|
| 1 | 1. Jagabandu Market to Bhagirath Para-II(L=13.885 km) (TR-04-120) (Link-022) under Dumburnagar block |
| 2 | Clearing and Grubbing Road Land |
| 3 | Clearing and grubbing road land including uprooting wild vegetation , grass, bushes, shrubs,saplings and trees of girth upto 300 mm , removal of stumps of such trees cut earlier and disposal of unserviceable materials and stacking of serviceable material to be used or auctioned, upto a lead of1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness as per Technical Specificationclause 201. |
| 4 | By Manual Means |
| 5 | In area of non-thorny jungle |
| 6 | Granular Sub-base with Well Graded Material ( Table 400.1 ) using Jhama Brick Aggregate |
| 7 | By Mix in Place Method |
| 8 | Construction of granular sub-base by providing well graded material ( Jhama Brick Aggregate , as per Table 400.1 ), spreading in uniform layers with tractor with attachments on prepared surface, mixing by mix in place method with rotavator at OMC, applying and brooming sand to fill up the interstices of coarse aggregate, watering and compacting with smooth wheel roller to achieve the desired density, complete as per Technical Specification Clause 401. |
| 9 | For Grading - IIMaterial ( jhama brick aggregate ) |
| 10 | Water Bound Macadam Sub-Base / Base using Jhama Brick Aggragate |
| 11 | WBM Grading 3 |
| 12 | Providing, laying, spreading and compacting jhama brick aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing rolling with three wheel roller 80-100 kNin stages to proper grade and camber, applying and brooming,binding materials to fill up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405. |
| 13 | By Manual Means |
| 14 | Prime Coat |
| 15 | Low porosity |
| 16 | Providing and applying primer coat with bitumen emulsion (SS-1) on prepared surface of granular base including cleaning of road surface and spraying primer at the rate of 0.70- 1.0 kg/sqm using mechanical means as per Technical Specification Clause 502 |
| 17 | Tack Coat |
| 18 | Providing and applying tack coat with bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.20 to 0.25 kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503 |
| 19 | 20 mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/ modified bitumen) Binder |
| 20 | Providing , laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base , including mixing in a suitable plant, laying and rolling with a three wheel 80 - 100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type A or Type B or Type C or Type D as per Technical Specification Clause 508 |
| 21 | Case -II : By Mechanical Means |
| 22 | Bitumen VG-30 |
| 23 | Seal Coat |
| 24 | Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type A or Type B or Type C or Type D as per MoRD Technical Specification Clause 510 |
| 25 | By Manual Means |
| 26 | Case - IV : Type D (with fine sand) |
| 27 | Bitumen VG-30 |
| 28 | C. SH: ROAD SIDE DRAIN |
| 29 | Surface Drains |
| 30 | Construction of unlined surface drains of average cross-sectional area 0.4 sqm in ordinary soil to specified lines, grades, levels and dimensions. Excavated material to be used in embankment with a lift upto 3 m and lead of 50 m (average lead 25 m) as per Technical Specification Clause 307. |
| 31 | Surface Drains in Ordinary Soil |
| 32 | Manual Means |
| 33 | Road side Pucca Drains |
| 34 | Construction of road side pucca drain with M10 ( 1:3:6 with jhama brick aggregate)to specified lines, grades, levels and dimensions as per approved design and Technical Specification Clause 307, 1606. Excavated material to be used in embankment at site. |
| 35 | Trapezoidal drain ( top clear width 600 mm, bottom clear width 300 mm and clear depth of 400 mmIn Ordinary Soil |
| 36 | Kilometre Stone ( with RCC M15 grade using jhama brick aggregate ) |
| 37 | Reinforced cement concrete M15 grade ( using jhama brick aggregate ) kilometre stone/local stone of standard design as per IRC:8 fixing in position including painting and printing, etc. as per drawing and Technical Specification Clause 1703. |
| 38 | Ordinary Kilometre Stone(precast) |
| 39 | 5th KM Stone (precast) |
| 40 | 200 m Stone(precast) |
| 41 | Construction of RCC guide posts of 250 mm dia and total 600 mm long,(300 mm below GL ) M15 grade cast-in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC posts not to exceed 1 in 500 as per drawing and Technical Specification Clause 1401.6 |
| 42 | A. In ordinary soil |
| 43 | Providing and Fixing \"Logo\" of PMGSY Project |
| 44 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25 mm x 5 mm size on back on edges. The lower plate will be welded with MS angle iron frame of 25 mm x 25 mm x 5 mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75 mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450 mm x 450 mm x 600 mm , 600 mm below ground level. The top most diamond plate will be welded to middle plate by 47 mm x 47 mmof 12 SWG steel plate tube. All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing Clause 1701 and Annexure 1700.1 |
| 45 | Providing and Fixing \"Citizens\" Information Board\" of PMGSY / Bharat Nirman Project |
| 46 | Providing and fixing of typical Citizens\" Information board with Logo as per MORD specifications and drawing. Two MS Plates of 2.0 mm thick, duly welded with MS flat iron 50 mm x 5 mm size on back on edges. The flat iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 76.1 mm OD (horizontal) and 2 Nos. 76.1 mm OD (Vertical) steel tube posts { as per IS : 1161 - 1979, Medium Class } duly embedded in cement concrete M-15 grade blocks of 600 mm x 600 mm x 750 mm , 750 mm below ground level.All M.S. will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour. All sections of framed posts and steel tube and flats will be painted with primer and two coats of epoxy paint as per drawing and specification Clause 1701 and Annexure 1700.1(B) Board - \"B\" |
| 47 | Retro-reflectorised Traffic Signs |
| 48 | Providing and fixing of retro-reflectorised cautionary, mandatory and informatory sign as per IRC:67 made of encapsulated lens type reflective sheeting vide Clause 1701.2.3 fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M 15 grade cement concrete (using jhama brick aggregate ) 450 mm x 450 mm x 600 mm, 600 mm below ground level as per approved drawings and Technical Specification Clause 801 |
| 49 | with 600 mm equilateral triangle aluminium sheeting |
| 50 | with 600 mm circular aluminium sheeting |
| 51 | ● The upgradtion cost is inclusive of GST @ 18% and ● Maintenance amount is pre-specified by the authority as mentioned above. |
