|
| 1 | Supplying and fixing 50 W LED type Flood light fitting on surface of wall/existing support along with all accessories, fixing on the wall, connections etc as required (M/s Crompton Greaves or ss make) |
| 2 | Supplying of PVC insulated and sheathed armoured 2 core 1.5 sq.mm copper conductor 1.1 KV grade cable and laying the same on surface or in recess as reqd.(BSNL approved make) |
| 3 | Supplying and making end termination with brass compression gland for PVC insulated and sheathed copper conductor cable of 1.1 KV grade of size 2 core 1.5 sq.mm as reqd. |
| 4 | Supply & Fixing of suitable size SMC enclosure for compound light along with supplying and fixing 1 no 6A C-Curve SP MCB and 1 no 2 way connector suitable for operation on 230V, 1 Ph, 50Hz AC Supply,i/c interconnections, testing etc as reqd. (M/s Sintex enclosure or similar superior make) |
| 5 | Supplying and fixing 2 Way sheet steel MCB enclosure suitable for operation on 230V, 1 Ph AC Supply, on surface of wall etc as required |
| 6 | Supplying and fixing 5 -32 A rating, 240 V, 10 kA, \"C\" curve, DP MCB suitable for inductive load in the existing MCB DB complete with connections, testing and commissioning etc. as required |
| 7 | Supplying and fixing36 watt LED panel luminaires recessed type, 230V, 50Hz, including making all electrical connections with suitable size PVC insulated copper conductor wire etc. as required (M/s Havells or SS make) |
| 8 | Supply & Fixing of Analog Time Switch Suitable for operation on 230V, 1 Ph, 50Hz AC Supply, with NO & NC contacts for the operation of compound light along with 1 no 12A 2 Pole contactor / 20A DP MCB housed in a suitable SMC enclosure (approx size 250 x 250 x 160 )i/c interconnection, testing etc as reqd. (M/s GIC FM1 1Ph 1C/O, Sintex enclosure or similar superior make) |
| 9 | Supplying and fixing with angle/batten holder along with 9 watts LED lamp suitable for operation on 230 V, 1Ph supply etc. as required |
| 10 | Supplying of PVC insulated and sheathed armoured 2 core 10 sq.mm aluminium conductor 1.1 KV grade cable and laying the same on surface or in recess as reqd.(BSNL approved make) |
| 11 | Supplying and fixing of following module, PVC/GI enclosure on surface/recess along with PVCmodular base and cover plate etc as required (a) 6module |
| 12 | Supplying and fixing following accessories in the existing Modular enclosure including connections etc as required a) 6/10 A 1 way modular switch |
| 13 | b) 6 A modular Socket Outlet |
| 14 | General servicing & cleaning of 3.0 TR / 1.5 TR Air Conditioner (both indoor and outdoor) by removing all dirt and dust from the fins, and cleaning the fins/tubes with cleaning solution, combing the fins, Cleaning drainage i/c replacing the missing fasteners, lugs,connectors, ferrules, nuts and bolts, checking & tightening the connections, complete as required |
| 15 | Dismantling of 3.0 TR / 1.5 TR type AC unit from the existing position (both indoor and outdoor) with associated support, including pumping down the available refrigerent gas, disconnecting the electrical and mechanical connections, shifting the same from Shadipur TE to New TE etc complete as required |
| 16 | ITC of 3.0 TR / 1.5 TR Split AC unit i/c fixing of out door and indoor unit on the existing wall/angle iron frame, i/c connections with existing wires, leak testing, testing, commissioning etc complete as reqd |
| 17 | S/F of copper refrigerant line combined with 3/8\" & 5/8\" (nominal) including making thermal insulation with polifoam sheet of not less than 5 mm thick (nominal), supplying and laying 4 core 2.5 sqmm PVC insulated PVC sheathed copper conductor cable, connections etc as required (For 3.0 TR Ductable AC) |
| 18 | Supplying &Charging refrigerent in existing AC unit as per manufacturer recommendations complete as required |
| 19 | Providing support for 3.0 TR condenser unit with 40x40x6 mm (nominal) GI Angle including transportation, cutting, welding etc as required |
| 20 | Supplying and fixing 12V, 10A Static Battery charger for existing DG set including connections to battery with suitable capacity PVCinsulated copper conductor single core wire, providing crocodile clips etc as required |
| 21 | Supplying and fixing 600VA/360W Desktop UPS suitable for operation on 230V, 1 Ph AC supply with built-in 12V, 7Ah battery (for automatic sensor door) etc as required (M/s Frontech/APC or similar superior make) |
| 22 | Supplying and fixing air curtain of 1800mm width, suitable for operation on 230V, 1Ph AC Supply, on the existing wall/frame including minor civil works, connections with existing socket outlet etc as required (M/s Carrier FM-1218SA3/Y or similar superior make) |
| 23 | Supplying and fixing following components/accessories in the existing work station (a) 3in1 fast charging USB cable of about 1.25 mtr length |
| 24 | (b) Power bar 2000W, 10A with minimum 3 socket outlets suitable for operation on 230V, 1 Ph AC supply with built-in USB Ports- minimum 2 nos, LED indicator, On/Off switch as required |
| 25 | (c) 6.5 Inch Bluetooth Ceiling mounted speakers with built-in amplifier |
