|
| 1 | TYPE-1 STRUCTURESteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 2 | Foundation and Installation of Sign Boards complete with foundationwith 18mm 600 Mm Long 4 nos foundation BoltFoundation Size 450x450x900mm (0.182 cu.mtr) as per drawing per post. |
| 3 | Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade.(make Metaguise/Citadel/ Woodform Architectural or equivalent) |
| 4 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. Post 100mm Dia 8mm Thick M.S. PIPE |
| 5 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. M.S. Frame |
| 6 | TYPE-2 STRUCTURESteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 7 | Foundation and Installation of Sign Boards complete with foundationwith 18mm 600 Mm Long 4 nos foundation BoltFoundation Size 450x450x900mm (0.182 cu.mtr) as per drawing per post. |
| 8 | Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade.(make Metaguise/Citadel/ Woodform Architectural or equivalent) |
| 9 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. Post 100mm Dia 8mm Thick M.S. PIPE |
| 10 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. Back Frame 40mm |
| 11 | TYPE-3 STRUCTURESteel work in built up tubular (round, square or rectangular hollow tubes etc.) trusses etc., including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer, including welding and bolted with special shaped washers etc. complete. |
| 12 | Foundation and Installation of Sign Boards complete with foundationwith 18mm 600 Mm Long 4 nos foundation BoltFoundation Size 450x450x900mm (0.182 cu.mtr) as per drawing per post. |
| 13 | Design & Fabricating Ornamental work on mild steel (MS) sheets, which includes a series of detailed processes to achieve the desired design and finish through CNC cutting, which allows for precise and intricate patterns to be cut into the MS sheet based on the approved drawings and designs provided by the Architect in charge. Following the cutting process, etching and engraving are performed to add depth and detail to the design, enhancing the ornamental appearance. These processes involve carefully removing material from the surface to create the desired patterns and textures. After the cutting, etching, and engraving are completed, refilling is conducted to ensure the engraved areas are smooth and consistent with the overall design. This step ensures that the intricate details are highlighted and any imperfections are corrected. The MS sheet used for this work will be of an approved thickness to ensure structural integrity and durability. Additionally, the specification includes the cost of powder coating the MS sheet in an approved shade.(make Metaguise/Citadel/ Woodform Architectural or equivalent) |
| 14 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. Post 100mm Dia 8mm Thick M.S. PIPE |
| 15 | Supply and application of Steel Guard Nano Coat, a ready-to-use, water-based, eco-friendly anti-rust coating for steel surfaces. Suitable for TMT bars, sheet metal, and industrial structures. Applied by brush, spray, or dip.Passes 2000-hour salt spray test at 65 microns, ASTM-D3359 (5B), enhances steel nobility from -0.44V to +1.2V, and increases bond strength by 100–300%. Stable from -200°C to +400°C. Coverage: 150–250 sq. ft/litre. Color and shade will be approved by an architect in charge. Back Frame 40mm |
| 16 | Providing & fixing of reflective signs made out of made out of retro reflective sheeting of micro prismatic grade conforming to IRC-67: 2022 & TypeXI standards of ASTM D4956-09 specifications with2mm aluminium sheet/ 4 mm thick aluminium composite panelwith back frame MS angle of 35x35x5 mm, Special Inks used for printing letters/ legends/ directions/ theme shall be certified for low volatile organic compound emission & shall be water based ink (non solvent & non eco solvent ink) with durability of 10 years atleast. The reflective sheeting signage facia shall be covered with ultra voilet overlaminate transparant film 10 years Warranty for Retro Reflective Sheeting from the original sheeting manufacturer & a certified copy of three years outdoor exposure report from an government test lab report of 3 year conducted in India condition for the product offered shall be submitted by the contractor. Technical specification along with test report, PQ must be submitted along with the tender of all the quoted item and same should be issued via OEM in the name of the bidder.proper completion of work as per direction of Engineer in Charge. |
| 17 | G.S.T Extra as per applicable |
