|
| 1 | BED PLY TOP FD-246M&L For Replacement of the following existing old/broken/unserviceable parts of Ply Top with & including polishing complete to match with existing parts after finishing complete all as specified & directed and shown in drawings :-a) Top made out of ply wood BWR commercial 12 mm thick of size 1875 x 900 x 12mm Make :- Assam /Kit ply/Sharda/Greenply/century |
| 2 | b) Plywood BWR commercial 4 mm thick one side teak face of size 900mm x 275mm for foot side board complete.Make :- Assam /Kit ply/Sharda/Greenply/century |
| 3 | c) Plywood BWR commercial 4 mm thick one side teak face of size 900 x 450mm for head side board complete.Make :- Assam /Kit ply/Sharda/Greenply/century |
| 4 | d) Legs made out of Ist class hard wood (Shisham) of size 400 x 50 x 50mm. |
| 5 | e) Long rail made out Ist class hard wood (Shisham) of size 1980x60x50 mm free from knots/cracks. |
| 6 | (g) Removing unserviceable pvc rubber shoes of Bed ply top and supply and fixing ofhigh nylon buffersshall be provided to bottom of all legs |
| 7 | CHAIR EASY (FD-229)M&L for replacement of the following existing old/broken/unserviceable parts of chair easyfrom with & including new parts of Ist class hard wood (Shisham)made to shape as per drgs including polishing complete to match with existing parts after finishing complete all as specified & directed and shown on drgs.a) Front legs |
| 8 | b) Rear legs |
| 9 | c) Side rails |
| 10 | d) Arms |
| 11 | CHAIR WRITING (FD-280)M&L For Replacement of the following existing old/broken/unserviceable parts of chair writing from with & including new parts of Ist class hard wood (Shisham)made to shape as per drawings including polishing complete to match with existing parts after finishing complete all specified and directed and shown on drgs.a) Front legs |
| 12 | b) Rear legs |
| 13 | c) Front/Rear Rails |
| 14 | d) Side rails |
| 15 | e) Arms |
| 16 | f) Stiffner |
| 17 | CHAIR DINING (FD-279)M&L for replacement of the following existing old/broken/unserviceable parts of chair dining with & including new parts of Ist class hard wood (Shisham) made to shape as per drgs including polishing complete to match with existing parts after finishing complete all as specified and directed.a)Front legs |
| 18 | b)Rear legs |
| 19 | c)Front /Rear rails |
| 20 | d)Side Rails |
| 21 | e)Stiffeners bearer. |
| 22 | Removing old worn-out unserviceable cane plastic and M&L for recanning of chair’s all types, bin soiled linen, stool dressing etc complete with and including 2mm wide half round white plastic cane superior quality with Godrej pattern complete all as specifiedand including polishing complete to match with existing parts after finishing complete. (FD-229FD-279,FD-280) |
| 23 | SOFA SET 5 PCs (FD-281, FD-234)M&L for polishing only to fill the denting/cracks/holes if any with first quality putty of three seater and singlr seater sofa all as specified & directed and shown in drawing. |
| 24 | Supply and fixing of tapestry cloth superior quality along with chain facility at one side for easy removing and fixing of cushion and washing purpose (Ten Nos per set) complete all as specified and directed. |
| 25 | M&L for removing of old cushion seat & back complete & supply & fixing new foam cushion 100mm thick 32 density (Ten Nos per set) as per the existing size complete all as specified and directed. Make :- Kurl on/Sleepwell |
| 26 | Repair to Charpoy GI Pipe with ply wood top( Convert GI Newar to Ply Top)Removing unserviceable long rails from charpoy GI Pipe, supply and fixing new GI long rail as per IS-1239 med grade 32 mm bore duly threaded as shown in drg. |
| 27 | M&L Removing unsv ply wood and replacing with new 12mm plywood top of size 1980x900 mm gde BWR type ISI marked fixed with 13 MS bolt 6mm dia including washer and nuts as directed by Engr-in-Charge |
| 28 | Supply and fixing of two nos ms flat strips 25 mm width 5 mm thick and 905 mm long on equal dividation on the gi charpoy for strengthening and holding of 12 mm ply and make holes on both ends to fit 5mm thick counter sunck machine screw 75mm long alongwith washers and nuts. |
| 29 | GI long rail obtained vide item 7.01 shall be converted into short rail and fixing duly threaded as shown on drawing in replace on unserviceable short rails. |
| 30 | GI short rails obtained vide item No 7.02 above shall be converted into leg and fix in place of unserviceable legs duly threaded in charpoy GI |
| 31 | Removing unserviceable GI elbow from charpoy GI, supply and fixing new GI elbow three way ISI mark (med grade) 32 mm |
| 32 | Removing unserviceable GI check nut, supply and fixing of new GI check nut 32 mm dia (medium grade) |
| 33 | Peg table(a)Taken out old UNSV top of Peg Table and supply and fixing of 18/19 mm thick, prelaminated particle board bounded with phenol formal dehyde one side teak face other side white in colour including 4 mm thick 1st class hard wood (teak) beading around the sutter all as shown in drawing and as directed by Engineer-in-Charge.Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge. |
| 34 | (b) Taken out old UNSV legs of Peg Table and supply and fixing legs with Ist class hard wood (shisham) made to shape as of size 380 X 30 X 50mm. |
| 35 | (c) Taken out old UNSV stiffner of Peg Table and supply and fixing stiffner with Ist class hard wood (shisham) made to shape as of size 30x40x450mm |
| 36 | (d) Taken out old UNSV bottom rails of Peg Table and supply and fixing legs with Ist class hard wood (shisham) made to shape as of size Bottom rails 20 x 40 x 450 |
| 37 | (e) Removing unserviceable pvc rubber shoes of peg table and supply and fixing ofhigh nylon buffersshall be provided to bottom of all legs |
| 38 | TABLE CENTRE (FD-235)M&L for replacement of the following existing old/broken/unserviceable parts of table centre with & including new parts made to shape as per drg inclpolishing complete to match with existing parts after finishing complete all as specified and directed and shwon in drgs.(a)Top of table centre made out of pre laminated particle board 18/19 mm thick of teak shade on top of size 900 x 450 mm covered with 4 mm thick teak wood beading all round complete.Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge. |
| 39 | (b)Legs wih Ist class hard wood (shisham) made to shape and size as per drg complete |
| 40 | (c)Long rail of Ist class hard wood (shisham) made to shape and size as per drg complete |
| 41 | (d)Short rail ofIst class hard wood (shisham) made to shape and size as per drg complete |
| 42 | (e) Removing unserviceable pvc rubber shoes of Table Centre and supply and fixing ofhigh nylon buffersshall be provided to bottom of all legs |
| 43 | TABLE 900 X 600 MM WITH AND W/O DRAWERS (FD-283 & FD-284)M&L for replacement of the following existing old/broken/unserviceable parts of table 900 x 600 mm with and w/o drawers from with & including new parts made to shape as per drg inclpolishing complete to match with existing parts after finishing complete all as specified & directed and shwon on drgs.(a)Top of table made out of prelaminated board of 18/19 mm thick of teak shade on top of size 900 x 600 mm duly covered with 4mm thick teak wood beading alround complete . Make :- Kitply/Greenply or equivalant as approved by Engr-in-Charge. |
| 44 | (b)Legs with Ist class hard wood (shisham) made to shape as per drg of size 760 x 60x60 mm |
| 45 | (c)Top rail with Ist class hard wood (shisham) made to shape as per drg of size 760 x 25x65 mm |
| 46 | (d)Stiiffeners with Ist class hard wood (shisham)made to shape as per drg of size 460 x 25x40 mm |
| 47 | (e) Removing unserviceable pvc rubber shoes of Tables and supply and fixing ofhigh nylon buffersshall be provided to bottom of all legs |
