guards At Mawkasiang
Tender Value
3 Crore
Estimated cost
Bid Submission
26 May 2025
0 days left
EMD
6 Lakhs
Bank guarantee accepted
Document Fee
5900
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
shillong → Meghalaya
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Flood Simulation Pool Of Civil Defence And Home Guards At Mawkasiang
BOQ
| Sl. No. | Item Description |
| 1 | Civil and Electrical works |
| 2 | Earthwork in excavation by manual means up to a depth of 2m below the existing ground level for foundation trenches of foundations, footings of column/ walls, retaining walls, septic tank etc. including bailing out water where necessary and removal Of surplus earth with all lead and lifts as directed and specified for the following classification of soils.a) All kinds of soil (ordinary soil/ hard soil/ dense soil) |
| 3 | b) In Oridnary rock (soft rock/medium rock/hard rock) |
| 4 | Providing soling with stone/ best quality picked jhama brick, sand packed and laid to level and in panel after preparing the subgrade as directed including all labour and materials and if necessary dewatering, complete. Stone soiling of thickness i) 100 mm |
| 5 | (ii) 150mm. |
| 6 | Plain cement concrete works in foundation bed for footing steps, walls, brick works etc below plinth level as directed and specified including dewatering if necessary, and curing complete (shuttering where necessary shall be measured and paid separately) |
| 7 | Randomrubblemasonrywithhardstoneinsuperstructure aboveplinthlevelandup to tirst floor level,includinglevemng up with cement concrete 1 :6:12 (1cement: 6 coarse sand:12 graded stone aggregate20mmnominalsize)at window sill, ceiling level and the like. |
| 8 | Random rubble masonry with hard stone in superstructure above plinth level and up to tirst floor level, including levemng up with cement concrete 1 :6:12 (1 cement: 6 coarse sand: 12 graded stone aggregate 20 mm nominal size) at window sill, ceiling level and the like. |
| 9 | Providing boulder or stone filling with boulders or stones 15 cm size, 60 cm wide behind the retaining wall etc. complete as directed. |
| 10 | Sand filling in plinth in layers not exceeding 150 mm thick including breaking Of clods, consolidating by ramming and watering complete as directed (maximum depth 45 cm). |
| 11 | Centerlng and shutterlng lncludlng struttlng, propplngetc. and removal of form for all heights complcte and asdirected by Engineer in charge.Foundations, footings, bases of columns, etc. for mass concrete (using steel). |
| 12 | Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc (using steel) |
| 13 | Lintels, beams, plinth beams, girders, bressumers andcantilevers with water proof ply 12 mm thick |
| 14 | Columns, Pillars, Piers, Abutments, Posts and struts (usingsteel). |
| 15 | Slabs, roofs, landings, balconies and access platform, shelves (using steel). |
| 16 | Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cutting and bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required)Supplying, fitting and fixing in position reinforcement bars up to lst floor level, conforming to relevant I.S. Code for Ft.C.C. work/ a.a. walling including straightening, cleaning, cuttingand bending to proper shapes and length as per details, supplying and binding with 20 G annealed black wire and placing in position with proper blocks, supports, chairs, spacers etc. complete. (Rates inclusive of all wastage, lappage, hooks, chairs, anchorage etc. and no measurement for the same is required). |
| 17 | Providing and laying in position machine batched andmachine mixed design mix M-30 grade cement concrete for reinforced cement concrete work, using cement content as per approved design mix, including pumping Of concrete to site of laying but excluding the cost of centering, shuttering, finishing and reinforcement, including admixtures in recommended proportions as per ls: 9103 to accelerate,b All works above plinth level up to first floor levelretard setting of concrete, improve workability without impairing strength and durability as per direction of Engineer in-charge. level, excluding cost of centering, shuttering, finishing and reinforcement: |
| 18 | Half brick masonry with common burnt clay (non modular) lst class bricks in superstructure above plinth level up to first floor levela) Cement mortar 1: 3 |
| 19 | Providing and fixing in position collapsible steel shutters with vertical channels 20xl0x2 mm and braced with flat iron diagonals 20x5 mm size, with top and bottom rail of T-iron 40x40x6 mm, with 40 mm dia. steel pulleys, complete with bolts, nuts, locking arrangement, stoppers, handles, including applying a priming coat of approved steel primer. |
| 20 | Providing, fitting and fixing steel windows (including ventilators) of standard rolled steel sections as per relevant I.S. Code, joints mitred and welded with 15x3xl00 mm lugs embedded in cement concrete block of M-10 grade including providing and fixing of projecting hinges (not more than 65 mm and not less than 15 mm wide) bolting device, steel handles, pegs, stays of 300 mm long etc. complete including providing 12xl2 mm square bars duly welded to steel frame at not more than 12 cm c/c applying a priming coat of red-lead paint etc. complete as per drawing |
| 21 | Steel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc„ including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 22 | Providing corrugated G.S or galvanised iron sheet roofing including vertical/ curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead, including a coat Of approved steel primer and two coats of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. |
| 23 | Providing and fixing insulating board ceiling of approved quality with necessary nails etc. complete (frame work to be paid separately). |
| 24 | Extra for providing and fixing ceiling to curved surfaces in narrow widths. |
| 25 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1 :5 (1 cement: 5 coarse sand) finished with a top layer 6 mm thick cement plaster 1:6 (1 cement: 6 fine sand). |
| 26 | 50 mm thick cement concrete flooring with concrete hardener topping, under layer 38 mm thick cement concrete 1:2:4 (1cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) and top layer 12 mm thick cement hardener consisting of mix 1 :2 (1 cement hardener mix: 2 graded stone aggregate 6 mm nominal size) by volume, hardening compound mixed @ 2 litre per 50 kg of cement or as per manufacturer\"s specifications. This includes cost of cement slurry, complete. |
| 27 | Providing lead caulked joints to spun iron or C.I. pipes and specials, including testing of joints: d) 200 mm diameter pipe |
| 28 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings. This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Change.External work (vi) 50 mm nominal inner diameter pipes |
| 29 | (viii) 75 mm nominal inner diameter pipes |
| 30 | (vii) 62.50 mm nominal inner diameter pipes |
| 31 | (ix) 100 mm nominal inner diameter pipes |
| 32 | Providing and laying glass ceramic tiles of the approved size & color and make to form inside finish of the pool.Tiles Specification:-24.5mm/24.5mm.Thickness :- 3mm.Heat resistance,crazing resistance,washable,resistance of acid & Non- fading of color.Tiles Chemicals:-1. Adhesive. (Brand- Laticrete) for tiles pasting.2. Epoxy grout. ((Brand- Laticrete) for tiles gap filling. |
| 33 | Complete GUNITIG WORK WITH WATERPROOFING chemical,dust,cement 4-6 coarse aggregate (Jeera Rodi) mixture on the entire inside surface of the pool. |
| 34 | Reinforced cement concrete work in beams, slabs, roofs having slope up to 15°, landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to first floor level, excluding the cost of centerlng, shuttering, finishing and reinforcement.a) M15 or Prop 1: 2: 4 (1 cement: 2 coarse sand: 4 graded stone aggregate 20 mm nominal size) |
| 35 | (b) M20 or 1 : l/3 :3 (1cement: l/3 coarse sand: 3 graded stone aggregate 20 mm nominal size) |
| 36 | Half brick masonry with common burnt clay (non modular) 1st class bricks in foundations and in plinth: |
| 37 | 12 mm cement plaster of mix: |
| 38 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade: New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 39 | Steel work welded in built up sections/ framed work including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel eta. as required. |
| 40 | Finishing walls with textured exterior paint of required shade, including scaffolding. |
| 41 | Providing and fixing factory made upvc white colour sliding glazed window up to 1.50 in in height dimension comprising of UPVC multi-chambered frame with in-built roller track and sash extruded profiles duly reinforced with 1.60 ±0.2 mm thick galvanized mild steel section made from roll forming process of required length (shape & size according to UPVC profile), appropriate dimension of UPVC extruded glazing beads and UPVC extruded interlocks, EPDM gasket, wool pile, zinc alloy (white powder coated) touch locks with hook, zinc alloy body with single nylon rollers (weight bearing capacity to be 40 kg), G.I fasteners 100x8 mm size for fixing frame to finished walland necessary stainless steel screws etc. Profile ot frame & sash shall be mitred cut and fusion welded at all comers,including drilling of holes for fixing hardware\"s and drainage of water etc. After fixing frame the gap between f rame and adjacent finished wall shall be filled with weather proof silicon sealant over backer rod of required size and of approved quality, all complete as per approved drawing & direction of Engineer-in-Charge. (Single/ double glass panes shall be paid separately).Note: For UPVC frame and sash extruded profiles minus 5°/a tolerance in dimension i.e. in depth & width Of profile shall be acceptable. Variation in profile dimension in higher side shall be accepted but no extra payment on this account shall be made.b) Three track three panels sliding window with fly proof ss wire mesh (Twc) nos. glazed & one no. wire mesh panels) made ot (small series) frame 92x44 mm & sash 32x60 mm both having wall thickness of 1.9 sO.2 mm and single glazing bead of appropriate dimension (Area of window up to 1.75 sqm). |
| 42 | Providing and fixing one piece construction white vitreous china squatting plate with an integral longitudinal flushing pipe, white P.V.C. automatic flushing cistern, with fittings, standard size G.I./ PVC flush pipe for back and front flush with standard spreader pipes with fittings, G,I clamps and C.P. brass coupling complete, including painting of fittings and cutting and making good the walls and floors etc. wherever required: |
| 43 | Providing and fixing wash basin with C.I. brackets, 15 mm dia. CP Brass single hole basin mixer Of approved quality and make, including painting Of fittings and brackets, cutting and making good the walls wherever required:- White Vitreous China Wash basin size 550x400 mm with a 15 mm CP Brass single hole basin mixer |
| 44 | Providing and fixing mirror of superior glass ( of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing: |
| 45 | Providing and fixing PTMT soap dish holder having length of 138 mm, breath 102 mm height of 75mm with concealed fitting arrangements weighing not less than 106 gms |
| 46 | Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats with CP brass screws with concealed fittings arrangement of approved quality and colour. |
| 47 | Providing, and fixing Chrome TOILET PAPER holder: |
| 48 | Providing and fixing C.P. brass long nose bib cock ofapproved quality conforming to ls standards and weighing not less than 810 gins. |
| 49 | Providing and fixing C.P. brass long body bib cock ofapproved quality conforming to ls standards and weighing not less than 690 gins. |
| 50 | Supplying, fitting chrome plated (C.P.) wall mixer complete as directed. |
| 51 | Supplying and placing plastic cylindrical vertical closed top (PCVC)tankSintex / Polycon / Patton……. pads of size as required for inlet and outlet pipes. 1000 litre capacity |
| 52 | Providing and fixing chlorinated polyvinyl chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 in spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. |
| 53 | 900mm dia Bobbin wound Side mount filter 2\" / 63mm and necessary accessories such as pressure gauge, manual air vent, manual water drain etc.,Filtration Velocity 50m³/hr/m², Maximum working pressure : 2.5 Bar Flow rate: 26m³/hr |
| 54 | Victoria SilentPlus. Flow: 34 m3/hr @ 10m head. 3 HP/ 230 V II. Pump body and support in heat resistant plastic. Double protected shaft with IP-55 protection. Largecapacity strainer. Noryl Impeller. (4Working+1Standby) |
| 55 | Manual analog 3 2 l/h – 4 bar.Acqua Dos series analogic dosing pumps with constant flow rate are manually adjustable by a knob mountedon the front panel.The flow rate has two frequency ranges:• 0÷20 % of max flow rate• 0÷100% of max flow rateInput for minimum chemical level control (not included). |
| 56 | Semi transparent polyethelene tank with external scale so that levels can be checked easily, capacityof tank 500lts.etc., complete, Make : AstralPool |
| 57 | Agitators for easy installation in the tanks, provided with steering grip in bakelite, rod and propellor arms in PVC .. length of stirring rod 900mm. etc., complete,Make : AstralPool |
| 58 | Drain grille in stainless steel-AISI-304. 300mm x 300mm .Flow Rate: 43 m3/h |
| 59 | Suction Nozzle. Outer 2\" thread, Ø 50 mm inner wall.. Made ofwhite ABS with 11/2\" threaded plug. |
| 60 | PVC wall conduits 300mm long. |
| 61 | Supplying of Floor Inlet. Adjustable flow rate. Made of ABS plastic and screws in stainlesssteel. Maximum recommended flow rate : 12 m3/h. |
| 62 | ABS Drain Grille. |
| 63 | Mixed Ladder in AISI 304 with handrails -3 steps |
| 64 | Mixed Ladder in AISI 304 with handrails -4 steps |
| 65 | Gratings 24X300mm PP UV Resistant |
| 66 | 90° corner tiles for overflow channels. Height 35 mm,channel width 295 mm |
| 67 | Flat LED light 35 W/12 - 20V AC, Warm white. With ABS Faceplate |
| 68 | Junction Boxes, made in ABS. |
| 69 | Flexible conduit |
| 70 | Transformer 300W |
| 71 | Starting blocks for competition pools AISI-304 - 400mmheight |
| 72 | Float lines Length in PVC, 25 Mtr |
| 73 | Float Line anchors made in S.S. - 304 |
| 74 | Float Line Hook Tensioner |
| 75 | Float Line SS Hook |
| 76 | Float line roller |
| 77 | Life Buoys |
| 78 | Lifeguard Loop |
| 79 | Aluminium vacuum head 800mm length |
| 80 | Trailing cable - in mtrs |
| 81 | Reinforced telescopic pole, aluminium 5 - 10 m |
| 82 | Vacuum Hose 38mm- 1.5\"30mVacuum Hose 38mm- 1.5\"30m |
| 83 | Surface net made inpolypropelene and white |
| 84 | Straight brushes made in polypropelene for pool |
| 85 | Telescopic Pole 2.4 - 4.8m long - Shark Series |
| 86 | Test kit for free chlorine & pH |
| 87 | Ball Valve Dia 50 mm (Filling Line-3) |
| 88 | Ball Valve Dia 75 mm (Filtration Pump Suc & Del-10, Inlet-4,Drain-4, Suction Inlet-1) |
| 89 | Ball Valve Dia 90mm (BT Suction-4) |
| 90 | Check Valve 75mm Dia (Filtration Pump Del-5) |
| 91 | Check Valve 75mm Dia (BT Suction-4) |
| 92 | 50mm Dia Pipe - 10kg/cm2, Make : FINOLEX |
| 93 | 75mm Dia Pipe - 10kg/cm2, Make : FINOLEX |
| 94 | 90mm Dia Pipe - 10kg/cm2, Make : FINOLEX |
| 95 | Media - 0.4mm -0.8mm size.etc., complete |
| 96 | PANEL BOARD(F) The panel board shall house: 1 No 4 pole 200A MCCB,65kA as Normal Supply Incomer, 4 pole 200A Al. busbar; 3 Nos Current transformer of 200/5A; 1 No Ammeter with selector switch; 1 No 0-500V Voltmeter with selector switch; 3 Nos LEDs; 7Nos 4 pole,63A MCB,25kA as outgoing feeders; 9Nos DP, 40A MCB,KA as outgoing feeders |
| 97 | EarthingSupplying, fitting and fixing of MFE 40, GI chemical earthing electrode filled with CMM and Black fill compound |
| 98 | Providing supplying of Multicore Cables including carriage testing of the following sizes PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694(i) 2 core |
| 99 | (b)10mm2 |
| 100 | Providing laying connection testing & commissioning testing & commissioning of the following sizes of 1100V PVC/XLPE armoured Cables with Aluminium Conductor as per ISI Code in bracket,trenches,M.S. cable rods and including the cost of digging of trenches,sand cushioning with laying etc and refilling the same in layers or by supporting them in walls and all other accessories as required(b) with 3.5 core 25 sq mm |
| 101 | Wiring in looping system with copper PVC cable 250/440 volt grade of size 1.5sqmm of approved quality usimh PVC casing capping including 5 amperes switch Indian best quality ceiling rose etc. capable to a highest point.(b)Medium point uto 6mts |
| 102 | Wiring as in item No.1 complete to a light plug point when fixed elsewhere with continous earth wire complete(b)Medium point uto 6mts |
| 103 | Wiring to a power plug as in item No.1 above with continous earth wire complete(b)Medium point uto 6mts |
| 104 | Wiring as in item No.1 above a Ceiling/Exhaust Fan point. (b)Medium point uto 6mts |
| 105 | Drawing of Main and Sub-main line with DGSD approved VIR or PVC 250/440 Volt grade Copper Conductor complete with all accessories(b)With 2x4sqmm Copper Conductor |
| 106 | (c)With 2x6sqmm Copper Conductor |
| 107 | Drawing of 3 phase main line 4 wire with DGSD approved VIR or PVC cable 660 volt grade Copper Conductor in casing capping with all accessories(b)With 4x4sqmm Copper Conductor |
| 108 | (c)With 4x6sqmm Copper Conductor |
| 109 | Supplying & fixing of Load Kontaket Miniature Circuit Breakers DX3 MCB\"s for AC application till 63A |
| 110 | 59. Supplying fitting and fixing of Distribution Board SPN DB\"s for MCB Isolator,RCCB and RCBOA. IP 30- #1K 08.(b) 8Way + 8 Module |
| 111 | Supplying fitting and fixing of LED PANEL LIGHTING surface or wall mounted with all necessary accessories. (a) 2x2 (595x595x65)mm LED luminaire.(ii) 24W |
| 112 | Supplying fitting & fixing of Water heater (geyser) of 1.5Kw/3Kw with pressure release value including all necessary accessories as required. |
AI Tender Summary
Tender Timeline
May 07, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 26, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 26, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender