|
| 1 | Supply, installation testing and commissioning of solar operated post top LED of minimum 2000 lumens with IP65 & IK08 rating inner dia. of fitting shall be flexible for mounting on the pole LED fitting shall be suitable for minimum 24 hrs (2 Night) autonomy& its back up calculation sheet shall be got approved from Engineer-in- charge .The efficiency can be maximized by having automatic dimming profile as per battery state of charge condition lithium ferrophosphate battery.CRI >=70, luminous efficacy minimum 135 lm/W CE certified, charger >90%and standards IECs. The PV module should be make up of crystalline silicon solar cells \"Mono-Crystalline \" and must have a certificate of testing conforming to IECs, certifying above given parameters all reports shall be from in-houseNABL or IEC/ BIS or any internationalaccredited laboratory. Fitting shall be as per indicative drawing enclosed or as desired by Engineer-in- charge (to be installed on 3 M high pole) SYSTEM SIZE - 15W 135 LPW , 35Wp, 3.2V 48AH, Time based dimming. [ Dimming profile 4h 100%, rest 50%] |
| 2 | Supply, installation. testing and commissioning of solar operated All in one (AIO) Aluminium housing, appearance of Solar AIO Shall be LED street light of minimum 3000 lumens with IP65 &IK08 rating, inner dia. of fitting shall be flexible for mounting on the existing pole LED fitting shall be suitable for minimum 24 hrs (2 Night) autonomy & its backup calculation sheet shall be got approved from Engineer-in -charge. The efficiency can be maximized by having automatic dimming profile as per battery state of charge condition. Lithium Ferra Phosphate Battery. CRI>=70, luminous efficacy minimum 150 lm/W, CE Certified, charger efficiency >90% and standards IECs. The PV module should be made up of crystalline silicon solar cells Monopoly Crystalline and must have a certificate of testing conforming to IECs applicable, certifying above given parameters all reports shall be from in-house NABL or IECO or any international accredited laboratory fitting shall be as per indicative drawing enclosed or as desired by Engineer-in charge. (to be installedon 4 M high poles with single arm) SYSTEM SIZE - 20W 150 LPW , 60Wp, 12.8 V 30AH, [ Dimming profile 4h 100% , rest 50%] |
| 3 | Supply, installation testing and commissioning of solar operated all in one (AIO), appearance ofSolar AIO shall be LED street light of minimum 6000lumenswith IP65 & IK 08 rating, inner dia. of fitting shall be flexible for mounting onthe exiting pole, LED fitting shall be suitable for minimum 24 hrs (2 Night) autonomy & its backup calculationsheet shall be got approved from Engineer-in-charge. The efficiency can be maximized by having automatic dimming profile as per battery state ofcharge condition. Lithium Ferro Phosphate Battery. CRI>=70, luminous efficacy minimum 150 Im/W, CE Certified , charger efficiency >90% and standards ICEs. The PV module should be made of crystalline silicon solar cells: Mono/poly -Crystalline and must have a certificateof testing conforming to IECs/BIS. Certifying above given parameters all reports shall be from in-houseNABL or IECO or anyinternational accredited laboratory. Fitting shall be as per indicative drawing enclosed or as desired by Engineer -in-charge (to be installed on 8 M high pole with four arm/ ring) System size - 40W 150 LPW , 100Wp, 12.8V 60AH[ Dimming profile 4h 100% , 4H 50%] |
| 4 | Supplying, installation, testing and commissioning of solar operated Gate/ Entrance LED light fittings of minimum 100 lumens with IP65rating, inner dia. of fitting shall be flexible for mounting on pipe/wall LED fitting shall be suitable for minimum 12 hrs ( 1 night) autonomy & its backup calculation sheet shall be got approved by Engineer -in-charge. The efficiency can be maximized by having automatic dimming profile as per battery state of charge condition. Lithium Ferro Phosphate battery, CRI>=70,luminousefficieny minimum 100 lm/W, CE certified , charger efficiency >90% and standards IECs. Fitting shall be as per indicative drawing enclosed or as desired by Engineer-in-charge (to be installed on gate). System size - 1W 100 LPW , 10Wp, 3.7 V 10.2AH , 1 NIGHT BACKUP. |
| 5 | Supplying, erection ofminimum 3 M high (nominal) circular pole made out of 100 mm dia GI pipe \"B\" Class confiriming to IS 1239 duty welded with GIbase plate of size 300mmx300mmx12mm thick including supports between base plate and poles, as approved by Engineer-in-charge including (on the existing foundation) making suitable mounting arrangement of light luminaries, comprising of the following accessories their alongwith anchor/template -1 No. Earth stud i/c arrangement for incoming and outgoing cable wire painted with PU Paint after applying a cost of primer, connection, interconnection etc as required. |
| 6 | Supplying , erection, testing and comissioning of hot dip GalvanizedOctagonal pole of 4 mtr. Height made from 3 mm thick sheet having bottom 130 mm OAF & Top 70 mm OAF with welded base plate of size 200mmx200mmx12mm thick (on the existing RCC foundation) i/c providing 1 no. pole arm of suitable lenght made of suitable dia GI pipe \"B\" Class confirming to IS 1239, numbering of poles etc. completed as per drawing approved by Engineer -in-charge & technical specifications attached etc as required. |
| 7 | Supplying , erection, testing and comissioning of hot dip GalvanizedOctagonal pole of 8 mtr. Height made from 4 mm thick sheet having bottom 200 mm OAF & Top 90 mm OAF with welded base plate of size 275mmx275mmx16mm thick (on the existing RCC foundation) i/c providing hot dip galvanised circular ring having suitable dia MS Pipe B-class/having 4 Nos. arms of suitable lenght made of suitable dia GI pipe \"B\" Class confirming to IS 1239, numbering of poles etc. completed as per drawing approved by Engineer -in-charge & technical specifications attached etc as required. |
| 8 | Providing and laying in position 1:2:4 ( 1 cement: 2 Coarse sand : 4 graded stone aggregate)RCC foundation of size 400 mm (L) x 400 mm (W) x 1200 mm (D) (For min. 3 Mtr. & 4 Mtr. Poles) i/cexcavation of earth, re-filling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 1350 mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia - 1600 mm long (approx)-9 Nos. on 150 mm spacing including supply and fixing of one set comprizing of 4 Nos. 16 mm dia 600 mm long J type foundation bolts(threaded portion shall be galvanized) along with 3 Nos. GI nuts and 2 Nos. GI washer per bolt, 2 Nos. DWC pipe of 32/40 mm dia. of suitable length embeded in the foundation for drawing of incoming & outgoing cable after excavation for foundation , dressing of sides and ramming of bottoms, lift upto 1.5 mtr and getting out the excavated soil and disposal of surplus excavated soil as directed by Engineer-in Charge etc. complete as required.. The Tor steel used in Foundations shall be ISI marked. |
| 9 | Providing and laying in position 1:2:4 ( 1 cement: 2 Coarse sand : 4 graded stone aggregate)RCC foundation of size 500 mm (L) x 500 mm (W) x 1600 mm (D) (For upto 8 Mtr. height Poles)i/cexcavation of earth, re-filling, providing, cutting, bending and placing in position, reinforcement of cold twisted bars of 12 mm dia- 1760 mm long (approx)- 8 Nos. and reinforcement ring of cold twisted bar of 8 mm dia - 2000 mm long (approx)-12 Nos. on 150 mm spacing supply and fixing of one set comprizing of 4 Nos. 20mm dia 700 mm long J type foundation bolts(threaded portion shall be galvanized) along with 3 Nos. GI nuts and 2 Nos. GI washer per bolt, 2 Nos. DWC pipe of 63 mm. dia. of suitable length embeded in the foundation for drawing of incoming & outgoing cable after excavation for foundation , dressing of sides and ramming of bottoms, lift upto 1.5 mtr and getting out the excavated soil and disposal of surplus excavated soil as directed by Engineer-in Charge etc. complete as required. The Tor steel used in Foundations shall be ISI marked. |
| 10 | Supplying, installation, testing and commissioning of LED bollard fitting made up of Extruded Aluminium with Al. die-cast base in powder coat finish with inverted pyramid shape with height of 800 mm complete with all accessories including making connection. LED bollard fixture of not more than 12 watt and lumens output not less than 720 Lm. Fitting shall be as per indicative drawing attached or as per direction of Engineer-in-charge. |
| 11 | Supplying, installation, testing and commissioning of LED Uplight fitting circular shape made up of Extruded Aluminium with Al. Die cast base in powder coat finish complete with all accessories including making connection & interconnection. |
| 12 | Supply, installation, testing and Commissioning of 25 W LED warm white in ground Linear Wall Washer luminaire with aluminium extruded housing, of following wattage. The beam angle of the fitting shall be narrow, medium, wide or asymmetric as per the requirement. Luminaire shall be complete with driver and capable of operating at line voltage without any separate power supply from 100 to 270 V AC, 50 Hz, power factor > 0.9. Fixture shall be suitable to operate at ambient temperature range of -10°C to +50°C and shall be IP 66 rated. Lifetime should be at least L70:50000 burning hours at 50°C. Luminaire shall be conforming to BIS and shall be complete with all necessary accessories required for proper working of fixture including weather proof connection cables, water proof connectors etc. as required . |
