|
| 1 | Overhauling and Servicing of 75 kVA Diesel Engine Alternator (M/s Kirloskar make, Model:RB66) set thoroughly by draining the sump, oil filter, fuel filters, removing the crank shaft, cam shaft, tapid, Cy. head assemply, etc completely, degreasing, cleaning, including checking of alignment and adjustment of different components and re-assembling the engine i/c S/F of gasket set, O ring set, sets of washers, main Oil seal, radiator hose, cleaning of radiator, engine sump, exhaust manifold, complete as required, etc, testing, checking and commissioning, complete as required |
| 2 | Supplying and Providing mobil oil of SAE-40 grade in the E/A set complete as reqd. (K-Oil, Castrol/Indian Oil or SS) |
| 3 | Servicing of fuel pump with injectors at Mico workshop for checking of injection, after dismantling from the engine, for automisation testing and replacing the element,nozzle, delivery valve, o rings and washers, etc and testing with the fuel pump etc complete as reqd. |
| 4 | Replacement of the following parts as per the original |
| 5 | Crank shaft gear |
| 6 | Cam gear |
| 7 | Fuel pump gear |
| 8 | OVER HAUL KIT |
| 9 | LUBE.OIL PUMP ASSEMBLY. |
| 10 | Replacement of faulty unserviceable pumpset with following capacity open well monobloc submersible pump motor set in the existing sump suitable for operation on 230 V, 50 Hz, 1 Ph AC supply along with associated starter unit and standard length of cable, including dismantling the existing pumpset, minor civil works etc as required (i) 1 HP, Single phase, pipe dimension 25x25 mm (suctionxdelivery), discharge 1.8 LPS, head in mtrs 21 m (M/s Kirloskar KOSi-135 or similar superior make) |
| 11 | Supplying and fixing of 3x2.5 sq.mm Flat Three Core PVC Insulated & PVC Sheathed, copper conductor, 1.1 KV grade, Industrial Cable for Submersible Pump Motors including connections as reqd.(BSNL approved make) |
| 12 | Supplying and laying of medium class CPVC pipe of 25 mm dia. (nominal)cutting to the required length, providing consumables, fixing with existing accessories etc as required |
| 13 | S/Fixing of the following CPVC pipe and fittinmgs as per BSNL approved make (a) 25 mm dia Union |
| 14 | (a) 25 mm dia Union |
| 15 | b) 25 mm dia Tee |
| 16 | c) 25 mm dia Elbow |
| 17 | d) 25 mm dia FTA |
| 18 | e) 25 mm dia Ball valve (CPVC) |
| 19 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable PVC box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc. as required. a) Group C |
| 20 | Supplying and fixing PVC batten/ angle holder including, connection etc. as require S/F of 12 Watt LED bulb, complete as reqd. |
| 21 | Supplying and fixingLED type 4 ft light fitting of20 Watt, 230V, 50HZ,including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Crompton/Havells or SS make) |
| 22 | S/F of 4 pole 100A Isolator, 415 V, 50 Hz. Including connection complete as reqd. |
| 23 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required a) 2x1.5 Sqmm +1x1.5 Sqmm |
