Tender For Supplying And Stacking Of Various Materials For Mgnrega Anganvady Centre Work, vythiri-Kerala

Supplying And Stacking Of Various Materials For Mgnrega Anganvady Centre Work, 1.01 Stone for masonry work 1.02 Through and bond stone size 24 x 24 x 39cm 1.03 Portland Cement 1.04 Coarse sand (zone III) 1.05 wall form panel 1250x500 mm 1.06 100 mm channel shoulder 2.5 m long 1.07 Double clip (bridge clip) 1.08 Single clip 1.09 M.S. Tube 40 mm dia 1.1 Twisted steel/deformed bars 1.11 Stone Aggregate(single size):20 mm nominal size 1.12 Stone Aggregate(single size): 10 mm nominal size 1.13 Hire charges of Concrete Mixer 0.25 to 0.40 cum withHopper 1.14 Vibrator (Needle type 40 mm) 1.15 laterate stone of size 40x20x15cm 1.16 Structural steel such as tees, angles, channels andR.S. Joists 1.17 Red oxide Zinc chromate primer 1.18 Adjustable telescopic prop 3 m (2.02-3.75m) 1.19 Beam clamp 300-380 mm (450-1070 mm) 1.2 Adjustable span ESO+SI (2.35-3.40) 1.21 Solid blocks of size 30x20x15cm 1.22 Fine sand (zone IV) 1.23 Vitrified floor tile 60x60 cm 1.24 Bright finished or black enameled mild steel butthinges 75x47x1.70 mm 1.25 Wall form panel 1250x450xmm 1.26 Corner angle 45x45x5 mm 2.50 long 1.27 Column clamp 450x1070 mm 1.28 Prop 2 m (2-3.5m) 1.29 Multi surface paint 1.3 Special primer (C.W) 1.31 48 mm X40 mmX1.5 mm thick Factory made doorframe of PVC extruded sections in white, grey orwooden finish 1.32 24 mm thick Factory made shutters with styles, railsand panels of PVC extruded sections in white, grey orwooden finish 1.33 Anjili wood scantls 1.34 Bright finished or black enameled mild steel butthinges 100x58x1.90 mm 1.35 Bright finished or black enameled mild steel butthinges 50x37x1.50 mm 1.36 Bright finished or black enameled mild steel screws 40mm 1.37 Bright finished or black enameled mild steel screws 20mm 1.38 Stone Aggregate(single size): 06 mm nominal size 1.39 Average rate of mild steel round bars forreinforcements 1.4 Mild steel round bar 12 mm dia and below 1.41 Flats up to 10 mm in thickness 1.42 Anjili wood planks 1.43 Float glass sheet of nominal thickness 4 mm (weightnot less than 10 kg/sqm) 1.44 200 mm Aluminium aldrop 1.45 Water thinnable cement primer for interior wallsurface, having VOC content less than 50 gms/litre 1.46 Plastic emulsion paint 1.47 Synthetic enamel paint in black or chocolate shade 1.48 Vitreous China orrisa type w.c. pan size 580 mm 1.49 Flushing Cistern P.V.C. 10 lts capacity (low level)(white) (with fittings, accessories and flush pipe) 1.5 100 mm S.C.I. trap with vent heel 1.51 Vitreous china flat back wash basin 550x400 mm 1.52 15 mm C.P.brass tap 1.53 C.P. brass waste 32 mm 1.54 C.I. bracket for wash basin and sinks 1.55 Stainless steel kitchen sink - without drain board470x420 mm bowl depth 178 mm 1.56 Polyethylene water storage tank with cover andsuitable locking arrangemnet 1.57 PVC pipe 20 mm outer dia 10 kfg/cm2 1.58 PVC pipe 50 mm outer dia.6kgf/cm2 1.59 PVC pipe 63 mm outer dia . 6kgf/cm2 1.6 PVC pipe 110 mm outer dia 6kgf/cm2 1.61 PVC 45 degree Elbow 63 mm dia 1.62 PVC door Elbow 63 mm dia 1.63 PVC bend 63 mm dia 1.64 PVC Tee 63x63x63 mm dia 1.65 PVC vent cowl 63 mm dia 1.66 PVC Elbow 110 mm dia 1.67 PVC bend 110 mm dia 1.68 15 mm PTMT bib cock 1.69 Material - 75 mm valve 1.7 Corner angle 45x45x5 mm 1.50 m long 1.71 Welding by electric plant 1.72 Interlocking C.C. paver block (80 mm thick, M-30) 1.73 Mild steel tube hot finished weld type

INR 2360 /-

INR 25100.0 /-

INR 10.03 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents-1	0 KB
Click here to download tender document	Tender Documents-1	0 KB
Click here to download tender document	Tender Documents-1	0 KB
Click here to download tender document	Tender Documents-1	0 KB
Click here to download tender document	Tender Documents-1	0 KB