|
| 1 | Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete. (a) Depth of excavation not exceeding 1,500 mm |
| 2 | Single Brick Flat Soling of picked jhama bricks including ramming and dressing bed to proper level and filling joints with local sand. |
| 3 | Filling in foundation or plinth by silver sand in layers not exceeding 150 mm as directed and consolidating the same by thorough saturation with water, ramming complete including the cost of supply of sand. (payment to be made on measurement of finished quantity) B) Do- by fine sand. |
| 4 | Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement if any, in ground floor as per relevant IS codes.(Pakur Variety ) |
| 5 | Brick work with 1st class bricks in cement mortar (1:6)(a) In foundation and plinth |
| 6 | (b) In superstructure Ground floor. |
| 7 | Plaster (to wall, floor, ceiling etc.) withsand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/ staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] with 1:6 cement mortar15mm thick |
| 8 | 20mm thick |
| 9 | Neat cement punning about 1.5 mm thick in wall,dado,window sill,floor etc.Note : Cement 0.152 cu.m per 100 sq.m |
| 10 | Applying Exterior grade Acrylic primer of approved quality and brand on plastered or concrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly,complete as per manufacturer\"s specification and as per direction of the EIC.In Ground floor:(a) One coat |
| 11 | Protective and decorative Acrylic exterior emulsion paint of approved quality as per manufacture\"s specification and as per direction of Engineer in charge to be applied over acrylic primer as required. The rate includes cost of material,labour,scaffolding and all incidental charges but excluding the cost of primerIn Ground floor(Two coat)Normal Acrylic Emulsion |
| 12 | Labour for boring tube well of required dia. by water jet system through any type of soil strata including hire and labour charges for boring pipes,scaffolding, tools and plants as necessary and taking out them and lowering pipes, strainers, blind pipe etc. and fitting and fixing the same complete including bucket washing and other incidental works in the connection. The tube well should have a minimum 50 mm gap in between the outside of the tubewell pipe and the bore.For depth upto 150 metre for 80 mm dia. tube well wuth top enlargement of 150 mm dia.(iii) 80 mm dia. boring etc. |
| 13 | 150 mm dia. boring etc. top enlargement |
| 14 | Supplying brass-strainer with brass socket of approved make. (Heavytype(iii) 75 mm dia. |
| 15 | Supplying, fitting and fixing steel cutter piece upto 450 mm long withsockets.(iii) 75 mm dia. |
| 16 | Supplying, fitting and fixing plug of approved make conforming to I.S.specifications(iii) 75 mm |
| 17 | Supplying, fitting and fixing PVC pipes of approved make of Schedule 80 (medium duty) conforming to ASTMD - 1785 and threaded to match with GI Pipes as per IS : 1239 (Part - I). with all necessary accessories,specials viz. socket, bend, tee, union, cross, elbo, nipple, longscrew,reducing socket, reducing tee, short piece etc. fitted with holder batsclamps, including cutting pipes, making threads,fitting, fixing etc.complete in all respect including cost of all necessary fittings as required,jointing materials and two coats of painting with approved paint in any position above ground. (Payment will be made on the centre line measurements of total pipe line including all specials. No separate payment will be made for accesories, specials. ayment for painting willbe made seperately80 mm |
| 18 | 100 mm |
| 19 | 150 mm |
| 20 | Supply & Filling of Gravel 20mm to 30mm size |
| 21 | Supply & Filling of Barakar Sand size 0.5mm uniformity |
| 22 | Reinforcement for reinforced concrete work in all sorts of structures including distribution bars, stirrups, binders etc initial straightening and removal of loose rust (if necessary), cutting to requisite length, hooking and bending to correct shape, placing in proper position and binding with 16 gauge black annealed wire at every intersection, complete as per drawing and direction.(a) For works in foundation, basement and upto roof of ground floor/upto 4 m(i) Tor steel/Mild SteelJSW /JSPL / SHYAM / SRMB / BMASL / ELECTROSTEEL / SSL |
| 23 | Constructing Inspection pit to a depth of 1.5 metre (inside), 250 mm thick 1st class brick work (1:4) in all sides over a layer of jhama brick soling and 150 mm thick cement concrete with tone chips (1:3:6) including necessary earth work, fitting and fixing approved type S.W. master trap, constructing masonry invert with cement concrete (1:1.5:3) with stone chips, plastering inside and outside (outside upto 300 mm below G.L.) with 20 mm thick cement plastering (1:4) and neat cement punning,including supplying,fitting and fixing one 560 mm. dia R.C.C. anhole cover of approved make with R.C.C. slab of 100 mm thick with cement concrete (1:1.5:3) with stone chips including necessary reinforcement (upto 1%) and shuttering andnecessary corbelling brick work (1:4) so that the R.C.C. cover slab rests 150 mm above adjucent G.L., cement plaster (1:4) 10 mm thick on all external surfaces of the top slab as directed complete in all respect and removal of surplus earth with all costs of labour and materials (excluding the cost of master trap only).900 mm X 750 mm (inside) chamber including fitting and fixing S.W. mastertrap of 150 mm dia. of approved makeA) With Pakur variety. (Other than SAIL/TATA/RINL) |
| 24 | Supplying, fitting and fixing Stainless Steelrailingconsistof38mm diaand 900 mmheight vertical balustradeat every twoalternativesteps, 50mm dia top rail, 3 (three) nos 19mm dia horizontal Strainless steel pipe and base/cover plate with Strainless Steel GRADE 304containing7.5%nickle (InteriorGrade)Brushed/Mat finish, complete as per direction of the Engineer-in-charge. Weight of Strainless Steel railing per metre 6.5 Kg (approx) |
| 25 | Earthwork in filling in compound, tank, low land,ditchesetc.withgoodearth, in layersnot exceeding150mm.includingbreakingclodsandconsolidating the same by ramming and dressing complete.(Paymentwillbemadeonprofilemeasurementbefore and after the work)(ii) Withcarriedeartharrangedby thecontractor withinaradiusexceeding 3km. butnot exceeding5km. including the cost of carried earth. |
| 26 | Add GST @18% on Total of Sl.No.1to Sl.No. 19 i.e. onRs. 2535356.00 |
| 27 | Add Cess @1% on Total of Sl.No. 1 TO Sl. No. 20i.e. onRs. 2991720.08 |
