|
| 1 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : |
| 2 | Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 3 | Providing and fixing fly proof galvanized M.S. wire gauge to windows and clerestory windows using wire gauge with average width of aperture 1.4 mm in both directions with wire of dia 0.63 mm all complete. |
| 4 | With second class teak wood beading 62X19 mm |
| 5 | Providing and fixing oxidised M.S. casement stays (straight peg type) with necessary screws etc. complete (Copper oxidised as per IS 1378) |
| 6 | 250 mm weighing not less than 280 grams |
| 7 | 12 mm cement plaster of mix : |
| 8 | 1:6 (1 cement: 6 coarse sand) |
| 9 | 15 mm cement plaster on rough side of single or half brick wall of mix : |
| 10 | 1:6 (1 cement: 6 coarse sand) |
| 11 | Painting (one or more coats) on rain water, soil, waste and vent pipes and fittings with synthetic enamel paint of approved brand and manufacture and required colour on old work : |
| 12 | 75 mm diameter pipes . |
| 13 | 100 mm diameter pipes . |
| 14 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : |
| 15 | One or more coats on old work. |
| 16 | Finishing walls with Acrylic Smooth exterior paint of required shade : |
| 17 | Old work (Two or more coat applied @ 1.67 ltr/ 10 sqm) on existing cement paint surface). |
| 18 | Repairs to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sq.meters and under, including cutting the patch in proper shape, raking out joints and preparing and plastering the surface of the walls complete, including disposal of rubbish to the dumping ground, all complete as per direction of Engineer-in-harge. |
| 19 | With cement mortar 1:4 (1 cement : 4 fine sand). |
| 20 | Raking out joints in lime or cement mortar and preparing the surface for re-pointing or replastering including disposal of rubbish to the dumping ground, all complete as per directions of Engineer-In-Charge. |
| 21 | Flush pointing with cement mortar 1:3 (1 cement : 3 fine sand) mixed with 2% of integral water proofing compound by weight of cement for flat tile bricks on top of mud phaska : |
| 22 | With F.P.S. brick tiles |
| 23 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. : Internal work - Exposed on wall |
| 24 | 20 mm nominal outer dia. Pipes. |
| 25 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. : External work |
| 26 | 15 mm dia. nominal bore |
| 27 | 20 mm dia. nominal bore |
| 28 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : |
| 29 | 25 mm nominal bore |
| 30 | 20 mm nominal bore |
| 31 | Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : |
| 32 | 20 mm nominal bore |
| 33 | Providing and fixing uplasticised PVC connection pipe with brass unions : |
| 34 | 30 cm length |
| 35 | 15 mm nominal bore |
| 36 | Providing and fixing C.P. brass shower rose with 15 or 20 mm inlet : |
| 37 | 150 mm diameter |
| 38 | Repainting G.I. pipes and fittings with synthetic enamel white paint with one coat of approved quality : |
| 39 | 15 mm diameter pipe. |
| 40 | 20 mm diameter pipe. |
| 41 | 25 mm diameter pipe |
| 42 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) |
| 43 | 20 mm nominal bore |
| 44 | 25 mm nominal bore |
| 45 | Providing and placing on terrace (at all floor levels) polyethylene water storage tank, IS : 12701 marked, with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tank. |
