Construction Of Bus Stand For School Bus In Front Of Dattaawadi And Panvelkar Park At Ward No 42 In Kbmc , Part A - Civil Work , Excavation For Foundation In Earth, Soil Of All Types, Sand, Gravel And Soft Murum, Including Removing The Excavated Material Up To A Distance Of 50 M. Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting Etc. Complete. (Lift Upto 1.5 M.) , Excavation For Foundation In Hard Murum Including Removing The Excavated Material Upto A Distance Of 50 Metres Beyond The Building Area And Stacking And Spreading As Directed, Dewatering, Preparing The Bed For The Foundation And Necessary Back Filling, Ramming, Watering Including Shoring And Strutting Etc. Complete. (Lift From 1.5 To 3.0M.) , Filling In Plinth And Floors With Contractors Material/Brought From Outside And Approved By Engineer Incharge In Layers Of 15 Cm To 20 Cm Including Watering And Compaction Etc. Complete. , Providing Dry/ Trap/ Granite/ Quartzite/ Gneiss Rubble Stone Soling 15 Cm To 20 Cm Thick Including Hand Packing And Compacting Etc. Complete. , Providing And Laying Cast In Situ/Ready Mix Cement Concrete In M15 Of Trap/ Granite/Quartzite/Gneiss Metal For Bed Blocks, Foundation Blocks And Such Other Items Including Bailing Out Water, Plywood/Steel Formwork, Laying/ Pumping, Compacting, Roughening Them If Special Finish Is To Be Provided, Finishing Uneven And Honeycombed Surface And Curing Etc. Complete. The Cement Mortar 1:3 Plaster Is Considered For Rendering Uneven And Honeycombed Surface Only. Newly Laid Concrete Shall Be Covered By Gunny Bag, Plastic, Tarpaulin Etc. (Wooden Centering Will Not Be Allowed.), With Fully Automatic Micro Processor Based Plc With Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Natural Sand/V.S.I. Quality Artificial Sand , Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-25 Of Trap / Granite/Quartzite/ Gneiss Metal For R.C.C. Work In Foundations Like Raft, Strip Foundations, Grillage And Footings Of R.C.C. Columns And Steel Stanchions Etc. Including Bailing Out Water, Steel Centering, Formwork ,Cover Blocks, Laying/Pumping, Compaction And Curing Roughening The Surface If Special Finish Is To Be Provided (Excluding Reinforcement And Structural Steel) Etc. Complete, With Fully Automatic Micro Processor Based Plc Without Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate (Crushed Sand Vsi Grade) , Providing And Laying Cast In Situ/Ready Mix Cement Concrete M-25 Of Trap / Granite /Quartzite/ Gneiss Metal For R.C.C. Columns As Per Detailed Designs And Drawings Or As Directed Including Steel Centering, Formwork, Cover Blocks, Laying/Pumping, Compaction Finishing The Formed Surfaces With Cement Mortar 1:3 Of Sufficient Minimum Thickness To Give A Smooth And Even Surface Or Roughening If Special Finish Is To Be Provided And Curing Etc. Complete,(Excluding Reinforcement And Structural Steel).With Fully Automatic Micro Processor Based Plc Without Scada Enabled Reversible Drum Type Mixer/ Concrete Batch Mix Plant (Pan Mixer) Etc. Complete. With Fine Aggregate (Crushed Sand Vsi Grade) , Providing Sand Faced Plaster Externally In Cement Mortar Using Approved Screened Sand, In All Positions Including Base Coat Of 15 Mm Thick In Cement Mortar 1:4 Using Waterproofing Compound At 1 Kg Per Cement Bag Curing The Same For Not Less Than 2 Days And Keeping The Surface Of The Base Coat Rough To Receive The Sand Faced Treatment 6 To 8 Mm Thick In Cement Mortar 1:4 Finishing The Surface By Taking Out Grains And Curing For Fourteen Days Scaffolding Etc.Complete. , Providing And Fixing In Position Tmt - Fe - 500 Bar Reinforcement Of Various Diameters For R.C.C. Pile Caps, Footings, Foundations, Slabs, Beams Columns, Canopies, Staircase, Newels, Chajjas, Lintels Pardis, Copings, Fins, Arches Etc. As Per Detailed Designs, Drawings And Schedules. Including Cutting, Bending, Hooking The Bars, Binding With Wires Or Tack Welding And Supporting As Required Complete. , Providing And Laying Chequered Tiles Of Approved Quality Of Size 30 Cm X 30 Cm, Confirming To Corresponding I.S. For Flooring In Required Position Laid On A Bed Of 1:4 Cement Mortar Including Cement Float, Filling Joint With Cement Slurry Cleaning Curing Etc. Complete. , Providing Structural Steel Work Of Rectangular Hollow Steel Section For Steel Trusses, Other Similar Trussed Items Like Purlin And Members With All Bracing, Gusset Plates Etc. As Per Detailed Designs And Drawings Or As Directed Including Cutting, Fabricating, Hoisting, Erecting, Fixing In Position Making Riveted/Bolted/ Welded Connections And One Coat Of Anticorrosive Paint And Over It Two Coats Of Oil Painting Of Approved Quality And Shade Complete. , Providing And Applying Priming Coat On Concrete/ Masonary/ Asbestos Cement Plastered Surfaces Including Scaffolding If Necessary, Preparing The Surface By Thoroughly Cleaning Oil, Grease, Dirt And Other Foreign Matter And Sand Papering As Required Etc. Complete. , Providing And Applying Plastic Emulsion Paint Of Approved Quality, Colour And Shade To New Surface In Three Coats Including Scaffolding, Preparing The Surface. (Excluding Primer Coat) Etc. Complete. , Providing And Fixing 900Mmhigh S.S.304Grade Stainless Steel Railingwith 40Mm Diameterand 1.5Mm Thick At Top,40Mmdiameter And 1.5Mmthick Vertical Supports Spaced At 1.5Mcenter To Center And 8Mm Thick Toughened Glass Including Fabricating ,Fixtures, Errecting , Necessarywelding , Grinding , Finishing, Buffing To Stainless Steel Pipe Etc. Complet , Polycarbonate 16Mm , Providing And Fixing Aluminium Grill Diamond Mesh Type Dg202 Of 7.5Mm Thick Includingfixing In Position Anodised Aluminium Frame Section Of 80 X 38Mmx 1.22 Mmsize Box, Cutting To The Required Size With All Wastage , Labour, Lead Lift Etc. Complete. , Providing And Fixing Sign Boards Of Size Size 60 X 80 Cm Made Out Of 14 Gauge M.S.Sheet With Retro Reflective Sheeting Of Engineering Grade As Per M.O.T. Specification Number 8013(1993) White Reflective Back Ground, Lettering Symbol Bordering Of Black Non Reflective Paint Including 3.65 Metre Long M.S.Angle One Post Of 65 X 65 X 6 Mm Size Duly Painted With White And Black Bands Including Fixing The Boards Of M.S. Angle With Galvanised Nuts And Bolts And Washer. The Board Shall Be As Per Irc-67-1977 Including Conveying Fixing In Ground With C.C. 1:4:8 Block Of Size 0.60 X 0.60 X 0.75 M, With 7 Year Guarantee For The Sheeting Etc. Complete.Mild Steel Board With Engineering Grade. , Public Seating Chair. - 3 Seater Providing And Fixing 3 Seater Public Seating Chair Made Of Complete Metal With Legs In Crome Finish And Seates In Silver Powder Coating Finish. , Royalty , Testing Charges , Add 18% G.S.T. (S.G.S.T. 9% + C.G.S.T. 9%) , Add (1 % Insurance)
