}

Tender For Drain Construction Work From Sarwans House To Lallus House In Barhi Village Panchayat - E/W In Excavation In Foundation Ordinory Soil With Single I/C 1.5Mtr Lift And Lead Upto 30Mtr And I/C Filling Watring And Ramming Of Excavated Earth Into , mardah-Uttar Pradesh

Rural Development has published Tender For Drain Construction Work From Sarwans House To Lallus House In Barhi Village Panchayat - E/W In Excavation In Foundation Ordinory Soil With Single I/C 1.5Mtr Lift And Lead Upto 30Mtr And I/C Filling Watring And Ramming Of Excavated Earth Into . Submission Date for this Tender is 16-05-2025. Drainage Tenders in mardah Uttar Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

48934558
Tender For Drain Construction Work From Sarwans House To Lallus House In Barhi Village Panchayat - E/W In Excavation In Foundation Ordinory Soil With Single I/C 1.5Mtr Lift And Lead Upto 30Mtr And I/C Filling Watring And Ramming Of Excavated Earth Into
Open Tender
NCB
Uttar Pradesh
Mardah
16-05-2025

Tender Documents

Tender Details

Tender For Drain Construction Work From Sarwans House To Lallus House In Barhi Village Panchayat - E/W in excavation in foundation ordinory soil with single i/c 1.5mtr lift and lead upto 30mtr and i/c filling watring and ramming of excavated earth into the space between the building and the side of foundation trenches or into plinth and removel and disposel of surplus earth as directed by the engineer incharge upto a distance of 30mtr from the foundation trenches asper S.I. No.251. 2 Concrete with 4cm gauge brick ballast Coarse sand of 2.25F.M and cement inproportion of 1:4:8 in foundation and under floor including supply of all materials labour T&Petc. required for proper completion of the work. S.I.No.275 3 M-150 B/W with 1:4 cement and F-sand morter in Foundationi/c all labaur material t&P as per S.I. No. 303 4 R.C.Cwork with cement approved coarse sand and 2cm. Gauge approved dalla grit proportion of 1:2:4in R.C.C Tie Beam S.I.No. 283 5 P.C.C1:2:4 Cement and C.Sand and 19mm Dalla grit bed block andHold fast. SI.No. 279(b) 6 M-150 B/W with 1:4 cement and F-sand morter in super structurei/c all labaur material t&P as per S.I. No. 303, 309 and 310 7 R.C.C work withc ement approved coarse sand and 2cm. Gauge approved dalla grit proportion of1:2:4 in R.C.C Tiebeam SI.No. 283 8 providing and fixing of box type fan hooks (minimum 10cm dia) with and including fixing of 12mm dia plain bar in position as per SI No. NS 4 of chapeter 12 9 Mild steel iron in plain work such as in reinforced concrete or rein force brick work wrought to requird shape as necessary cutting. SI No. 504 10 12mm thick plaster on roughface of wall with cement mortar consising of 1 part cement and 4 part of approved fine sand. Sino. 584 & 596 11 Same as item no 12 above but in plain surface SI No. 584 12 Earth work in embankemnet in ordinary soil cutting and includign ramming dressing and leveling for widening of road for completion work as per SI no. 253 13 25mm thick 1:2:4 plain cement concret floor with cement coarse sand and 2.00cm dialla grite. SI No. 600 14 Mild steel iron in heavy work such as trusses built up gates record racks roof work gates etc. As per SI No. 503 15 Supply corrugater AC sheet roofing fixed with jor 24 B.W.G in position including supply of all material labour and T&P etc. 16 S/F 22 BWG ridges valleys and gutters for iron roofing ixing with jor U bolts 10mm dia with G.I. limer and bitumen washers complet including supply of all material labour and T&P etc. 17 Supply and fixing of flush doors commercial quality confirming to IS 2202 part 1 (1983) as per SI No. 470 == 35mm thick shuters D 18 32mm thick double leaf shutters WV 19 Approximate cost of oxidised iron fitting ISI marked only material chapeter 01 (SI No. 16)== (A) ISI marked oxidised iron Twoer bolt- 09mm dia 300mm long (D) 20 09mm dia 200mm long (W) 21 (B) ISI marked alluminium iron sliding bolt-= 16mm dia 300mm long (D) 22 (C) ISI marked Oxidised iron Door handle- 10mm dia 150mm long (D) 23 10mm dia 100mm long (W) 24 (D) MISL Fittings== ISI marked iron hinges 100mm long (D) 25 ISI marked iron hinges 75mm long (W) 26 Iron screws 25mm 27 Iron screws 30mm 28 Painting or varnishing new iron work in small areas or new wood with one coat. SI No. 641-642 29 One primign coat of cement primer and one coat dry distemper on new work inclduing supply of all material labour and T&P etc. As per SI No. 649 & 650 30 Finishing wall with water proof cement paint of approved make and quality on new work with two coat to give an even shade including supply of all materials labour and T&P etc. asper SI No. 660 & 661 31 S/F of signbaord and photography

Key Value

Document Fees
INR 677 /-
EMD
INR 19900.0 /-
Tender Value
INR 9.95 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail