|
| 1 | Providing & fixing in position of Flat/Wedge Seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(75 mm dia x 12 mm th.) |
| 2 | Providing & fixing in position of Top and Side Seal including preparation of surface complete in all respects and to entire satisfaction of Engineer in charge.(100/44) |
| 3 | Supply, Providing and fixing of Stainless steel Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects. |
| 4 | Supply, Providing and fixing of Galvanized Bolts & Nuts (for seals of all types) with washer of all sizes and length required as per sample / drawing / direction of Engineer-In charge complete in all respects. |
| 5 | C.I Housing cover with worm and worm wheel assembly, shaft, handle, Gun metal bush with triple start threading inside for spindle complete including labour charges. |
| 6 | Supply of spindle for hoist machanism including threading and machinning complete in all respects and to entire satisfaction of Engineer in charge 65mm dia(Up to 2.5 tonne Capacity) |
| 7 | Supply and fixing of Spindle Cover |
| 8 | Supply and fixing of Common Shaft duly machined at site complete in all respects and to entire satisfaction of engineer in charge |
| 9 | Providing and Fixing of Coupling for Common Shaft complete in all respect and to entire satisfaction of Engineer In charge. |
| 10 | Fixing and Holding the gate with the help of 35 tonne capacity crane. |
| 11 | Commisioning & testing of Gates at site complete in all respects and to entire satisfaction of Engineer In charge. |
| 12 | Painting of gate leaf with primer coat and two coats with Anti corrosive Bitumastic paint to give an even shade with special quality paint. |
| 13 | Painting two coats with ready mix synthetic enamel paints over one coat metal primer |
| 14 | Providing and Fixing Skin Plate 10mm |
| 15 | Supply of multi purpose Synthetic hetiv grease |
| 16 | Supply of Mobil Oil |
| 17 | Providing and fixing horizontal & vertical stiffner, Hook Plate,stiffner Angle, Gate wheel Cover Plate, square baron Gates and Deck structure. |
| 18 | Drilling/Boring hole including rimming complete in all respects and to entire satisfaction of engineer in charge |
| 19 | Providing and Fixing Fischer Bolts (Size 16x300mm ) |
| 20 | Providing and Fixing Stainless Steel Flat |
| 21 | Providing of roller/ hook pin in position complete in all respects and to entire satisfaction of Engineer in-charge. (upto 75 mm /above 75 mm) |
| 22 | Fillet Welding with high strengthsteel rods completein all respectsand to entire satisfaction of engineer incharge (6mm) |
| 23 | Centering and shuttering for faces of walls, partitions, retaining walls and the like (vertical or battering including attached pilasters buttresses etc. (CSR item no. 9.2) |
| 24 | Reinforced cement concrete M-25 mechanically batch mixed using batch type concrete mixer as per IS:1791 and vibrated by needle vibrator but excluding steel reinforcement centring and shuttering in foundation and plinth (CSR item no. 10.16) |
| 25 | Providing & Fixing Gate Wheel Assembly (Size Upto 150 Ø) complete in all respects and to entire satisfaction of engineer-in-charge(including Gun Metal Bush ,Roller Pin) |
| 26 | Any Other Item |
