Tender For Electrification Work Of 7Abadi Plot In Village Dhanauri,Yea. Wc-Em-02 - LT Network Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. YEIDA SOR-24410 SP-36, 9.5mtr. (Approx. wt. 142kg.) 2 Supply & erection of Steel tubular pole with 1/6 over all length of pole grouted with cement concrete in 1:3:6 (1 cement : 3 coarse sand : 6 stone ballast) including plinthing of pole 30 cm above the ground level, plastering of plinth including excavation back filling etc. The rates includes all materials labour & T&P. etc. required for proper completion of work as per direction of E/I. YEIDA SOR-24410 SP-62, 12mtr. (Approx. wt. 264kg.) 3 Supply & fixing of MS rod for earthing with 2.5 m long, solid, 20 mm dia hot dipped galvanised MS rod buried till the top reaches 1.7 mts. Below the GL complete with bolts & nuts & GI earth wire 7/14. Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-52 4 S/F of 11KV Polymeric Disc with Gun fittings on cross arms/clamps fixed on poles including all Nut, bolts & washer etc. (Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-79 5 S/F of 11 KV Polymeric pin insulator with pin on poles or anywhere specified including bolts to fasten on pole cap/cross arm with the poles.(Jaishree, BHEL,RR, Hindustan, Yamuna, AD, make) Complete in all respect, as directed by Engineer in charge. YEIDA SOR-78 6 Supply & Erection of End Clamp (J Hook) Complete in all respect, as directed by Engineer in charge.Analysis of Rates 7 Supply & erection of screw tightener complete in all respect, as directed by Engineer in charge. YEIDA SOR-37 8 Supply & fixing of stay insulator with stay wire complete in all respect, as directed by Engineer in charge. YEIDA SOR-38 9 Supply, delivery, testing, laying of Al. conductor XLPE insulated 1100V grade Arial Bunched Cable with Messenger wire as below on pole complete in all respect. (CCI, Gloster, Asian, Universal, NICCO, ICL, Diamond, Havells, Kalinga, Suraj, Delton Grandley & Polycab, make) Complete in all respect, as directed by Engineer in charge. As per the directions of the Engineer-in-charge. YEIDA SOR-76 3CX95 Sqmm. + 1CX50 Sqmm.+ 70 Sqmm. massanger 10 Supply & laying of Aluminium condutor, XPLE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surgace the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, completed in all respect. The armouring of the cabel shall be properly connected with the earth conductor by clamps etc. (CCI (Bombay/Nasik), Fort Gloster (Calcutta/Baripara), Asian (Thane/Silvasa), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make & for small works upto value of cable for Rs. 25.00 Lacs Klinga, Suraj, Delton, Grandley & Polycab make can be used) as per the directions of the Engineer-in-charge UPPWD/2018 PS-501 3.5Cx70 sqmm. 11 S/L of 120mm dia. DWC pipe for drawing of power cable across the road by drilling of 150mm dia. at 1mtr. Below the road level the work should be done by manual Trenchless method. Complete in all respect per direction of Engineer-in-charge. YEIDA SOR-13 12 Supply & fixing of Suspension clamp with insulated suitable ABC arial bunched conductor complete in all respect, as directed by Engineer in charge. Analysis of Rates 13 Supply & fixing of L.T. Junction box on pole suitable for out door type operation of size 388x304x170 mm made of 3.0mm CRCA sheet complete in all respect, as directed by Engineer in charge. Analysis of Rates 14 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. UPPWD/2018 PS-504 50 Sqmm. 15 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. UPPWD/2018 PS-504 70 Sqmm. 16 S/F of palm or pin type copper tin plated cable socket (Lug) to the cable leads, insulating with tape & making connections etc. complete in all respects as per the directions of the Engineer-in-charge. UPPWD/2018 PS-504 95 Sqmm. 17 S/E of stay set at least 3.5 mtr away from the pole complete with galvanized 19mm dia x 1.800 mtr long stay rod. 30cmx30cmx6.3mm anchor plate thimble stay clamps, stay insulator 19mmx600mm double screw tightener. 7/4.00 mm G.I. stay wire etc. in1:3:6 cement concrete in all respect. UPPWD/2018 PS-630. 18 Painting of the electric pole with two coat of Al-paint over red oxide primer complete in all respect. UPPWD/2018 PS-634 19 Numbring of Pols with comination of yellow and black colour paint etc. Complete in all respects as per direction of E/I at site. 20 Street Light Supply and fixing ofLED Street light Fittinghaving die cast aluminium body and diffuser with driver set suitable for 52 to 72 Watt. Confirming to IP 66 Protection complete in all respect as per the directions of the Engineer-in-charge.(Make Philips, Crompton, Bajaj,)UPPWD-2018 P.S.-1422 cat-AAA 21 S/F of 40mm. dia 1.5mtr. Long G.I. pipe ‘B’ Class bracket with 2 Nos. ‘D’ clamps 50X6mm. flat iron on steel tubular pole / PCC pole with bolts, nuts etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-35 22 S/E of ‘D’ clamps 50X6mm. flat iron on steel tubular pole / steel rail pole with bolts, nuts etc complete in all respect including with aluminium paint. UPPWD/2018 PS-623 23 Supply & Fixing of XLPE insulated, Copper un-armoured Control cable 1100V grade etc. Complete in all respects as per direction of the Engineer-in-charge. make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI. YEIDA SOR-13CX1.5 Sqmm. 24 S/F of 95Sqm to 16Sqm L.T ABC Connector on Pole complete in all respect, as directed by Engineer in charge. YEIDA SOR-36 25 S&F 100 Amp. 415V metal clad TP HRC type switch fuse unit complete with HRC fuse on angle iron bracket complete in all respects.UPPWD-2018 P.S.-324 26 HT Network Supply, delivery, laying, testing & commissioning of 11KV (E) XLPE cable having compact circular stranded aluminium conductor the conductor should have screening of extruded semi conducting compound, cross linked polythylene (XLPE), insulation screening of the extruded semi conducting compound followed by copper tape, cores laid up, taped PVC inner sheath, single layer of steel strip armouring, overall PVC outer sheath conforming to IS: 7098 (Part-amendments) for following mentioned sizes. It should be operational at 11 KV, 50 Hz. AC system in ground at a depth of 1200 mm below ground level over a cushion of 75 mm thick sand all-round and protected with bricks on sides and at the top surface. The cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I. with Complete in all respect. The price are inclusive of all earth work such as digging, back filling, supply & spreading of good earth all around the cable, supply & providing cable identification markers. The installation should be complete in all respect and as per requirement of the job under the direction of Engineer-in-charge.Make- CCI, Gloster, Asian, Universal, Nicco, ICL, Diamond, Havells & KEI. YEIDA SOR-2 3CX300 Sqmm. 27 Supply, Installation, Testing & Commissioning of 11 KV Out door type cable termination kit of 3 core cable with cable termination at the panel & transformer complete in all respect as required for proper completion of work as per direction of Engineer-in-charge. (Make Raychem/C.C.I./Frontec). YEIDA SOR-53CX300Sq.mm. 28 Supply, Installation, Testing & Commissioning of 11KV, indoor type cable termination kit of 3 core cable with cable termination at the panel & transformer complete in all respect as required for proper completion of work as per direction of Engineer-in-charge. (Make- Raychem/C.C.I./Frontec). YEIDA SOR-4 29 Supply, Installation, Testing & Commissioning of 11 KV Straight through cable jointing kit of 3 core cable with cable jointing. Complete in all respect as required for proper completion of work as per direction of Engineer-in-charge. (Make Raychem/C.C.I./ Frontec). YEIDA SOR-63CX300Sq.mm. 30 S/F of G.I Pipe 150MM dia B class Zindal/tata make including required material T&P etc. Complete in all respect, as directed by Engineer in charge. As per the directions of the Engineer-in-charge. YEIDA SOR-65 31 S/L of 160mm dia. H.D.P.E pipe for drawing of power cable across the road by drilling of 200mm dia. at 1mtr. Below the road level thereby doing the work of providing H.D.P.E pipe by Trenchless method PE-63/PN-6 .as per the directions of the Engineer-in-charge. YEIDA SOR-81 32 Supply, delivery, assembly, installation, testing and commissioning of Outdoor type distribution transformer. 11/0.433 KV, 3 Phase, Double wound winding. Voltage ratio 11000/433-250 Volts, vector group Dyn 11. Air cooled with manually operated +5% and +10% off load Tap changer and complete with standard fitting & accessories as given in the specification and also confirming tolatest IS amendments : 1180 (LEVEL-1)with first filling of the oil complete as required. (This includes oil testing for dielectric strength, flash over test and filtration of transformer oil to be conducted in the event of unsatisfactory results of oil testing. (Kanohar Electrical, Vijay Electrical, Voltamp, Diamond, NGEF, Crompton, Alstom, BHEL, Raychem, make). YEIDA SOR-83 250 KVA Copper wound 33 Supply, delivery, assembly, installation, testing and commissioning of Outdoor type distribution transformer. 11/0.433 KV, 3 Phase, Double wound winding. Voltage ratio 11000/433-250 Volts, vector group Dyn 11. Air cooled with manually operated +5% and +10% off load Tap changer and complete with standard fitting & accessories as given in the specification and also confirming tolatest IS amendments : 1180 (LEVEL-1)with first filling of the oil complete as required. (This includes oil testing for dielectric strength, flash over test and filtration of transformer oil to be conducted in the event of unsatisfactory results of oil testing. (Kanohar Electrical, Vijay Electrical, Voltamp, Diamond, NGEF, Crompton, Alstom, BHEL, Raychem, make). YEIDA SOR-82 400 KVA Copper wound 34 S/F of cross arm made of 100X50X6 mm M.S. channel 2.5 mtr. long on poles with packing, piece, M.S. clamp, Nut bolts etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-30 35 Supply and burying of 600mmX600mmX6.0mm GI plate, vertically for earthing with its top atleast 3 mtr. Below ground level complete with 20mm dia GI pipe & funnel for watering and one earthing lead of one no.8 to 10 SWG GI wire in15mm dia G.I pipe and G.I wire up toswitch board ( from approm to switch board the cost of G.I pipe and G.I wire will be Extra) 30cm suuare C.l frame with hinged cover masonry housing alternate layers ofcharcoal/coke & salt atleast 150 mm thick all-around etc. as per direction of Engineer-incharge complete in all respects as per drawing (this will apply for earthing of poles also). UPPWD/2018 PS-702 36 S/L of 32mmX6mm GIstrip from earth electrode directly in the ground as required complete in all respect. UPPWD/2018 PS-717 37 S/F of 11 KV TPMO set of ‘Relco’ make or equivalent with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge. YEIDA SOR-56 38 S/F of 11 KV Drop-out type fuse set channel type of ‘Relco’ or equivalent make with insulators and other accessories required for proper completion of work.as per the directions of the Engineer-in-charge. YEIDA SOR-57 39 Supply andfixing dangerboardfabricated from10gaugeM.S. Sheet as per I.E. Rules.UPPWD/2018 PS-1109 40 Supply & fixing of Cable route marker including Painting & Writing Complete in all respects as per direction of the Engineer-in-charge. YEIDA SOR-55. 41 Supply & laying of Aluminium condutor, XPLE insulated, armoured served, sheathed cable 1100 V grade at a depth of 750mm below ground level over a cushion of 75mm thick sand alround and protected with burnt bricks on sides and on top. On surgace the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the E/I, completed in all respect. The armouring of the cabel shall be properly connected with the earth conductor by clamps etc. (CCI (Bombay/Nasik), Fort Gloster (Calcutta/Baripara), Asian (Thane/Silvasa), Universal (Satna), Nicco (Calcutta), ICL (Rajpura), Diamond, Havells make & for small works upto value of cable for Rs. 25.00 Lacs Klinga, Suraj, Delton, Grandley & Polycab make can be used) as per the directions of the Engineer-in-charge UPPWD/2018 PS-501 2Cx16 sqmm. 42 Supply, Sagging, tensioning, jointing and bending of suitable size ACSR conductor conferming to I.S. specification including cost of aluminium wire and jointing sleeve required. The rates includes cost of material, labour, T&P etc. required for proper completion of work as per direction of E/I. UPPWD/2018 PS-627,Wesele conductor. 43 S/F of cross arm made of 100X50X6 mm M.S. channel 1.15 mtr. long with M.S. clamp packing piece Nut bolts etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-31 44 S/F of 0.3mtr. long top channel for pin made of 100X50X6 mm M.S. channel with M.S. clamp packing box nut bolt etc. complete in all respect, as directed by Engineer in charge. YEIDA SOR-32
