Tender For Beautification Work Of Park Located In Mahmoorganj Shankarpuri. - Dismentaling sun dried brick work including stacking dismentaled maiterials as directed by engineer -in charge with a distance of 60 metersor 2020 it 691 2 cartage of blast, concar, col ,grite ,etc including loading unloadingbut excluding stacking on pucca roads 8 KM SDR 2020 IT 231A 3 sand filling IN plinth including supply of all neccerary quantity of sand from a distance note exceed it km from the site of work including water dressing etcSOR 2020 255 4 Excavation in foundation in ordinary soil (loamclay or sand) including lift up to 1.5m and lead up to 30m. And including filling watering and ramming of excavated earth into the space between the building and the sides of foundation trenches or into the plinth and removal and disposal of surplus earth ad directed by the Engineer in charge up to a distance of 30m from the foundation trenches including all T&P phowarah and basket etc. complete. [PWD SOR 2020 -251) 5 Concrete with 4 cm.gauge stone ballast, coarse sand and cement in the proportion of 8:4:1 including supply of all materials labour and tools and plants etc. required for proper completion for the work. [SOR 2020, SI No. 281] 6 M-150 brick work in 1:4 cement and coarse sand of 1.25 fineness modulous mortar in foundation and plinth including supply of all material, labour and tools and plants etc. required for proper completion of work. [PWD SOR 2020-305(b)] 7 12mm thick plaster with cement mortar consisting of 1 part cement and 4 part of coarse sand minimum thickness no be less than 10mm including supply of all materials, labour and T&P etc. required for proper completion of the work. [Based on SOR 2020, SI No. 584] 8 Steel work welded in built up sections/ framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required(DSR SI NO 10.25.2) 9 Grassing with selection No. 1 Doob grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed (the grass and good earth shall be paid for separately).In rows 5 cm apart in both directions DSR SI NO 2.10 hortocultur 2020 10 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.)DSR 2023 10.28 11 Removing paint or varnish with paint remover or with custic soda including supply of all material , labour tools and plants etc required for proper complition of work. (SOR 2020, SI No. 657) 12 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete.[DSR 2023, SI. No. 13.80] 13 Painting or varnishing new iron work in small areas or new wood with Two coat (up to one Sq.meter) of ready mixed priming paint and one coatof apporved superior quality ready mix paint (2nd quality synthetic enamel paint of apporved brand such as British paint, Shalimar, Asian or equivalent as appoved by E/I) or Varnish including supply of all materials, labour, T&P etc, required for proper completion of the work . Paint to be used should confirm the I.S.I. No. 103-1950. (SOR-2020, SI No. 641+642) 14 finishing wall with primium acrylic Smooth exterior paint with approved quality etc all work comp.New work (Two or more coats applied @ 1.43 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90litre/10 sqm)( DSR 2023 13.47.1 ) 15 Providing and layingof Rubbermoulded (GRY Color) Interlocking concrete block pavementshaving thickness 80mm including leveling and dressing of surface to required level & slope, spreading & moisting 30m thick local sand on bed, filling joints with local sand etc. for proper completion of the work as per drawings and Technical Specification attached. (SOR 2020 Pg-49 It no-1) 16 Street light 17 S&F of 63 Amp. 415 V metal clad T.P. reqireable type switch fuse unit on angle iron bracket complete in all respectCAB - BSOR 2018 SI No. 312 18 Wiring wire 1.5 sqmm 2 core.PSR at Rajghat Bridge file 19 S/B of pole earthing with 20mm die × 2000mm long M/S Rod connected with pole by 6 to 4 swg GI wire complete.As per UPPCL 20 S/F of 7 mtr. GI octagonal pole of approved make (top dia 70mm, bottom dia 130mm and base plate 12mm thick) having 3mm thickness with single arm bracket (1 mtr. Length) on RCC foundation including the cost of foundation, foundation bolts, excavation & back filling and required T&P complete in all respect.SOR 2018 SI No. 641 21 Supply and laying of aluminium conductor PVC insulated armoured served sheathed cables 1100 Volts grade at a depth of 750 mm below ground level over a cushion of 75 mm. thick sand all around and protected with burnt bricks on sides and on top. On surface the cable run shall be fixed on M.S. clamps etc. of suitable size or as directed by the Engineer-Incharge, complete in all respect. The armouring of the cable shall be properly connected with the earth conductor by clamps etc6sqmm × 3 coreSOR 2018 SI No. 501 (e) 22 Supply and fixing of LED Street light Fitting having die cast aluminium body and diffuser with driver set suitable for 75 to 90 Watt. Confirming to IP 66 and above Protection complete in all respectCAT - AASOR 2018 SI No. 1424 23 EPDM 24 Concrete with 4 cm. gauge stone ballast, coarse sand and cemnet in the proportion of 8:4:1 in foundation including supply of all material, labour and tools and plants. Etc. required for proper completion of work. [SOR 2020 S.I No.281] 25 Providing and laying 30 mm EPDM flooring (6 mm top layer of EPDM and 24 mm base layer of Buffering Rubber) PU binder for mixing Rubber Granules etc. all complete as per direction of E/I.
