Rural Development Government Departments Closing in 0 days TDR #48996838

Construction Of Hll Bridge -Mgsy24-25Mahua-02

Issued by Government Departments · mahua, Bihar
Tender Value
1.71 Crore
Estimated cost
Bid Submission
09 May 2025
0 days left
EMD
3.42 Lakhs
Bank guarantee accepted
Document Fee
10000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
mahua → Bihar
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Construction Of Hll Bridge -Mgsy24-25Mahua-02

BOQ

Name of Work:MGSY24-25Mahua-02
Sl. No. Item Description
1FOUNDATION
2Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.
3i) Upto 3m depth
4Providing and laying of PCC M15 levelling course 100mm thick below the foundation
5II. PCC Grade M-15 (Levelling Course)
6Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.
7RCC M-30
8Supplying, fitting and placing HYSD bar reinforcement in foundation complete as per drawings and technical specifications Clauses 1000 and 1202
9Confirmatory boring at Abutment and Pier Location
10SUBSTRUCTURE
11R.C.C. grade M-30 in Substructure complete as per Dwg & Tech Specification
12i) Upto 5m height (Using Batch mix plant)
13Backfilling behind abutment, wing wall and return wall complete as per drawings & technical specification Clause 1204.3.8
14I) Sandy Material
15Providing and laying filter media with granular crushedaggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specificationClause 1204.3.8
16SUPERSTRUCTURE
17Providing and laying cement concrete wearing course M30 grade including reinforcement complete as per drawing and technical specifications Clauses 800 and 1206.3
18Construction of RCC railing of M30 Grade in-situ with 20 mm nominal size aggregate, true to line and grade, tolerance of vertical RCC post not to exceed 1 in 500, centre to centre spacing between vertical post not to exceed 2000 mm, leaving adequate space between vertical post for expansion, complete as per approved drawings and technical specifications.
19Drainage Spouts complete as per drawing and technical specifications Clause 1209
20P.C.C. M-15 ordinary grade (1:2.5:5) levelling course below approach slab complete as per drawing and technical specificatios Clauses 800 & 1211.
21Reinforced Cement Concrete M-25 grade approach slab including reinforcement and formwork complete as per drawing and technical specifications Clauses 800 and 1211
22Providing and fixing in position 20 mm thick premoulded joint filler in expansion joint for fixed ends of simply supported spans not exceeding 10 m to cater for a horizontal movement upto 20 mm, covered with sealant complete as per drawing and technical specifications.
23PROTECTION WORK
24Flexible Apron :Construction of flexible apron .45 m thick comprising of loose stone boulders weighing not less than 40 kg beyond curtain wall.
25Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.
26Plain/Reinforced Cement Concrete in Open Foundation complete as per Drawing and Technical Specifications.
27RETAINING WALL
28Earthwork in excavation for structures as per drawing and technical specifications Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material and disposal upto a lead of 50 m, dressing of sides and bottom and backfilling in trenches with excavated suitablematerial.
29Stone masonry work in cement mortar 1:3 in foundation complete as drawing and Technical Specification
30Providing weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall with 100 mm dia AC pipe extending through the full width of the structures with slope of 1(V):20(H) towards drawing face complete as per drawing and technical specification Clauses 614, 709, 1204.3.7
31Providing and laying filter media with granular crushedaggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specificationClause 1204.3.8
32SUB HEAD : PREPARATORY WORKS ,SITE CLEARANCE , DISMANTLING
33Clearing and Grubbing Road Land (By manual means)including uprooting wild vegetation , grass ,bushes ,shrubs , saplings and trees ofgirth upto 300mm , removals of stumps of such trees cut earlier & disposal of unserviceable materials & stacking of serviceable materials to be used or auctioned upto a lead of 1000 m including removal and disposal of top organic soil not exeeding 150mm in thickness as per technical specification - clause 201.1 and direction of E/I
34Construction of embankment with approved material deposited at site and obtained from road way cutting and excavation from drain and foundation of other structures graded and compacted to meet requirement of tables 300.1 and 300.2 as per technical specification clause 301.5
35Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .
36Construction of subgrade and earthen shoulders with approved material obtained from borrow pits with all lifts and leads, transporting to site, spreading, grading to required slope and compacted to meet requirement of Table 300.2 with lead upto 1000 m as per Technical Specification Clause 303.1.
37Sub Head : PAVEMENT LAYERS - GSB & WBM ITEMS
38Granular Sub-base with Coarse Graded Material (Table 400.1)
39Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method
40WBM Grading 3 (By Mechanical Means)
41Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with threewheel 80-100 kN static roller in stages to proper grade and camber, applying and brooming, crushable screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3 as per Technical Specification Clause 405.
42SUB HEAD : Surface Course
43Providing and applying primer coat with bitumen emulsion on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.60 kg/sqm using mechanical means.
44Providing and applying tack coat with Bitumen emulsion (RS-1) using emulsion distributor at the rate of 0.25 to 0.3kg per sqm on the prepared bituminous surface cleaned with Hydraulic broom as per Technical Specification Clause 503.
45Providing and laying semi dense bituminous concrete with 100-120 TPH batch type HMP producing an average output of 75 tonnes per hour using crushed aggregates of specified grading, premixed with bituminous binder @ 4.5 to 5 per cent of mix and filler, transporting the hot mix to work site, laying with a hydrostatic paver finisher with sensor control to the required grade, level and alignment, rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction as per MoRTH specification clause No. 508 complete in all respects.
46Providing and fixing of retro- reflectorised cautionary, mandatory and informatory sign as per IRC :67 made of high intensity grade sheeting vide clause 801.3, fixed over aluminium sheeting, 1.5 mm thick supported on a mild steel angle iron post 75 mm x 75 mm x 6 mm firmly fixed to the ground by means of properly designed foundation with M15 grade cement concrete 45 cm x 45 cm x 60 cm, 60 cm below ground level as per approved drawing
47SUB HEAD : TEMPORARY DIVERSION
48Construction of Embankment with material obtained from borrow pits with a lift upto 1.5 m , transporting to the site spreading , grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 with a lead upto 1000 m as per Technical Specification Clause 301.5 .
49Grannular Sub-Base Gr-I - Construction of granular sub-base by providing coarse graded material, spreading in uniform layers with motor grader on prepared surface, mixing by mix in place method.
50Laying Reinforced cement concrete pipe NP4/Prestressed concrete pipe on first class bedding in double Row.
51900 mm equilateral & triangle
52(I)Providing and Fixing \"Logo\" of Project
53( II ) Providing & Fixing of LOGO of\"Citizen Information Board\"
54( III ) Providing & Fixing of LOGO of\"Maintenance Board\"
55Providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of
56LABOUR 1%
57Seigniorage Fee
58GST 18%
59Maintainance for 1st year
60Maintainance for 2nd year
61Maintainance for 3rd year
62Maintainance for 4th year
63Maintainance for 5th year
64LABOUR 1%
65Seigniorage Fee
66GST 18%

AI Tender Summary

OUR REF NO 48996838
AUTHORITY Government Departments
TENDER VALUE 1.71 Crore
LAST DATE 09-05-2025
Authority
Authority Name Rural Works Department
Work Description Construction Of Hll Bridge -Mgsy24-25Mahua-02
Basic Detail
Tender No MGSY/24-25/Mahua/02
Bidding Type Tender
Location
City mahua
State Bihar
Key Dates
Publish Date 03 May 2025
Submission Date 09 May 2025
Open Date 09 May 2025
Finance
Tender Value 1.71 Crore
Tender Fee 10000
EMD 3.42 Lakhs
Exemption Not Available
Document List
d819dde8-65d9-430c-ae35-f1219439ac80.html
BOQ_219520.xls
CMBD_MGSY.pdf
Tendernotice_1.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 03, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
May 09, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
May 09, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
html

d819dde8-65d9-430c-ae35-f1219439ac80.html

xls

BOQ_219520.xls

pdf

CMBD_MGSY.pdf

pdf

Tendernotice_1.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender