|
| 1 | Withdrawing of the 3 H.P. submersible pump and motor set along with column pipe after disconnection of pipe line and power line by help of derrick arrangement of the manual labour complete the job as per direction of EIC. |
| 2 | Supply and delivery ofclear water vertical wet type submersible pump sr conforming to IS : 8034 ( and as amended there after ) with standard MOC water and BEE 3 Star Rated capable of dischargirg noted M3/hr against the head of the water column The pump shall be directly coupled with a contineous rated 2 ploe suitable vertical wet type squirel cage induction motor conforming to IS : 9283 (or letest)operation in AC Three phases 415 V, (Test certificate,H&Q characterstic curve should be provided at the time of delivery) |
| 3 | a) Discharg -60 Cum per hour Head-25mtr 7.5 HP approx. |
| 4 | b) Discharg -50 Cum per hour Head-27 mtr .7.5 HP approx. |
| 5 | Supply and delivery of the following materials:- |
| 6 | a) 100 mm Ф 90 degree GIelbow . |
| 7 | b) 100 mm GI pipe heavy TATA |
| 8 | c) 100 mm Ф medium duty GI flange. |
| 9 | b)100 mm dia equal tee GI |
| 10 | 100 mm dia CIDF Non Return Valve conforming to I.S. : 5312, Part-I (P.N. 1.0), Make:IVI/Upadhyay/jupiter. |
| 11 | 440V relaty range 20-32 A FASD Motor starter with single phase preventor in a sheet steel enclosure.Make-Approved make.(Model MUG 15 or similar type) |
| 12 | 440V relaty range 6-10 A FASD Motor starter with single phase preventor in a sheet steel enclosure.Make-Approved make.(Model MUG 15 or similar type) |
| 13 | Supply, delivery & storage ofGleeserine type pressure gauge,cast Al. dial along with DN-15 GI impulse line with valve. |
| 14 | i) (0 – 6Kg.) 102 mm dia for individiual delivery header |
| 15 | ii) (0 – 25Kg.) 150 mm Ф for Common Header |
| 16 | Lowering of the above supplied submersible pump and motor set 7.5hp along with column pipe and fitting fixing well top cover on the Tube well including supply of nut bolt with washer gasket kit with sealing the tube well after connection of the pipe line and power line complete the job as per direction of EIC. |
| 17 | Cutting and welding charges of 200 mm dia Tubewell casing to reduce the height of the top of the pump delivery line and making interconnection after lowering of pump motor set .[200 cm per tubewell] |
| 18 | Supply and delivery of 6 sq.mm. 2 core PVC insulated XLPEAr. AL conductor cable,As Per IS-7098 (Part 1) 2011 with Up To Date Amendment |
| 19 | Laying on Wall / surface with Saddles / clampsLaying of cable upto 2 core 25 sqmm on wall/surface incl. S & F M S saddles with earthing attachment in 10 SWG GI (Hot Dip) Wire, making holes etc. as necy. mending good damages and painting |
| 20 | Laying of Al Ar cable along the lenth of River Bed with fixing & laying of Cable on 100mm dia GI delivery pipe linebinding withG.I Wireas per direction of E.I.C..from Kiosk boxto tubewell.a) 10 Sqmm 3 Core Al, Ar Cable |
| 21 | Supply delivery & fitting fixing of outdoortypeLED light fixture Operating Voltage 140V-270 V AC 50Hz , efficacy 130lm/w withfloodlight luminaire family with multiple lumen output options. Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP66 protection and high power single die ceramic base LEDs delivering M.No-BVP 120 LED 047 CW FLNB FG A1 PSU GRMake- Philips/equivalent model) |
| 22 | Supply delivery & fitting fixing of outdoortypeLED light fixture Operating Voltage 140V-270 V AC 50Hz , efficacy 130lm/w withfloodlight luminaire family with multiple lumen output options. Pressure die-cast aluminium housing with high impact resistance (IK07) glass cover IP66 protection and high power single die ceramic base LEDs delivering M.No-BVP192 LED177 CW NB FG A1 PSU GR SPD Make- Philips/equivalent model) |
| 23 | Supply delivery & fitting fixing of Indoor typeLED light fixture Operating Voltage 140V-270 V AC 50Hz , efficacy 150lm/w with PDC housing & toughened glass suitable for ceiling (Surface/Suspended) mount & available in Wide beam (Rotational Symmetric) optics.EnduraLED Midbay Robust & reliable IP66 & IK08 protected LED midbay M.No-BY515P LED200S 5700 NB S1 PSU GR of Philips/equivalent model) |
| 24 | Supply and fitting fixing on the wall1 x 22 watt single commercial type surface mounted LED Base tube light with complete set.Type -BN170C LED40S-6500 PSU L120 (4 ft)(Make Philips) |
| 25 | Supplying and fixing compression type gland complete with brass gland, brass ring & rubber ring for dust & moisture-proof entry of XLPE/PVC armoured cables as below :For 2 core 6 sqmm cable |
| 26 | Finishing the end of following XLPE/PVC armoured cables by crimping method incl. supplying and fixing solderless socket (Dowels make), tapes, anticorrosive paste & jointing materials :i) 2 core 6 sqmm cable |
| 27 | Painting of Steel Tubular Pole of lengths and no. of coats of paint,as given below with ready mixed paint/primer of approved make, and brand incl. preparation of surface by sand paper/emery paper, cleaning etc. for receiving fresh coat of paintUpto 9.0 mtr. long pole |
| 28 | i) One coat of red lead/Zinc chromate priming |
| 29 | ii) 1st coat of synthetic enamel paint over the primer |
| 30 | ii) 2nd coat of synthetic enamel paint over the 1st coat |
| 31 | a) Supplying and fixing 240/415V MCB Isolator on din rail of existing DBs and necessary connection.i) 40Amp DPMake-Havels/L&T/Legrand/Any Approved make |
| 32 | b) Supplying and fixing 240/415 V MCB of Breaking capacity 10kA & C characteristics on din rail of existing DBs and necessary connectionA) 16 A (SPN)Make-Havels |
| 33 | Supplying and fixing double-door SPN MCB Distribution Board with IP-42/43 protection, concealed in wall after cutting the wall & mending good the damages to original finish incl. Inter connection with suitable size of copper wire and neutral link & provision for earthing attachmenta) 2+4 wayMake-Havells Enclosure (DHDPSNODRW04) |
| 34 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required.(Ref PWD vol -II p/55) |
| 35 | Add: 18% GST |
| 36 | Add: 1% Cess |
