Tender For Electrical Works For Modernising Csc In Cto, Trivandrum; 1 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit/suitable size casing caping, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required. 2 Group C 3 Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit/suitable size casing caping as required 4 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 5 4 X 1.5 sq. mm + 2 X 1.5 sq. mm earth wire 6 2 X 4 sq. mm + 1 X 4 sq. mm earth wire 7 Supplying and fixing of following sizes ofPVC mini trunkingalong with accessories in surface including making necessary hole and making good the same as required. (Make:- Legrand or similar superior make) 8 32 mm x 12.5 mm 9 32 mm x 20 mm 10 Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required. 11 5/6 amps switch 12 15/16 amp switch 13 3 pin 5/6 amp socket outlet 14 CAT 6 RJ 45computer jack 15 Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required. 16 1 or 2 Module (75mmX75mm) 17 3 Module (100mmX75mm) 18 Suppying and fixing 3 mm nominal thick phenolic laminated sheetas reqd. 19 Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. (For light plugs to be used in non residential buildings). 20 Supplying, Installation, testing and commissioning of pre-wired, following LED fitting including lamp/driver etc, complete with all accessories etc. directly on ceiling/ wall, including connection with 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable and earthing etc. as required. 21 Surface/suspended type 4 Ft LED Integrated batten fitting with fire retardent extruded Plastic with maximum power input of 20 W and with Lumens output not less than 2000 Lumens, 6500K. (Wipro, Crompton, Philips, Havells or Similar) 22 Dismantling of ceiling fan and painting the same with one or more coats of spray painting with synthetic enamel paint of approved brand and manufacture to give an even shade, including cleaning of surface with detergent and replacing the damaged rubber reel, nuts and bolts with washers and safety pins, reinstalling the same as required. 23 Supplying and fixing 5 A to 32 A rating, 240/415 V, 10 kA, “C” curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required. 24 Single pole 25 Supplying and fixing following rating, four pole, 415 volts, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required. 26 40 amps 27 Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. 28 Supplying and fixing following way, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) 29 8 way, Double door 30 Supply, Installation, testing and comissioning of 400 mm sweep wall fan with metal leaf, built in speed regulator and oscillation gear i/c connection, testing commissioning etc as required (M/s Crompton/Almonard/Usha or similar superior make) 31 Dismantling of the following Electrical Items from their existing position, with out any damage including disconnecting of all electrical connections, earth connections and shifting and stalkng it at a conveinent location in the same building/adjacent building in same compound, as directed by Engineer-in-Charge etc as required 32 Old light fitting of various types including 4ft, 2ft, Batten type, mirror optic, recess / surface type etc 33 Servicing / Maintenance of the existing Wall Fan of various makes for making them in good working condition including cleaning , Oiling / greasing checking and correcting of oscilation gear etc as required. 34 Servicing / Maintenance of the existing Air Circulator Fans of various makes for making them in good working condition including cleaning , Oiling / greasing checking and correcting of oscilation gear etc as required. 35 Supplying, laying and fixing of one numberPVC insulated and PVC sheathed/ XLPE Copper control cable of 1.1KV grade of 4 C 1.5 sq.mm in following ways including all necessary accessories as required. 36 on wall surface (clamped with 1mm thick saddle) 37 Supplying and making end termination with brass compression gland and copper lugs for following size of PVC insulated and PVC sheathed / XLPE Copper conductor cable of 1.1 KV grade as required. 38 4 x 1.5 Sqmm 39 Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. 40 Supply and fixing of weatherproof box made of SMC enclosure of Appro: size 160 X 160 X 60 mm withlocking arrangement on the existing lamp post/wall including supplying and fixing 1 No 6 ADP MCB10 KA rating andP&N porcelain/ backliteconnector with necessary fixing arrangements in the SMC box, etc as required. (SMC box make: M/sSintex or SS)
