|
| 1 | Excavation in trenches not exc 1.5m widthand not exc1.5 min depth and getting out forlaying of pipes etc in soft/loose soil . |
| 2 | Returning filling in including spreading levelling watering and ramming in layers not exceeding 25 cm in any type ofsoil. |
| 3 | Removing excavated surplus soil to a distance not exceeding50M where directed and at a level not exceeding 1.5 M above the starting point. |
| 4 | M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge ofseze 100 mm bore. |
| 5 | All as per ser item no 4 above but of size 150 mm bore. |
| 6 | All as per ser item no 4 above but of size 200 mm bore. |
| 7 | All as per ser item no 4 above but of size 250 mm Bore |
| 8 | All as per ser item no 4 above but of size 300 mm bore. |
| 9 | Supply and lay DI pipe centrifugally cast of class K-7 with spigot and socket endssuitable for tyton jointsincluding rubber gasket for size 100 mm bore. |
| 10 | All as per ser item no 5 above but of size 150 mm bore. |
| 11 | All as per ser item no 5 above but of size 200 mm bore. |
| 12 | All as per ser item no 5 above but of size250 mm Bore |
| 13 | All as per ser item no 5 above but of size 300 mm bore. |
| 14 | Material and labour for fixing DI specialssuch as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of size upto 150 mm bore . |
| 15 | All as per ser item no 6 above but of sizeAbove 150 mm bore. |
| 16 | Supply and Fixing for DI sluice valve PN-1.6 incl new rubber gasket, nuts and bolts brass spindle etc and dismentling of existing unserviceable one of size 80 mm bore. |
| 17 | All as per ser item no 7 above but of size100 mm bore. |
| 18 | All as per ser item no 7 above but of size 150 mm bore. |
| 19 | All as per ser item no 7 above but of size200 mm bore. |
| 20 | All as per ser item no 7 above but of size300 mm bore. |
| 21 | Material and labour for repairing the leakage oflead joints for CI/DI pipe incl bailing out the line water after burning out the existing lead from joints and using extra lead and spun yarn as requiredand directed of size 80 mm bore.-Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 22 | All as per ser item no 8 above but of size 100 mm bore. |
| 23 | All as per ser item no 8 above but of size150 mm bore. |
| 24 | All as per ser item no 8 above but of size 200 mm bore. |
| 25 | All as per ser item no 8 above but of size250 mm bore. |
| 26 | All as per ser item no 8 above but of size300mm bore |
| 27 | All as per ser item no 8 above but of size350/375mm bore |
| 28 | Supply and fix LRC joint /Detachable jointfor repairing the leakage of any type of joint forCI/DI pipe at spigot socket end andincl bailing out the line water as requiredand directedof size 80 mm bore.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 29 | All as per ser item no 9 above but of size100 mm bore. |
| 30 | All as per ser item no 9 above but of size150 mm bore. |
| 31 | All as per ser item no 9 above but of size200 mm bore. |
| 32 | All as per ser item no 9 above but of size250 mm bore. |
| 33 | All as per ser item no 9 above but of size300 mm bore. |
| 34 | Material and labour for repairing the leakage offlange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etcbailing out the line wateras requiredand directedof size 150 mm bore.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 35 | All as per ser item no 10 above but of size 200 mm bore. |
| 36 | All as per ser item no 10 above but of size 250 mm bore. |
| 37 | Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site of soze 15mm bore. |
| 38 | All as per ser item no 11 above but of size 20mm bore. |
| 39 | All as per ser item no 11 above but of size25mm bore. |
| 40 | All as per ser item no 11 above but of size40mm bore |
| 41 | All as per ser item no 11 above but of size 50mm bore. |
| 42 | All as per ser item no 11 above but of size80mm bore. |
| 43 | M&L galvanised iron pipe medium grade (ISI marked) with and includingfittingsmedium grade (ISI Marked)concealed or fixed to walls, celling or laid in floors including chase cuttings where required, making good to distributed surfaces as per existing as directed and specified of size 15mm bore.Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate by the tenderer. Make: Jindal, Prakash Surya, Tata. |
| 44 | All as per ser item no 12 above but of size 20mm bore. |
| 45 | All as per ser item no 12 above but of size 25mm bore. |
| 46 | All as per ser item no 12 above but of size 50mm bore. |
| 47 | Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked)laid in trenches jointed and tested complete all as specified and directed for theof size 15mm bore.Make: Jindal, Prakash Surya, Tata |
| 48 | All as per ser item no 13 above but of size20mm bore. |
| 49 | All as per ser item no 13 above but of size 25mm bore. |
| 50 | All as per ser item no 13 above but of size 40mm bore |
| 51 | All as per ser item no 13 above but of size 50mm bore. |
| 52 | All as per ser item no 13 above but of size 80mm bore |
| 53 | Supply and fix gun metal gate valve with iron wheel head screwed both ends for iron pipe and fixed ofAll as per ser item no 14 above but of size 15 mm dia incl taking down and removal from site.Make: Normax, Sant, Zoloto |
| 54 | All as per ser item no 14 above but of size 20 mm dia |
| 55 | All as per ser item no 14 above but of size 25 mm dia. |
| 56 | All as per ser item no 14 above but of size 50 mm dia |
| 57 | Dismentling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate PCC block 20 cm thick wall massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate inclframe made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of size1050 x 1200 x 1000mm |
| 58 | All as per ser item no 15 above but of size 900 x 600 x 1000mm |
| 59 | All as per ser item no 15 above but of size450 x 450 x 600mm |
| 60 | All as per ser item no 15 above but of size 2500 x 2200 x 1500mm and PCC bolck wall thickness 30 cm |
| 61 | Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts forconnection from existing 50-200 mm bore CI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site. |
| 62 | S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20 mm bore. |
| 63 | S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25 mm bore. |
| 64 | Material and labour for laying of pipe of size 15 to 200 mm bore under road crossing by trenchless technology by aguring or mechnical means in any type of soil. |
| 65 | M & L for road cutting and repairing the same with road patch material width upto 75 cm all as specified and directed by EIC.Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a panelty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill. |
| 66 | M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in support of pipes or foundationof pump complete all as directed. |
| 67 | M&L 15 mm thick cement plaster in cum (1:6) on brick/stone/PCC surface fair and even complete all as directed |
| 68 | S&F CI foot valve threaded/flanged as required of size 50mm bore ball type. |
| 69 | All as per ser item no 23 above but of size 80mm bore ball type. |
| 70 | All as per ser item no 23 above but of size 100mm bore ball type. |
| 71 | All as per ser item no 23 above but of size 150mm bore ball type. |
| 72 | All as per ser item no 23 above but of size 200mm bore. |
| 73 | S&F CI Non Return Valveof size 150mm bore. |
| 74 | All as per ser item no 24 above but of size 200mm bore. |
| 75 | S&F DI air release valve with two air outlets, 50mm dia bore and fixing up in cast iron/ DIwater supply mains |
| 76 | S&F DI air release valve with two air outlets, 80mm dia bore and fixing up in cast iron/ DIwater supply mains |
| 77 | M&L for repair of CI/DI/GI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line ofsize 350 mm borein break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit , Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor. |
| 78 | All as per ser item no 27 above but of size300 mm bore |
| 79 | All as per ser item no 27 above but of size250 mm bore |
| 80 | All as per ser item no 27 above but of size200 mm bore |
| 81 | All as per ser item no 27 above but of size150 mm bore |
| 82 | All as per ser item no 27 above but of size100 mm bore |
| 83 | All as per ser item no 27 above but of size80 mm bore |
| 84 | M&L for painting of sluice valve/NRV upto 100mm dia as per existing colour complete all as specified. |
| 85 | M&L for painting of sluice valve/NRV 150/200mm dia as per existing colour complete all as specified. |
| 86 | Supply and fixing for CI Butterfly valve (ISI Marked) size 150 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant |
| 87 | Supply and fixing for CI Butterfly valve (ISI Marked) size 200 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant |
| 88 | Taking up raising/ delivery DI water mains 100mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket with nut bolts & washers of any size and relaying the same with using new gasket / tyton jointcomplete all as specified and as directed. Note :- During the taking up/down if any damage/broken in pipe line/fittings and any cable, etc contractor will replaced new with same size and will be deemed to be included in the rate quoted by contractor. |
| 89 | All as per ser item no 28 above but of size 150 mm bore |
| 90 | All as per ser item no 28 above but of size 200 mm bore |
| 91 | All as per ser item no 28 above but of size 300 mm bore |
| 92 | Taking out old & Supply and fixing, weldingwhereever required to shape in existing position vertical/horizental , connecting flanged end/welding in length of 3 mtr/6 mtr, MS pipeheavy dutytesting after connecting complete all as directedon by inserting of new tees, branches etc all as specified and directedof size 100 mm.Note:-(Tee, joints shall be inclusive in the cost ). |
| 93 | All as per item ser No 33 above but for size 150 mm bore. |
| 94 | All as per item ser No 33 above but for size 200 mm bore. |
| 95 | M&L for painting of Valve Chambar plaster portion with cement base and steel portion with synthetic enamel paint of any size |
