|
| 1 | Attending day to day complaints to carry out petty repairs related to water supply & plumbing worksuch asleakage of bib cock / pillar cock / stop cockangle valve, wall mixer, shower rose, health faucet/Jet spray, including removal of air lock/blockage of water in GI tubing of any description changing the washers, clearing of air lock in the pipe, leakage of low level or high level flushing cistern by adjusting the float valve including removal and replacement of rubber washer in PVC siphons,adjusting the float valve of overhead tanks, leakage of PVC bends/galvanised iron pipes etc., All T&P such as die set, washers of all size etc including necessary form work and scaffolding upto second floor, safety measures to make functional and leak proof, all petty materials likeTeflon tape,M-seal, screws, nails, cap etc. are deemed to be included in the unit rate quoted by the contractor on all working days from 0900 hrsto 1700 hours complete all as directed. |
| 2 | Attending and rectify day to day complaints related to joinery work such as repairs to door, windows, cupboard, kitchen shelves, pelmet boxes, curtain rod/bracket, easing of doors windows etc as ordered/required on all working days (Except Sunday & gazette holidays) 0900 hrs to 1700 hrs complete all as specified and directed.Note for Item No. 1 to 2:-(i) Contractor or his supervisor/site Engineer will report daily at 0900 hrs at complaint cell for collection of complaints from the concerned JE in-charge, in case after checking & attending the defects, if it is not possible to rectify the defects within 08 hrs, the facts shall be brought to the notice of JE than after to Engineer in charge by the contractor/ his rep immediately.If Engineer-in-charge is satisfied with contractor\"s view, no recovery will be made on this account.However, complaints related to sewage line blockage /pipe replacement etc whatever is applicable shall be attended on same day whether it is \"Sunday\" or \"Gazetted Holidays\" and nothing extra shall be payable to contractor on this account. |
| 3 | Note for Item No. 1 to 2 (Contd):-(ii)Contractor or his supervisor / site engineer will report daily at 0900 hrs at complaint cell for noting of day to day complaints in complaints register, issue of complaints slip to tradesmen and enter after completion in complaint register as instructed by JE,s. In case of absense of contractor rep for noting complaints, a penalty of Rs 500.00 per day will be deducted from the contractor bill.(iii)The complaint shall be attended & defects shall be rectified within 08 hrs i.e from 0900 hrs to 1700 hrs excluding Sunday & gazetted holiday, commencing from date and time of notifying the complaint slip failing which a Penalty @ Rs.500/- Per complaint per day (08 hrs) shall be levied upon / imposed on the contractor and necessary recovery shall be made from his dues on this account.(iv)The above all aspect shall be deemed to be included in the quoted rate of the respective item. |
| 4 | M&L in replacement of brass face spindle of existing 15mm dia bore bib cock, stop cock, angle valve, C P Pillar cock, Wash basin mixture and valve mixture of any description fixed in repairs complete all as specified and directed. |
| 5 | Removal of air lock/blockage of water in GI Tubing 15,20,25mm bore including taking down (if required) cleaning the pipe or fitting etc and refixing the same in position complete including new GI fitting if required for refixing complete all as specified and directed. |
| 6 | M&L for glazed ceramic colour designer concept glazed ceramic tilesin patches n exc 1 sqm each & matching with existing tile 200x300x7mm size as in walls set and jointed in neat cementslurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc including dismantling of skirting/ dado (terrezo/PCC/tiles of any description), cement mortarbedding (but not backing) and dismantling and removing the rubbish from the complex complete all as specified and directed. |
| 7 | M&L for glazed ceramic colour designer concept glazed ceramic tilesin patches n exc 1 sqm each & matching with existing tile 350x250x7mm /450x300x7mmsize as in walls set and jointed in neat cementslurry over and including 10mm thick backing coat in cement mortar (1:3) and pointed in coloured cement to match for work on vertical surface such as skirting dado etc including dismantling of skirting/ dado (terrezo/PCC/tiles of any description), cement mortarbedding (but not backing) and dismantling and removing the rubbish from the complex complete all as specified and directed. |
| 8 | M&L for non-skid coloured ceramic tiles 400x400x7mm of sizein patches n exc 1 sqm each & matching with existing tile7 to 8mm thick (square / rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqmin floors etcset and jointed in neat cement slurry andjointed in white/coloured cement to match over and including15 mm thick backing coat in cement mortarin(1:6), including demolition offloor (terrezo/ PCC/Tiles of any description), cement mortarbedding (but not backing) and dismantling and removing the rubbish from the complex complete all as specified and directed |
| 9 | M&L for non-skid coloured ceramic tiles 300x300x7mm of sizein patches n exc 1 sqm each & matching with existing tile7 to 8mm thick (square / rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqmin floors etcset and jointed in neat cement slurry andjointed in white/coloured cement to match over and including15 mm thick backing coat in cement mortarin(1:6), including demolition offloor (terrezo/ PCC/Tiles of any description), cement mortarbedding (but not backing) and dismantling and removing the rubbish from the complex complete all as specified and directed. |
| 10 | S&F in repairs of CP health faucet including necessary holding arrangements with screws etc complete all as specified and directed. |
| 11 | Dismantling of old Ceiling boards (Fibre, pulp, insulation, etc) or insulation boards /slabs blankets including cover fillets and frame work all as specified and directed. |
| 12 | S&F of Armstrong Board 12mm thick in ceiling fixed with screws all complete as per manufacturer’s instructions complete all as specified and directed. |
| 13 | S&F in repairs of Stainless Steel Soap Dish Holder all as specified and directed. |
| 14 | S&F in repairs of Stainless Steel paper holder with Flap Recessed Type all as specified and directed. |
| 15 | S&F in repairs of Corner Glass shelf with bracket complete all as specified and directed. |
| 16 | S&F in repairs of decorative wooden finished curtain rod mild steel chromium plated of 20 mmdia complete all as specified and directed. |
| 17 | S&F decorative wooden finished type chromium plated double brackets supports for holding curtain rods and corners to be fixed to ends of curtain with screws complete all as specified and directed. |
| 18 | S&F in repairs of 15 mm dia bib taps (fancy type), Chromium plated cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or forbrass ferrule with check nut 15mm bore complete all as specified and directed. |
| 19 | S&F in repairs of bib tap of PTMT any colour 15mm dia all as specified and directed. |
| 20 | S&F in repairs of 15mm bore stop valve of PTMT any colour screwed for iron pipe and fixed complete all as specified and directed. |
| 21 | S&F in repairs 20mm bore gun metal globe gate valve all as specified and directed. |
| 22 | S&F in repairs of stainless steel towel rack with lower hanger complete all as specified and directed. |
| 23 | S&F in repairs of brass chromium plated bottle trap 32mm bore for wash hand basin with inlet and outlet and screwed for pipe complete all as specified and directed. |
| 24 | S&F in repairs of existing chromium plated grating of size 125mm dia (with hole or without hole) for Nahani/Floor traps complete all as specified and directed. |
| 25 | S&F in repairs of 70 mm dia fancy type shower roses brass chromium plated with CP arms for 15mm bore GI pipe with 235 mm long shower arm complete all as specified and directed.Cera Model F- 7020106 |
| 26 | S&F in repairs of 15 mm dia two-way bib taps (fancy type), cast copper alloy with crutch or butter fly handle screwed down, screwed for iron pipe or for brass ferrule with check nut 15mm bore complete all as specified and directed. |
| 27 | S&F in repairs of 15mm dia bore wall mixer non-telephonic shower arrangement with connecting legs & wall flanges complete all as specified and directed. |
| 28 | S&F in repairs of 15 mm dia pillar taps (fancy type), cast copper alloy with capstan heads, chromium plated, handle screwed down high pressure, with or without lettered Hot or cold with long screwed shanks and fly nuts, screwed for crewed for iron pipe and fixed with check nut 15mm bore complete all as specified and directed. |
| 29 | S&F in repairs of 15mm dia angle cock with wall flange (Fancy type) complete all as specified and directed |
| 30 | S&F in repairs of 15mm stop valves, chromium plated fancy type screwed down high pressure with crutch or butterfly handle screwed both ends for iron pipe or for unions complete all as specified and directed. |
| 31 | S&F in repairs of PVC waste pipe 32/40 mm dia for urinal/ WHB/Sink all as specified and directed. |
| 32 | S&F in repairs of 15mm dia PVC connection600 mm long all as specified and directed. |
| 33 | S&F in repairs of 1mm thick kitchen laboratories sink with drainage board made of stainless steel with plugs, washer and wastes, including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915x 460x bowl size 410x330x160mm complete all specified and directed. |
| 34 | S&F in repairs of 1mm thick kitchen or laboratory sinks made of stainless steel with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 35 | S&F in repairs of 110/110mm bore PVC (SWR) P trap all as specified and directed. |
| 36 | S&F in repairs of 110/110mm bore PVC (SWR) S trap all as specified and directed. |
| 37 | S&F in repairs of 110mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including flat iron claim for proper fixing complete all as specified and directed. |
| 38 | S&F in repairs of 110mm dia PVC(SWR) bends complete all as specified and directed. |
| 39 | S&F in repairs of 75mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to wall including flat iron claim for proper fixing complete all as specified and directed. |
| 40 | S&F in repairs of 75mm dia PVC(SWR) bends complete all as specified and directed. |
| 41 | S&F in repairs of 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 42 | S&F in repairs of shelf of PTMT fixed with and including chromium plated brass screws and wooden/plastic cleats (minimum weight 300gms) complete all as specified and directed. |
| 43 | S&F in repairs of 50mm bore high density polyethylene pipes of pressure ratings 6 kgf/cm2 fixed to walls, floors, ceiling etc. complete all as specified and directed. |
| 44 | M&L in repairsfor 75mm dia of outlet PVC Nahani trap with grating including jointing to waste pipe fixed in cement concrete type B-1 (1:2:4) complete all as specified and directed. |
| 45 | S&F in repairs of vitreous china squatting pan \"orrisa\" pattern white colour of size 580x440mm with integral foot rests including provision of lime concrete complete all as specified and directed. |
| 46 | S&F in repairs for vitreous china wash basin white flat back size 550x400 including cutting for and pinning in ends of brackets and fixing of 32mm low density polyethylene pipes (LDPE)of pressure rating 6kg/cm2, coupling, PVC connection with 15 mm PTMT check nuts, brackets complete all as specified and directed. |
| 47 | S&F in repairs of 10ltr capacity PVC valve less syphonic action type flushing cistern low level white with inlet ball valve, float & handle including brackets complete all as specified and directed |
| 48 | S&F in repairs of 500 litres rotational moulded polyethylene water storage tank (cylindrical vertical with threaded type closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type lockable cover complete all as specified and directed. |
| 49 | S&F in repairs of 1000 litres rotational moulded polyethylene water storage tank (cylindrical vertical with closed top) hoisted and jointed in position all as specified in SSR Part-I including disconnecting existing tank and providing all necessary fittings for connecting with pipe line, threaded type cover complete all as specified and directed. |
| 50 | S&F in repairs of wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed |
| 51 | S&F in repairs plastic EWC seat cover of white colour for pedestal pan, closed pattern with flat bottom & cover including MS chromium plated, aluminised hinging devices complete all as specified and directed. |
| 52 | Taking down and re-fixing of old steel tubing connection in new or old position (wall etc) including cleaning for re-fixing bore of pipe 15mm dia complete all as specified and directed. Note: - New GI fittings such as elbow, socket, Tee, Union, Nipple are included in rates if required for re-fixing of pipe. |
| 53 | All as per Ser item No 51 above 20mm bore of pipe. |
| 54 | S&F in repairs of stainless steel wire cloth, 0.45 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and as directed |
| 55 | Taking down door chowkats or frames not exceeding 1.5 sqm with shutters (without taking off shutters from the frame) of any description all as specified and directed. |
| 56 | All as per item No 54 above but exceeding 1.5 sqm but not exceeding 4 sqm all as specified and directed. |
| 57 | Taking down shutters of any description exc 1sqm and n.exc 2sqm each all as specified and directed. |
| 58 | S&F of 2nd class hard wood (SAL) plain, solid, straight chowkats and frames, wrought, framed rebated on the solid, rounded or chamfered put together with glue, pinned atjointscompleteall as specified and directed. |
| 59 | S&F of 35mm thick Flush shutters, solid core construction, with block board core and plywood face panels, commercial type on both sides complete all as specified and directed. |
| 60 | S&F of 35mm thick second class hard wood glazed and skeleton shutter for doors open rebated and prepared to receive glass, gauge etc divided into squares with plain chamfered or mitred and rebated sash bars any number, edges or framing, plain chamfered or rounded fitted with beads for securing glass gauge size of members of shutters as specified in SSR part I complete all as specified and directed. |
| 61 | S&F of continuous (piano) hinges, mild steel, bright finish of electrogalvanized 30 mm width of flap complete all as specified and directed. |
| 62 | M&L in repairsfor Prelaminated particle board,19 mm thick interior grade, prelaminated one side with decorative choice lamination and other side balancing white lamination, fixed with screws to timber frame work complete all as specified and directed. |
| 63 | M&L in repairs for 12mm thick block boards grade 2 quality, interior grade decorative type with decorative face veneer on one face, fixed with screws to timber frame work complete all as specified and directed |
| 64 | M&L for preparing new or previously untreated wooden surfaces of any description over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 65 | S&F of solid PVC door frame of size 50mm x47mm made out of 5mm plain colour PVC sheet reinforced with 19mmx19mm MS square tube.EPDM rubber gasket weather seal to be provided throughout the frame.The profile shall be mitre cut at two corners and joined by inserting 2mm of 150mm long brackets of 15x15mm MS square tube inside the 19mmx19mm MS square tube and suitably screwed.The door frame shall be fixed to the wall using 65x100mm long sodium plated screws through the frame by using PVC fasteners.A minimum of 06 Nos screws to be provided for each frame supplying & fixing in opening complete all as per specified and directed Note:Cutting holes, providing cement concrete for holdfast finishing all disturbed surfaces (CM 1:4) around door frame etc are deemed in this item |
| 66 | S&F of factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MS tubes for Top & bottom rails.MS frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for styles and plain colour PVC sheets for top rail, lack rail & bottom rail on either side & as far insert for top rail & bottom rail ; panelling of plain colour PVC sheet to be fitted in the MS frame welded/sealed to the stiles & rails with suitable PVC sheet beating and joined together with solvent cement supplied and fixing in the frame at site including all fixture and fittings etc complete all as specified and directed. |
| 67 | S&F in repairs of 100 mm stainless steel hinges of any colour all as specified and directed |
| 68 | S&F in repairs of 75 mm stainless steel hinges of any colour all as specified and directed |
| 69 | S&F of aluminium handle 150mm cast type anodised all and specified and directed |
| 70 | S&F of aluminium anodised, barrel tower bolt 200mm of extruded section all as specified and directed |
| 71 | S&F of aluminium alloy anodised, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets , cast or extracted section and fixing bolt and sliding bolts of extracted section complete all as specified and directed |
| 72 | S&F of floor door stopper of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed in floor 150 mm size of cover plate complete all as specified and directed. |
| 73 | S&F of butt hinges, medium weight, cold rolled, mild steel 100mm long (ISI marked), complete all as specified and directed. |
| 74 | S&F in repairs of stainless steel barrel tower bolt 150mm of extruded section all as specified and directed. |
| 75 | S&F in repairs of stainless steel barrel tower bolt 200mm of extruded section all as specified and directed |
| 76 | S&F in repairs of stainless steel handle 150mm all as specified and directed |
| 77 | S&F in repairs of stainless steel handle 100mm all as specified and directed |
| 78 | S&F in repair of 150mm floor door stopper of stainless steel body, fixed in floor all as specified and directed |
| 79 | S&F in repairs of stainless steel, sliding door bolt 250 mm long with hasp, staple (bolt type) and fixing clips of sheets complete all as specified and directed. |
| 80 | S&F of stainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40mm and fixed with stainless steel wire staples complete all as specified and directed |
| 81 | Hacking out old broken glass (any thickness, size, quality or description) from wooden frames or stone concrete glazed with oil putty or fixed with beeds all as specified and directed |
| 82 | S&F of sheet glass ordinary quality 4mm thick and glazing with oil putty in square n.exc 0.50 Sqm in each pane complete all as specified and directed |
| 83 | All as per item 81 above but figured glass pin head type. |
| 84 | S&F in repairs of sheet glass ordinary quality 4.8mm thick as in doors, showcase alum frame work & similar work with or without glass roller area exc 0.50 Sqm including neoprene gasket complete all as specified and directed. |
| 85 | S&F in repairs of mild steel Mortice lock, vertical type, size100 mm four lever all as specified and directed |
| 86 | S&F in repairs of ISI marked Aluminium Die cast hydraulically regulated door closer designation no.03 universal type, suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg width upto 1.50 mm mtr and weight between 61 to 80 kg complete all as specified and directed |
| 87 | S&F in repairs of double action floor spring hydraulically regulated made up of minimum 1.25 mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and directed |
| 88 | M&L for Easing of wooden window shutters/CB shutters (One unit shall be comprising of one window/ CB/ Showcase/ irrespective of number of leaves) for properly closing/ opening tightening of hinges or changing the position of hinges adjustment of tower bolts sliding bolt etc complete all as specified and directed |
| 89 | All as per item No 87 above but door shutter |
| 90 | Taking down cement plaster in patches on brick work, racking out joints, hacking for key scrubbing down with water etc complete and removing the soil to a distance of n.exc 100m and depositing where directed all as specified and M&L for 15mm thick cement plaster in CM (1:4) on brick work/concrete surface finished even & smooth without using extra cement. the area of patches should not be more than 1.00Sqm all as specified and directed. |
| 91 | M&L for repairing of 40mm thick flooring in patches with PCC 1:2:4 (using 20mm graded stone aggregate) and finished even & smooth without using extra cement. The area of patches should not be more than 2.00 sqm each. The rates include demolition of existing concrete complete all as specified and directed |
| 92 | S&F in repairs of 300 mm ordinary rat rail rod pattern springs including roller and roller plate complete all as specified and directed |
| 93 | M&L for repair/easing of steel window shutter for properly closing/opening tightening of hinges by oiling, greasing or by replacing of new box type hinges including necessary cutting & welding complete all as specified and directed Note:- One unit shall be comprising of twowindow Shutter up to 12m height. |
| 94 | Demolition of brick work built in cement mortar or cement lime mortar complete all as directed. |
| 95 | Taking down cement plaster from walls of any description all as specified and directed. |
| 96 | M&L for brick work with sub class \"B\" bricks, straight of curved on plan exc 6M mean radius built in CM 1:6 complete all as specified and directed |
| 97 | M&L for 15 mm thick cement plaster in CM (1:6) including finished even and smooth (without using extra lime or cement) complete all as specified and directed. |
| 98 | M&L for 10mm thick cement plaster in CM 1:6 on brick work or concrete surfaces rendering is to be even & smooth without using extra cement on internal walls complete all as specified and directed |
| 99 | M&L for applying two coats of distemper (OBD) over a coat of primer including preparation to the new surfaces of wall complete all as specified and directed |
| 100 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint on walls including priming surfaces with alkali resistant priming paint etc complete all as specified and directed |
| 101 | M&L for running welding in repairs on metal to be welded of thickness exc. 6mm but n.exc 9mm including preparation of surface, etc complete all as specified and directed |
| 102 | S&F in repairs of CP Towel rail20mm dia including fittings of necessary screws etc complete all as specified and directed |
| 103 | S&F in repairs of CP Towel ring including fittings of necessary screws etc. complete all as specified and directed |
| 104 | S&F in repairs of Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket gland and railing 60cm lay including necessary holding arrangements with screws etc all as specified and directed |
| 105 | Taking up or down 20mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed |
| 106 | Taking up or down 25mm bore steel tubing and connections including cleaning for re-fixing or removal to store complete all as specified and directed |
| 107 | S&F of CPVC pipes 20 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying including fitting in floors complete all as specified and directed |
| 108 | S&F of CPVC pipes 25 mm SDR 11 & Plain CPVC SDR 11 on walls, ceiling or laying including fitting in floors complete all as specified and directed |
| 109 | S&F in repairs of vitreous china under counter sunk modular wash basin white flat back size 190X550X430mm including fixing of 32mm low density polyethylene pipes (LDPE) of pressure rating 6kg/cm2, coupling complete all as specified and directed |
| 110 | S&F in repair of PVC syphon kit for low level flushing cistern all as specified and directed |
| 111 | S&Fin repair of PVC Cabinet mirror all as specified and directed. |
| 112 | S&F in repairs of Basin mixer 15 mm dia Fancy type all as specified and directed. |
| 113 | S&F in repairs of 15mm dia swan neck CP pillar cock all as specified and directed. |
| 114 | S&F in repair of 15mm dia chromium plate fancy type stop valve concealed type with long shank and cup complete all as specified and directed |
| 115 | M&L for preparation of new steel surface of any description, not otherwise described, over 10cm width or girth, and applying two coats of synthetic enamel paint over a coat of red oxide complete all as specified and directed. |
| 116 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles and rubbish off the premises etc complete all as specified and directed. |
| 117 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and complete 15mm thick screed bed in CM 1:4 over and including 25mm thick PCC 1:2:4 type B0 (using 12.50mm graded crushed stone aggregate) complete all as specified and directed. |
| 118 | M&L for screed bed or bedding layer of mortar 20 mm thick for laying floor tiles in cement mortar 1:6 finished even and rough complete all as specified and directed. |
| 119 | M&L for 20mm thickness Granite (of any size) work in cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade complete all as specified and directed. |
| 120 | M&L for non-skid coloured ceramic tiles 7 to 8 mm thick matt finish (square/ rectangular) area of each tile exceeding 0.06 sqm but not exceeding 0.11 sqm, in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match with tile including screed bed 15 mm thick in CM (1:6) complete all as specified and directed |
| 121 | M&L for glazed coloured ceramic tiles of size 450X300X7 to 8mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match as in skirting/dado over 10 mm thick plaster in CM 1:4 finished complete all as specified and directed |
| 122 | M&L for repair ofaluminium doors including taking out door shutters and changing of certain parts if required like pilots, hinges, rubber beadings etc as required and re-fixing in same position and size of doors n.exc 2 sqm each complete all as specified and directed |
| 123 | All as per item no 121 but for windows complete all as specified and directed |
| 124 | S&F in repair of vitreous chinaurinals, bowl type of size 465x355x265mm white (minimum) with grating and union for discharge pipe (excluding flushing cistern and waste pipe),complete including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2 securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement,brackets, flush pipe, waste pipe grating and union for discharge pipe complete all as specified and directed |
| 125 | S&F in repairs of single piece EWC with cistern, soft close seat cover and twin flushingfittings of size wash down water closet (pedestal pattern) of any colour including fixing of bolts complete all as specified and directed |
| 126 | S&F in repairs of PTMT Waste coupling 40mm dia Waste coupling of PTMT (half or full threaded)(Minimum weight 32mm-45gms/40mm-60 gms)all as specified and directed. |
| 127 | S&F in repairs of brass Waste coupling for sink of 125mm long complete all as specified and directed |
