|
| 1 | Supply,Installation, Testingat works and commissioningof LED lighting system consisting of separate suitabledriveras per technical specificationLED street lights of rating 45 W/120W/150W, luminaire efficacy of 130 lm/W, CRI 85+/-5 CCT 5700K+/- 350K, IP66, Ik 10 beam angle of 150 x 70 deg. as per tender specifications as per the enclosed \"Technical specifications & Scope of work\" TSS No.1 |
| 2 | 45 Watt Garden LightLED (POST TOP) |
| 3 | 120 WattLEDLiminaries |
| 4 | 150 Watt LED Luminaries |
| 5 | Supply, Installation, Testing and Commissioning of following Hot Dip Galvanised octagonal street light pole [with inbuilt terminal box for cable connection], made of Structural Steel (3 mm thick) of grade S355 [as per European Standard EN 10025], Is: 875 part 3, Is: 800- 2007, Is: 6533 Part 2, 1989, BS 5649- 1985 alongwith base plate, arm bracket & foundation bolts. Junction box should be provided 500 mm above base plate with cable connector of 4 Nos brass terminals for 25 sq.mm XLPE Al. conductor cable on epoxy insulator,1 no 6A SP MCB & 1 no. neutral link mounted on 4 mm thick bakelite sheet, 2mm GI gland plate etc. Base plate should have 4 nos holes suitable for mounting on RCC foundation 200 mm above FGL. as per the enclosed “Technical Specification & Scope of Work\" TSS No.2 |
| 6 | 3 mtr high Hot Dip Galvanised HR Steel ( 3 mm thick) Octagonal street light pole having bottom of 130 mm A/F, Top 70 mm A/F with cap and suitable size reducerfor installation of garden light Base plate 200 x 12 mm PCD- 200 mm Door opening 100 X 500 mm as per IS 2062 Foudation Bolt sets ( Each set contains 4 nos. of Foundation bolts) \"J\" type M16 X 600 mm long[EN 8 grade, 4 nos. per pole]. Projected Bolt Length: 100mmWasher: Suitable plain washer for the aforesaid bolts(1 no. per bolt). Nut:Suitable nuts for the aforesaid bolts(3 nos. per bolt). |
| 7 | 7 m high Hot Dip Galvanised HR Steel ( 3 mm thick) Octagonal street light pole having bottom of 130 mm A/F, Top 70 mm A/F Base plate – Size: 250mm X 250mm X 16 mm PCD – 200 mm),Door opening 100 x 500 mm as per IS – 2062.Foudation Bolt sets ( Each set contains 4 nos. of Foundation bolts) \"J\" type M24 X 750 mm long[EN 8 grade, 4 nos. per pole]. Projected Bolt Length: 100mmWasher: Suitable plain washer for the aforesaid bolts(1 no. per bolt). Nut:Suitable nuts for the aforesaid bolts(3 nos. per bolt). |
| 8 | supply, Installation of Sword/ Cap typeSingle ArmBracket ofLemgth 1.5 Mtr. |
| 9 | 9 m high Hot Dip Galvanised HR Steel ( 3 mm thick) Octagonal street light pole having bottom of 155 mm A/F, Top 70 mm A/F Base plate – Size: 250mm X 250mm X 16 mmPCD – 250 mm), Door opening 100 x 500 mm as per IS – 2062. Foudation Bolt sets ( Each set contains 4 nos. of Foundation bolts) : \"J\" type M24 X 750 mm long[EN 8 grade, 4 nos. per pole]. Projected Bolt Length: 125mmWasher: Suitable plain washer for the aforesaid bolts(1 no. per bolt).Nut:Suitable nuts for the aforesaid bolts(3 nos. per bolt). |
| 10 | supply, Installation of Sword/ Cap typeDouble ArmBracket ofLemgth 1.5 Mtr. |
| 11 | Making M-20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity as 10T/ sq.mtr. at a depth of 1.5 mtr including supply of steel, concrete,fixing provided nut bolts with the help of template, duly plastered as per design for 3 meter high Hot Dip Galvanised octagonal street light pole , as per Drawing and the “Technical Specification & Scope of Work”. TSS No.20 |
| 12 | Making M-20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity as 10T/ sq.mtr. at a depth of 1.5 mtr including supply of steel, concrete,fixing provided nut bolts with the help of template, duly plastered as per design for 7 meter high Hot Dip Galvanised octagonal street light pole , as per Drawing and the “Technical Specification & Scope of Work”. TSS No.20 |
| 13 | Making M-20 grade reinforced cement concretefoundation by considering the safe soil bearing capacity as 10T/ sq.mtr. at a depth of 1.5 mtr including supply of steel, concrete,fixing provided nut bolts with the help of template, duly plastered as per design for 9 meter high Hot Dip Galvanised octagonal street light pole , as per Drawing and the “Technical Specification & Scope of Work”. TSS No.20 |
| 14 | Supply,Installation, Testing and commissioning of 50mm dia Round shapeClass B GI pipe pieces ( Each of 3 meter lengthwith bend angle as per site requirement) on fencing wall made up of stones including existing LED fixtures as per the “Technical Specification & Scope of Work”. TSS No.3 |
| 15 | Supply,Installation, Testing and commissioning of 50mm dia, Class B Round shape GI pipe pieces ( Each of 3 meter lengthwith bend angle as per site requirement) on perimeter wall of building including existing LED fixturesas per the “Technical Specification & Scope of Work”. TSS No.3 |
| 16 | Supply, Fabrication & Installation of Mild Steel items as per the “Technical Specification & Scope of Work”. TSS No.4 |
| 17 | Supply and Installation of Weather proof (FRP) IP66Loop-in-loop-out box os size 300 x 200 x 125 mm for new50mm dia G I pipelight pole with required size GI clamp, nut bolts, GI glanding plate and4 pole brass Cable connector mounted on epoxy resin insulator termination kit with 01 no. 6A AC MCB C curve suitable size insulator studs, nut & bolts inside FRP street light box along with end connections as per the “Technical Specification & Scope of Work”. TSS No.5 |
| 18 | PaintingofG I pipe (light mounted on buliding perimeter wall & fencing wall ) with two coats of Aluminium paints,as per the “Technical Specification & Scope of Work”. TSS No.6 |
| 19 | As Built layoutdrawing, Stensiling and numbering of light poles (including wall mounted lights inside BRIT/ BARC complex) ,as per the “Technical Specification & Scope of Work”. TSS No.6 |
| 20 | Supply and delivery of following 1.1 kV grade XLPE insulated, Aluminium Conductor,steel/galvanizedround armoured cable, cored laid up with HR PVC type ST2 inner sheath and outer sheath FRLS of extruded PVC type conforming to IS 7098 (Part-1) 1988 [with latest amendment, if any], as per the enclosed “Technical Specification & Scope of Work” TSS No.7 |
| 21 | 4C x 16 sq.mm |
| 22 | 4 C X 25 sq.mm |
| 23 | 4C x 35 sq.mm |
| 24 | Supplying and installation of 8 SWG GI wire for earthing or any other purposes along with power cableon wall with 5mm thick G.I. Spacers & 2mm thick G.I. Saddle painting with two coats of black bituminous paint for earth wire/ strip in ground & green enamel paint for earth wire /strip on surface etc.necessary GI clamps fixed on wall/ cable/ conduit with screws complete as per the “Technical Specification & Scope of Work” TSS No. 14. |
| 25 | Installation, Laying, testing & commissioning of 4 C / 3½ C 1.1 kV grade XLPE Cable [ 10 mm2 to 50 mm2], Excavation in all type of soils including hard rock and cutting asphalt road Making trench in Hard murum/Tar road having 0.75 m depth and minimum 0.3mtr width as per IS for laying provided cables up to voltage level1.1Kv cable complete as per specification , sand bedding, laying of baked bricks on side and top, back filling, dewatering, consolidation shoring, disposal of excess earth. Items includes supply of sand and class- I bricks and reinstate to original state, as per the “Technical Specification & Scope of Work” TSS No. 7 |
| 26 | 4 C x 25 sq. mm |
| 27 | Making 1:3:6 Cement concrete with 20 to 25 mm stone duly plastered with necessary curing for complete as per enclosed \" Technical Specifications & Scope of Work\" TSS No. 20 |
| 28 | Installation, Laying, testing & commissioning of 4 C / 3½ C 1.1 kV grade XLPE Cable [ 10 mm2 to 50 mm2] includinginstallation of 8 SWG G I wire along on perimeter wall of building and fencing wallas per the “Technical Specification & Scope of Work” TSS No. 7 |
| 29 | 4 C X 25 sq.mm on walls & existing trenches with suitable size GI saddles & fisher plates at distance of 300 mm interval. |
| 30 | 4 C X 16 sq.mm on walls & existing trenches with suitable size GI saddles & fisher plates at distance of 300 mm interval. |
| 31 | 4C x 35 sq.mmon walls & existing trenches with suitable size GI saddles & fisher plates at distance of 300 mm interval. |
| 32 | Supply & Installation ofend termination of following XLPE insulated armoured cables, including supply and fixing of weather proof single compression flange type gland (complete with brass gland, brass ring & rubber ring etc.), solderless socket, tapes, anti-corrosive paste & jointing materials and copper lugs suitable for cable/ conductor of following sizes as per the “Technical Specification & Scope of Work” TSS No.8 |
| 33 | 4 C X 16 sq. mm |
| 34 | 4C X 25 sq. mm |
| 35 | 4C x 35 sq.mm |
| 36 | Supply, Installation, Termination and connection of following sizes of flexible copper cable with suitable pin /ring type copper lugsas per \"Technical Specification & Scope of Work\" TSS No. 7 |
| 37 | 3C x 2.5 sq.mm |
| 38 | LT Cable routemarker with civil foundation block and tagging. \"Technical Specification & Scope of Work\" TSS No. 9 |
| 39 | Dismantling of existing old street light DB\"s / damaged GI poles mounted on building wall and fencing wall surface/ Tubular MS street light Poles upto height 9 mtr with brackets and buy back the same.Removal of existing RCC constructionfrom breaking of concrete and transportation as per TSS No. 10 |
| 40 | supply, laying and fixing 250 mm dia. RCC pipe NP2 class (light duty) inclusive of road cutting of width 800mm and depth 1000mm completee with RCC collars, jointing with cement mortar1:2 (1 cement, 2 fine sand) 100mm thick encasing the pipe with concrete of 1:2:4 grade, backfilling and concreting with M30 grade of 200mm thick and as per the attached drawing. \"Technical Specification & Scope of Work\" TSS No. 11 |
| 41 | Earth Excavation work by Mechanical means ( Hydraulic excavation )/ Manual means in all types of soil and hard rock/ bitumen road. Dressing the sides of foundation, ramming of foundation s etc. including shoring and dewatering ( if necessary) and refilling with selected excavated earth in layers of not more than 500 mm thick each layer well rammed and consolidated including disposing the surplus earth with in a distance of 200m all as per specifications and as directed by the Engineer In Charge. \"Technical Specification & Scope of Work\" TSS No. 19 |
| 42 | From 0 to 1.50 mtr depth from average Groung Level |
| 43 | Supply and embeddment of 40mm dia. HDPE pipein pole foundation (during casting ) separately for cable entry and cable exit including bending the pipe to the required shape complete as required.\"Technical Specification & Scope of Work\" TSS No. 13 |
| 44 | Supply and embeddment of 1.5 mtr. length, 25mm dia G.I. electrode (medium class) with maintenance free chemical earthing material (Bentonite )for individual street light pole earthing including supply of required length 8 SWG GI wire and end connection at both earth screws of pole etc. as per instructionsEIC \"Technical Specification & Scope of Work\" TSS No. 16 |
| 45 | Design, fabrication, Installation, testing of outdoor type street light Control Box at Manufacturers works, delivery at site, installation, testing and commissioning of Control Box and associated works as per drawing & bill of materials. \"Technical Specification & Scope of Work\" TSS No. 15 |
| 46 | Supply, installation, commissioning & testing of complete set of tinned copper Earth plate 600 mm x 600 mm x 3.15 mm thick of high grade quality including accessories and providing brick masonry block, PCC enclosure with cast iron chequered cover plate hot dip galvanized having lifting lug and locking arrangement and watering GI pipe of 3 meter length with 25 kg carbon based environment friendly back fill ground enhancing compound complete with all material, testingas per Is 3043 standard , as per \"technical Specifications and Scope of work\" TSS no.17 |
| 47 | Connecting the Street Light Control Boxto Earth Busbar including Supply, laying & fixing 25 mm X 3 mm tinned copper strip and making connection to Feeder Pillars with bolts, nuts, washers etc. on wall painted with insulating and non corrosive bond as per the enclosed “Technical Specification & Scope of Work” TSS No.18 |
| 48 | Supply and making of straight through jointing kit of heat shrinkable type of approved make suitable for cable of voltage grade 1100 v and for cable of size 4C x 25 /35 sq.mm (A2XWY) \"Technical Specification & Scope of Work\" TSS No. 12 |
| 49 | Supply and making of straight through jointing kit of heat shrinkable type of approved make suitable for cable of voltage grade 1100 v and for cable of size 4C x 16 sq.mm (A2XWY). \"Technical Specification & Scope of Work\" TSS No. 12 |
| 50 | Supply, Installation, testing & commissioning of outdoor type wall mounted luminaires control box for light fittings on building wall.\"Technical Specification & Scope of Work\" TSS No. 21 |
