Tender For 1.Repairing And Colouring Work Of Ganna Bhawan Saharanpur - Demolishing brick work mannualy by mechanical means including stacking of servicable material and disposel of unservisable material within 50 m leadas per direction in Engineer in chargein cement mortor 2 Dismentling old mud phuskha in terracing and disposel of material within 50 m lead 3 Dismantling door, windowand clerestory window ( steel or wood ) shuter including chaukts stacking within 50 m lead Of area 3 Sq meter and below 4 Dismantling old brick soling including stacking of old dismantled bricks 5 M-150 brick work in 1:6 (one cement and six coarse sand of 2.25 fineness modulus) mortar in super structure including supply of all materials, labour and T & P etc required for proper completion of the work. 6 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 7 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth no extra for mixing any additive. (1) 1 cement : 6 coarse sand. 8 Supply and laying G.S.B.by well gradea material 9 Providing and laying of Interlocking concrete block pavement having thicknes 80mm thick I Shaped as per drawing and technical specification 10 Cement concrete pavement with 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) including finishing complete 11 Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to openings /wooden frames with rawl plugs screws etc. 12 Providing and fixing panelled or panelled and glazwd shuter for door window and clearstory, window fixing with but hinges required size with necessary screw 30mm thick shutters 13 Provinding and fixing glass panes with putty and glazing clips in steel doors, windows,clerestory windows all complete with : 4.0 mm thick panes. 14 Providing and fixing fly proof galvanized M.S. wire gauge to window and clerestory window using wire gauge with average with of aperture 1.4 mm in both direction with wire of dia 0.63 mm all complete 15 Providing and fixing ist quality ceramic glazed wall tiles confirming to IS: 15622 ( thickness to be specified by the manufacture ) of approved make in colour shade except burgundy bottle green black any ize as approved by Engineer in charge 16 Providing and laying Vitrified tiles in floor without lean concrete of 600x 600mm sizes (thickness 10mm), with water absorption less than 0.08% andonforming to IS:15622, of approved brand & manufacturer, in desired colours and shades, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, including grouting of joints. Same as above but for 600X600mm size. 17 Providing & laying brick Coba 120mm thick laid with M-150 class brick bat coba 7.50 cm thick with gap of 15mm to each other, over 20mm thick base of cement mortar 1:4 cement and coarse sand mixed with water proofing compound spreading cement slurry mixed with acrylic cement concrete water proofing compound filled gaps of 18 Excavation in foundation in ordinary soil (Loam, clay or sand )including lift upto 1.50 M. and lead upto 30 M. 19 Providing and layingin cement concrete 1:4:8 (1 cement :4 coarse sand :8 graded stone ballast 40 mm nominal size) and curing complete,including cost ofform-work,in foundation and floors. 20 R.C.C. work with cement approved coarse sand and 20 mm. guage approved stone grit im the proportion of 1:1.5:3 in lintels of doors and windows excluding supply of reinforcement and its fixing and binding the same with 24 BWG binding wire and including necessary centering and shuttering etc.and also including supply of all materials, labour and tools and plants etc, required for proper completion of the works. strength of the concrete shall not beless than M-200. 21 As in item no. 6 above but for slabs (Using 1:1.5:3 Mix concrete). 22 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 23 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 24 G.I.Metalcelling lay in perforated Tegular gdge globa white colour tiles of size 595x595 and 0.5mm thick with 8 mm drop made of G.I sheet having galvanized of 100 gm/sqm bothmm in true horizental leval suspended on inter locking metel grid of hot dipped galavanizedteel section 25 52 mm thick cement concrete floring with concrete hardene rtoping under layer 40 mm thick cement concrete 1:2:4( 1 cement : 2 coarse sand an d4 graded stone aggregate 20mm nominal size and top layer 12 mm 26 Proiding and Rubbing old concrete floor 27 Less old received bricks 28 Received old brick ballast cost 29 Supply of 36 Watt to 46 Wattindoor Recess mountingLED Square Fitting for Armstrong Ceilinghaving Powder coateddie cast aluminium housing body withextended heat sink and diffuser ofSpecial Polycarbonate meterial and driver set complete in all respect. 30 Supply and fixing of LED Tube Light with Metal heavy duty Box type batten Light fitting 1X22 watt suitable for upto 1X22 watt LED Polycarbonate tube light complete Including tube suitable for both surface & suspended complete in all respect.CAT. - AAA 31 Wiring point for light point/fan point with 1.5 sq.mm FR P.V.C. insulated multistrandsingle core Copper Conductor cable in heavy gauge rigid steel conduit pipepartly concealedin wall&partlylaidin slab along with the reinforcement before concreting complete with 14 S.W.Gcopper earth continuity wire&piano typeswitchetc. complete in all respects. 32 Wiring for light / power plug with 2x4 sq mm FLRSH PVC insulated copper conductor single core cable in surface / 33 Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. 2 x 1.5 sq. mm. In 20 mm dia conduit. 34 Supply & wiringofsubmainwithFR P.V.C. insulated1100 volts grade singlecorecopper conductorcable in heavygaugerigid steel coduit partly concealedinwall and partly laid inslab alongwith the reinforcement before concreting complete withone no. 14 SWGcopperearth continuity wire complete in all respects. 2 x 2.5 sq. mm.In 20 mm dia conduit. 35 Providing and fixing water closet squatting pan (Indian type W.C. pan ) with 100 mm sand cast Iron P or S trap, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required Same as above but for European type W.C. pan with white plastic seat and lid 36 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever requireWhite Vitreous China Flat back wash basin size 550x 400 mm with single 15 mm C.P. brass pillar tap. 37 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 38 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A including jointing with seal ring conforming to IS: 5382 leaving 10 mm gap for thermal expansion . (i) Single socketed pipes. a) 110mm diameter 39 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work) Exposed on wall20mm dia nominal outer dia pipes 40 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipe with clamps at 1.00m spacing.This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge.(internal work) Exposed on wall 25mm dia nominal outer dia pipes 41 Providing & fixing CP brass bib cock of approved quality conforming to IS 8931a) 15mm nominal bore 42 Providing & fixing C.P. brass angle valve for basin mixer and gyser points of approved quality conforming to IS 8931. a) 15mm nominal bore 43 Providing & fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. a) 15mm nominal bore 44 Providing and fixing gun metal gate valve with wheel of approved quality. a) 32mm dia nominal bore 45 Providing and placing on terrace (at all floor levels) polyethylene water storage tank. IS:12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. 46 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 32 mm dia (for wash basin) 47 Providing and fixing flexible P.V.C. waste pipe for sink or wash basin including PVC waste fittings complete. 40 mm dia(for sink and urinal) 48 Providing & fixing white vitreous china flat back halfstallUrinalof 580x380x350 mm with white PVC automatic flushing cistern with fittings standard size CP brass flush pipe, spreaders with unions and clamps (all in C.P. brass) with waste fitting as per IS : 2556, C.I. trap with outlet grating and other couplings in CP brass including painting of fittings and brackets cutting & making good the walls & floors wherever required.One urinalbasin with 5 liter P.V.C. automatic flushing cistern 49 Providing & fixing pipes. 100mm dia sand cast iron S & S Pipe 50 Providing & fixing pipes. 75mm dia sand cast iron S & S pipe 51 Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. 100 mm 52 Providing lead Caulked joints to sand cast iron/centrifugally cast (spun) iron pipes & fittings of diameters. 75 mm 53 Providing and fixing to the inlet mouth of rain water pipe cast iron grating 15 cm diameter and weighing not less than 440 grams. 15 mm nominal bore 54 Providing and fixing ballvalve (brass) of approved quality complete. (High or low pressure with plastic floats).15 mm nominal bore 55 Providing & fixing 15 mm nominal bore CP brass bib cockof approved quality conformingtoIS 8931. 56 Providing & fixing 15 mm nominal bore C.P brass angle valve for basin mixer and geyser points of approved quality conformingto IS8931. 57 Demolishing brick work manully by meachinals means including stacking of servisable material and disposelof unservisable material 58 Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m.(5 fts.) and lead upto 30m.(100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-incharges upto a distance of 30 m.(100 fts.) from the foundation trenches. 59 Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation 60 As in item 6 but for thelighterbeams i.e. having spans upto 6 m. (Using 1:1.5:3 Mix concrete) 61 As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. 62 As in item 3 abovebut inR.C.C.Raft foundation and footingwithapproved stone ballast.(Using1:1.5:3Mix concrete) (1 cement : 1.5 coarse sand : 3 stone aggregates) M-20. 63 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 64 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) 65 Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in: Cement mortar 1:6 (1 cement : 6 coarse sand) 66 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand 67 Providing & applying a coat of residual petroleum bitumen of grade VG-10 of approved quality using 1.7kg per square metre on damp proof course after cleaning the surface with brushes and finally with pieceofclothlightly soaked in kerosene oil. 68 6 mm cement plaster of mix 1:3 (1 cement : 3 fine sand) 69 Excavation in foundations in ordinary soil (Loam clay or sand) including lift upto 1.5 m.(5 fts.) and lead upto 30m.(100 fts.) & including filling. watering and ramming of excavated earth into the trenches or into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth as directed by the Engineer-incharges upto a distance of 30 m.(100 fts.) from the foundation trenches. 70 Providing and laying Cement concrete 1:4:8 (1 cement : 4coarse sand : 8 graded stone ballast 40 mm nominal size) including supply of all materials.labour and T&P etc. required for proper completion of the work and curing complete. also including cost of formwork in foundation 71 As in item 3 abovebut inR.C.C.Raft foundation and footingwithapproved stone ballast.(Using1:1.5:3Mix concrete) (1 cement : 1.5 coarse sand : 3 stone aggregates) M-20. 72 As in item 6 above but in R.C.C. columns in 1:1.5:3 having strength not less than M-20. 73 P/F Mild steel or iron in plain work such as reinforced concrete or reinforced, brick work (when not included in over all rates ) wrought to required shape as necessary including bending for proper completion of the work and including supply of steel its wastage bend hooks and authorised over lapping shall be measured upto floor two level. 74 12mm cement plaster in single coat on fair side of single or half brick wall for exterior plastering up to floor two level including internal rounded angles chamfers, and/or roundedangles not exceeding 80mm in girth and finished even and smooth. 1 cement : 6 Course sand 75 M.S or iron work in hold fasts Door/Window/Ventilator 76 Less old received bricks cost1 (a) 77 Less old received bricks ballast cost 78 Removing or dry or oil boin distemper water proofing cement paint and the like by scrapping papering and preparing the surface smooth including necessary repair to scretaches 79 Providing wall Cement Based Putty on New surface with approval quality material of berger/J.K./Birla or Similar make 2 coats. 80 Distempering with 1st quality acrylic distemper, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 81 Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade : New work (Two or more coats applied @ 1.43 ltr/ 10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/ 10 sqm). 82 Painting two coat over priming coat (but including cost of priming coat) on steel and other metal surfaces up to 10 cm. width or girth or small articles not exceeding 0.10sqm in area white superior synthetic enamel such as LUXOL3,Hi-gloss apcolite superlac, DULUX specified brushing to give an even shade and including cleaning the surface of all dirt,dust and other foreign matter sand papering and stoping including cost of all materials, labour tools and plants etc. required for proper completion of the work. 83 Varnish with varnish of approved brand and manfactureTwo or more coat of glue sizing with copal varnishing over an under coat of flatting varnishing
