|
| 1 | M & L for brick work with modular size burnt fly ash bricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6) including demolitioncomplete all as specified |
| 2 | M & L for except brick with modular size burnt sub class Bbricks, straight or curved on plan exc. 6 m mean radius built in cement mortar (1:6) including demolitioncomplete all as specified |
| 3 | M & L for rendering 15mm thick plaster in CM (1:6) onfaces of brick work or concrete surfaces,finished even and smooth without using extra cement complete all as specified and directed. |
| 4 | M & L for rendering 15mm thick plaster in CM (1:6) onfaces of brick work or concrete surfaces,finished even and smooth without using extra cement including taking down complete all as specified and directed. |
| 5 | M & L for rendering 15mm thick plaster in CM (1:4) onfaces of brickwork or concrete surfaces, finished even and smooth without using extra cement mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including taking down plaster all as specified and directed. ( WPC shall be measured and paid separatily) |
| 6 | M&l for rendering 5mm thick in on ceiling concrete surface using mortar 1:3 mixed with Dr fixit pidiproof LW 200ml/50Kg of cement and finished even and smooth without using extra cement including taking down plaster and directed. |
| 7 | Supply ony liquied water proofing compound |
| 8 | M&L for preparation of newly plastered surfaces of wall , pilesters,cornices etc applying of two coats of 100% premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489-2004, Alkali and fungal resistance,dirt resistance exterior paint of required shade (Company Depot Tinted) 1.43 litre/10sqm over and including priming coat of exterior primer applied @ 0.90 litre /10sqm over new surface including preparation of new surfaces all as specified and directed. |
| 9 | M & L for preparation of newly plasteredsurfaces of wallapplying of one coat of white wash on ceilingetc complete all as specified and as directed. |
| 10 | M & L for newly plastered surfeces and applying of two coat of oil bound distempering and over one coat of Chawlk whiting/cement based wall primer and all as specified and directed. |
| 11 | M&L Granite 20 mm thick(of any type) work (table rubbed and polished) for wall lining (Veneering to wall) and laid on cill ofparapit wall over12 mm thick in cement mortar (1:3) and pointing with white cement (1:2) using marble dust with admixture of pigment to match with shade of granite colour Red or brown as per direction of GE including demolition. |
| 12 | M & L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab inclunding rubbing and polishing completeincluding screed bed 15mm thick in CM (1:6) including demolitioncomplete all as specified and directed. |
| 13 | All as per item no - 18but as in skirtingover 10mm thick rendering in CM (1:4 ) including demolition complete all as specified and directed. |
| 14 | Rounding to edges of stone slabs such as granite,kota stone etc one edge such as steps cooking platform and other similar situations complete all as specified and as directed. |
| 15 | Grinding cutting and polishing to surfaces of existing kota stone floor/skirting/dado complete all as specified and directed. |
| 16 | M & L for chequered cement concrete tiles 40cm x 40cm x 25 to 30mm thick (Glosy finished)with grey cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete including demolition all as specified and directed. |
| 17 | M & L exceptfor chequered cement concrete tiles 40cm x 40cm x 25 to 30mm thick (Glosy finished)with grey cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete including demolition all as specified and directed. |
| 18 | M & L for chequered cement concrete tiles 20cm x 20cm x 25 to 30mm thick (Glosy finished)with grey cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete including demolition all as specified and directed. |
| 19 | M & L Except for chequered cement concrete tiles 20cm x 20cm x 25 to 30mm thick (Glosy finished)with grey cementandpigment, including 15mm thick screed in CM 1:6, set jointed & pointed in neat cement slurry in floors and cut & polished complete including demolition all as specified and directed. |
| 20 | M & L for machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile complete including demolition all as directed.(Note: Sand cushioning over will be measured & paid seperately. |
| 21 | M & L for except machine pressed precast concrete interlocking paver block (glosy finished) any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigmentlaid on 50 mm thick stone dust cushioning laid dry to the profile complete including demolition all as directed.(Note: Sand cushioning over will be measured & paid seperately. |
| 22 | M & L for 50mm thick Stone dust filling under floors including watering and consolidation allas specified and directed. |
| 23 | M & L for PCC (1:5:10) type E2 using 40mm graded stone aggregate in foundations, filling and mass concrete, sunken floors complete including demolition all as specified and directed. |
| 24 | M&L for 75 mm thick PCC 1:3:6 type C-2 (using 20mm graded stone aggregate) as in plinth protection Finishing surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete including demolition of cc all as specified and directed. |
| 25 | M&L for 100 mm thick PCC 1:2:4 type B-2 (using 40mm graded stone aggregate) cement concrete floor surfaces of concrete topping even and fair (without using extra cement) including making joint at every 3 mtr interval and at corner and filled with mixture of bitumen and sand and finished even and fair and laid in alternate bays complete including demolition all as specified and directed. |
| 26 | M & Lfor plain cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate, 40mm thick as in flooring, coping,finish the surfaces even and smooth with using extra cement complete as specified and directed. |
| 27 | M & L for provide PVC spout pipe of 25mm bore & 45cm length in sunken floor including cutting holes in brick walls built in cement mortor and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified. |
| 28 | M & L for cutting holes in brick walls built in cement mortor Exc one one brick but not exc two bricks at the starting point of down take soil/waste pipe at any floor, fill the joint of down take pipe & trap with thick mortor in CM 1:3and making good the dismantled portion in PCC (1:2:4), type B1 with using 20mm graded stone aggregate with wall finish at the disturbed portion of external surfaces complete as directed and specified. |
| 29 | M& L for provide water proofing to sunken floor surfaces of RCC slab by the following specification including taking down and cleaning of odl surface as specified and directed.(a) Provide PCC (1:1.5:3) Type Ao with using 12.50mm graded stone aggregate in slopw of avarage thickness 50mm mixed and including liquid water proofing compound PIDIPROOF LW 100+ manufactured by Dr Fixit or Equivalent as approved by GE.(b) M&L for rendeering 15 thickness in CM 1:3 mixed with including water proofing compound on sides of (Vertical surface) Sunken/RCC slab/Parapat wall (c) Appy first coat of Dr Fixit fatsflex with a stiff nylon brush and leave 4 to 6 Hrs for dry(d) After 4 to 6 hrs completion offirst coat apply second caot the direction of 90 degree to the second coat and leave 4 to 6 hrs for dry.(e) After 4 to 6 hrs completion ofsecond coat apply third coat the direction of 90 degree to the second coat and leave 4 to 6 hrs for dry. Note : WPT shall be measured & Paid separatly, |
| 30 | S & F in repair ofvitreous china squatting Pan “Orissa” Pattern, of size 580mm x 440mm white with integral foot rests (excluding flushing cistern and flush pipe)and squatting pan and trap, including connection to trap, and to fushing pipe , antisyphonage pipe, etc comlete including making to floor all as specified and directed. |
| 31 | Supply and fixin repair ofwash hand basins, vitreous china,of size 550x400mm (flat back, or angle back type)including cutting for and pinning in ends of brackets or erecting stand exclusive of fixing of supply and waste pipe etc complete all as specified and directed. |
| 32 | S&F in repairs of padestal pattern Vitreous china wash down water closet pan white colour, with 110mm PVC(SWR) \"P\" Trap including joint run and leadfront or back inlet,connection to drain (or out going pipe ) and to flushing pipe antisyphone pipe plastic water closet seat cover white closed pattern with flat bottom and covercomplete as specified and directed. |
| 33 | S&F in repair of Vitreous China uninal bowl typecoloured, with PTMTurinal spreader for fixing with 15 mm dia pipe. type union for discharge pipe, , providing and fixing plugs, bedding urinals against the wall in cement mortar (1:2), securing urinal to plugs with and including 60mm long steel screws, pointing around the urinal back in cement, complete all as specified and directed. |
| 34 | Supply & fixin repairs of Urinal spreader of PTMT any colour for fixing with 15 mm dia pipe. (Minimum weight 60gms) |
| 35 | S& F in repairs to mild steel chromium plated health fucet with 1mtr SS tube and hook all as complete specified and directed |
| 36 | S&F in repairs chromium plated jet for EWC with 1.00 Mtr S S pipe including necessary GI fitting as required like toir,nipple etc all as specified and directed. |
| 37 | S&F in repiar fancychromium plated two way bib cock of 15mm bor two way bibcock screwed for iron pipe or brass feruulr etc complete all as specified and directed. |
| 38 | Repair on low level flushing cistern i.e adjustment of syphon washer,adjustment of handle, float valve as required making the istern fuctional all as specified and directed |
| 39 | S & F in repair of CP brass fancy type 15mm bore bib taps, screwed down , and screwed for iron pipe or for brass ferrule complete all as specified and directed. |
| 40 | S & F in repair of Bib tap standard of PTMT any colour 15mm bore high pressure screwed for iron pipe and fixed all as specified and directed |
| 41 | S&F in repair of 15mm bore pillar taps, cast copper alloy with capstan heads, chromium plated,fancy type screwed down high pressure with or without lettered “HOT” or “COLD” with long screwed shanks and fly nutscomplete all as specified and directed. |
| 42 | S & F in repair of 15mm bore, 450mm long, PVC connections with brass unions internally threaded both ends complete fixed to iron pipe at both ends complete all as specified and directed. |
| 43 | S & F in repair of CP fancy type stop valve ,cast copper alloy, screwed both ends for iron pipe orforunionof 15mm bore complete all as specified and directed. |
| 44 | S& F in repairs CP Fancy type Angle coack one way, brass chromium plated, fixed to iron pipe or for unions 15mm bore complete all as specified and directed. |
| 45 | S&F in repairs to spindle brass for concealed stopcock 15/20mm bore size all as specified and directed. |
| 46 | S & F in repairs of CP Brass Fancy type shower rose 15mm dia with 125mm long CP Nipple of approved quality complete all as specified and directed. |
| 47 | M&L for glazed ceramic coloured tiles300mm x 200 mmsize6 to 7mm thick in dados or skirting over & including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles including dismantling as directed and specified. |
| 48 | M&L for glazed ceramic coloured tiles450mm x 300 mmsize6 to 7mm thick in dados or skirting over & including rendering 10mm thick in CM (1:4), jointed in neat grey cement slurry and pointed in white or colour cement to match the tiles including dismantling as directed and specified. |
| 49 | M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.06 Sqm but n. exc 0.11 Sqm,over & including 15mm thick screed bed in CM (1:6) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantling as directed and specified. |
| 50 | M & L for Non skid ceramic tiles coloured, 7 to 8 mm thick (Square / rectangular ) area of each tile exceeding 0.11 Sqm but n. exc 0.18 Sqm,over & including 15mm thick screed bed in CM (1:4) in floors etc set and jointed in neat cement slurry and pointed in white or coloured cement to match the tiles including dismantlingas directed and specified. |
| 51 | M & L forscratch vitrified ceramic tiles of size 10 mm thick (light shade) (Square/rectangular) area of each tilen exc 0.36 sqm, in floors, set & jointed in neatcement slurry and pointed in coloured cement over and including 15mm screed in CM 1:6or with chemical cement to match including dismantling complete all as specified and directed. |
| 52 | All as per item No 15 above but in skirting over & including 10mm thick renderingin CM 1:4 including dismantling pecified and directed. |
| 53 | S&F in repairs 15mm dia brass CP for Wall mixier Hot & Hold water screwed down for iron pipe and fixedall as specified and directed. |
| 54 | S&F for soap dish chromiumplated brass fixed with brass nuts as in repair all as specified and directed. |
| 55 | S& F toilet paper holder brass chromium plated as in repair all as specified and directed. |
| 56 | S&F in repair s towel rail 600mm long 20mm dia brass chromium plated fixed with wooden guilteis embedded in cement mortar (1:3) with MS screws etc complete all as specified |
| 57 | S & F in repair of LDPE pipe 32mmbore fixed to wall/ceiling with bends/elbow complete all as specified. |
| 58 | S&F in repair of stainles steel gratingsround type 150mm size of(Min Weight100 gms) complete all as specified and directed. |
| 59 | S&F in repair ofPVC valveless, syphonic action type flushing cistern,low/high level white with inlet ball valve float and handle including brackets complete fixrd in repair capacity of flush 10 ltrs complete all as specified and directed. |
| 60 | S&F in repairs PVC flush pipe of 32mm dia pipe with two Nos check nuts for connecting low level flushing cisterb to EWC complete all as specified and directed |
| 61 | S&F in repairs brass chromium plated waste coupling 32mm bore for WHB complete all as specified. |
| 62 | All as per item Noabove but 40mm bore for sink all as specified and directed. |
| 63 | S & F in repair of 20mm boreball valve highpressure of PTMT with epoxy coated aluminium rod and high density plastic ball screwed for iron pipecomplete all as specified and directed. |
| 64 | S&F PVC waste pipe fixed to any type of coupling of N. Exc 1.50m length complete all as specified and directed. |
| 65 | All as per item No above but 40mm bore for sink/urinal all as specified and directed |
| 66 | S&F in repairs stainless steel plate rack of size 900X750X250mm depth size made out of 0.75mm thick sheet all as specified and directed. |
| 67 | S&F Stainless steel sink with drainage board made out of 1.00mm thick sheet for kitchen CM dwraf wall and incl fixing cast iron cantiliver bracket connecting union over all size not less than 915MX460mm with bowl size 410X330X160mm all as specified and directed. |
| 68 | Supplying & Fixing in repair of rotational moulded polythylene 500 Ltr capacity water storage tank (double layer)(cylindrical/vertical with closte top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete |
| 69 | S & F in repair of rotational moulded polythylene water storage tanks(double layer), 1000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 20mm bore complete all as specified and directed. |
| 70 | S & F in repair ofrotational moulded polythylene water storage tanks(double layer), 2000 Ltrs capacity, (Cylindrical vertical with closed top) hoisted and fixed in position all as specified in SSR Part-I including providing and fixing PTMT ball valve high pressure with polythene float and fly nut, 25mm bore complete all as specified and directed. |
| 71 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 500 Ltrs capacity complete all as specified. |
| 72 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 1000 Ltrs capacity complete all as specified. |
| 73 | Cleaning & removing all scale and dirt etc from tank and from mouth of circulating pipe etc of 2000 Ltrs capacity complete all as specified. |
| 74 | S&F in repair ofwater storage tank Coverany size of Tank capacity complete all as specified and directed. |
| 75 | S&F in repair of gun metal gate valves 20 mm with lever arm screwd both ends for iron pipes complete all as specified and directed. |
| 76 | S&F in repair of gun metal gate valves 25 mm with lever arm screwd both ends for iron pipes complete all as specified and directed. |
| 77 | S& F in repairs of sheet glass shelf assembly, approved make, consisting of 5.5mm thick sheet glass shelf 12 cm wide with chromium plated bracket guard and railing 60cm long completeall as specified & directed. |
| 78 | S&F in repairs of Framed mirror of 5 to 6 mm thick selected quality glass of size 600 x 450 mm mounted on 6mm thickAC building board or commercial plywood andfixed to wooden plug with Chromium Plated brass screw and cup washers complete complete all as specified & directed. |
| 79 | S&F as in repairbevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers |
| 80 | M&L forPVC (SWR) floor trap 75mm dia meter of out let,plain with grating including jointing with solvent cementcompleteall as specified & directed. |
| 81 | M&L forPVC (SWR) multifloor trap 75mm dia meter of out let,plain with grating including jointing with solvent cementcompleteall as specified & directed. |
| 82 | S & F in repair of PVC body bathroom cabinet with mirror fancy type made out of 5.5mm thick mirror of size 550 x 450mm complete, Model No 555 of PRAYAGorequivalent as approved complete all as specified and directed. |
| 83 | S & F in repair of plastic water closet seat cover white closed pattern with flat bottom and cover with mild steel/ chromium plated or aluminised hinging device complete all as specified and directed. |
| 84 | S&F in repair of110mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clipcomplete all as specified and directed.. |
| 85 | S&F in repair of 75mm bore of PVC (SWR) pipes single socketed in any length with rubber ring joints laid on wall / floor with clip complete all as specified and directed.. |
| 86 | S&F PVC (SWR) branch pice, single (Single Y) equal or unequal 110mm sizeall as specified and directed. |
| 87 | S&F PVC ( SWR) bends any radius bore of 110 mm all as specified and directed |
| 88 | S&F PVC ( SWR) bends any radius bore of 75 mm all as specified and directed |
| 89 | S&F in repairs 25mm dia Stailess steel curtain rod as approved by GE complete all as specified abd directed. |
| 90 | S&F in repairs 25mm dia stainless steel decoaratve brackets brackets with approved by GE complete all specified and dircted. |
| 91 | Supplying and laying of CPVC pipes 15mm SDR 11 & Plain CPVC SDR 11 fittings on walls/ceiling or laying in floors including Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exc 10 cm girth complete all as specified. |
| 92 | Taking up or down steel tubing 15mm bore &connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed. |
| 93 | Taking up or down steel tubing 20mm bore &connections and S & F GI tubing medium grade with all fittings & fixed complete to walls /ceiling or laid in floors all complete all as specified and directed. |
| 94 | Taking down door shutter with frame n exc 1.5 Sqm each without taking of shutter from the frame complete all as specified and directed. |
| 95 | S&Ffor factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete devetailed or welded complete all as specified. |
| 96 | S&Ffor factory made steel Window , with side hung shutter including projecting hinges with steel handle, stay complete without glazing bar and guard bar devetailed or welded complete all as specified. |
| 97 | S&Fof steel ventilator fixed type with glazing bar complete all as specified and as directed |
| 98 | S&F for PVC door frames of sizes 50 x 47 mm made out of 5 mm prelam PVC sheet reinforced with MS Square tube in opening of suitable size complete all as specified and directed. |
| 99 | S&F Factory made (Prelam on both sides) solid panel PVC door shutter 30 mm thick (Style) consisting of frame made out of MS tubes for top and bottom rails, MS frame shall covered with heat moulded prelam PVC \"C\" channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for styles and prelamPVC sheets for top rail, lock rail and bottom rail in either side and as gap insert for top rail and bottom rail pannelling of prelam PVC sheet to be filled in the MS welded/sealed to the styles and rails with suitable PVC sheet beading and jointed together wiht solvent and fixing in the frame at site as per specification and drawing complete all as specified and directed. |
| 100 | Taking down chowkhats or frames with shutters without taking off shutters from the frame exceeding 1.5 Sqm but not exceeding 4 Sqm each andall as specified and directed. |
| 101 | Taking down shutters of any descriptionareaNot exceeding 1.00 Sqmall as specified and directed. |
| 102 | Taking down shutters of any descriptionarea exceeding 1.00 Sqm and not exceeding 2.0 Sqm all as specified and directed. |
| 103 | S & F 35mm thick second class hard wood glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc. (without sash bars), edges of framing plain, chamfered or rounded, fitted with cut and mitred beads for securing glass, etc.; size of members of shutters as specified in SSR Part – I, Section – 8, clause 8.24(a) ; supplied and fitted to chowkats all as specified and directed. |
| 104 | S & F second class HardWoodshutters 35mm thick, plain framed panelled shutter factory made(two panel) with lock rail & panel of 9mm BWP commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and style as per IS:1003 complete all as specified and directed. |
| 105 | M&L for pressed steel frames size 105X60mm for doors withone or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed. |
| 106 | M&L for pressed steel frames size 165X60mm for doors withone or more rebates including necessary fixing lugs,hinges,lock strike plate.etc completet all as specified and directed. |
| 107 | S&F stainless steel wire cloth 0.36mm nominal dia of wire andaverage width of aperture 1.40mm and fixed with stainless steel wire stapples complete all as specified and directed. |
| 108 | S & Fin repair of Galvanised MS wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18mm fixed with tinned tacks or galvanized wire staples including takingout old wire mesh from steel window and fixing old steel flats and nut complete all as specified and directed. |
| 109 | S & F figuredglass 3mm thick pin head type and glazing with oil putty and securing with glazing pins not exceeding 0.50 Sqm in each pan complete all including hacking out as specified and directed by Engineer - in - Charge . |
| 110 | M & L for plain sheet glass 3.0 mm thick ( up to G+3 storied building) ordinary quality and glazing with oil putty, in squares n. exc 0.5 Sq.M in each pan incl hacking out complete all as specified and directed. |
| 111 | S & F Framed work as in doors or gates of angle or other section with gusset plates, rails,braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (incl steel sheeting or other covering, also fastening and fixing complete including dismantling. |
| 112 | S & FRoof trusses, trussed, purlins, crane gantries, rails and fastenings and heavy bracket framing (Beam, tee, angle, channel or flat sections) including distance pieces, cleats etc conforming to Fe-410-w Gde-E-250 Quality-A complete including dismantling of old iron all as specified and directed. |
| 113 | S & FPre- painted galvatume aluminum zinc coating GI based corrugated (profile pattern) steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete including dismantling all as specified and directed. |
| 114 | S & FPre- painted galvatume aluminum zinc coating GI basedplainsteel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in\ roof covering/cladding to wall, fixed with self tapping screws as specified complete all as specified and directed. |
| 115 | S & F for 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified and as directed. |
| 116 | S & F in repair 100mm long aluminium alloy with galvanised mild steel mild steel hinge pin,anodised and fixed B-22 all as specified and as directed. |
| 117 | S & F in repair100mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 118 | S & F in repair75mm long butt hinges medium weight cold rolled mild steel complete all as specified |
| 119 | S&Ffor 200 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified. |
| 120 | S&F in repair 200 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified. |
| 121 | S&Fin repair150 mm long Aluminium anodizes barrel tower bolts of extruded section complete all as specified. |
| 122 | S&F150 mm size aluminium anodized handle complete all as specified |
| 123 | S&F in repiar 150 mm size aluminium anodized handle complete all as specified |
| 124 | S & F in repair of mild steel ordinary rat tail rod pattern spring 300mm size including roller & roller plate complete all as specified and as directed |
| 125 | S & F in repairsof aluminium floor door stoppers double legged length 140mm with hard drawn steel spring fitted in floor complete all as specified and directed. |
| 126 | M & L for preparation of new wood surfaces of any description over 10cm in girth or width & applying two coats of synthetic enamel paint over a coat of primer complete all as specified |
| 127 | M&L for painting with two coats of synthetic enamel paint to steel surfaces of any description over 10cm width or girth on untreated steel surfaces over a coat of red oxide primer after preparation of surfaces complete all as specified and directed. |
| 128 | S&F in repair of 18/19mm thick block boards grade 2 quality, interior grade, commercial type as in shelves and partitions of cup boards fixed with screws to under frame workinculding 6 mm thick teak wood lippingedging on all sides complete all as specified and directed. |
| 129 | M&L for 19mm thick prelaminated particle board both sides with decorative choice including necessary second class hard wood 6mm edging for cup board all as specified and directed, |
| 130 | S&F for plain solid stright chowkhats and frames,wrought framed rebated on the solid,rounded or chemfered,put togather with glue pinned at joints all as specified and directed. |
| 131 | S & F continuos ( Piano) hinges mild steel, bright finish or electrogalvanized 30mm width flap ( When open) type all as specified and directed. |
| 132 | M&L welding in repairs not exceeding 2.5 cm in length to the thickness of metalto be welded 9mm but N.exc 20mmcomplete all as specified and as directed. |
| 133 | M & L for preparation of surfaces of bldg No plate / tab of any size and apply one coat of synthetic enamel paint and writing letters or figures (Block, Roamn, Italic or Indian) of not less than 50 mm heightand not less than15mm width incl, stops, commas, lines etc complete all as specified and directed. |
| 134 | Providing and fixing false ceiling at all heights with integral densified calsium silicate reinforced with fibre and natural filler false ceilling tiles of size 595X595mm ofapprovedtexture, design and pattern pinhole 8mmthick semiperforated square edge tile having NRC( noise reduction cogfficient ) of 0.50(minimum) Light refluctance of 85% (minimum) Non combustable as per BS : 476(PART-4) fire performance as per BS : 476(PART 6&7) humidity resistence of 100% thermal conductivity <0.043W/m K as per ASTM 518:1991, intrue horizontal level suspended on interlocking metal powder coated T-grid of hot dipped galvanized iron section on silhouuetter proffile,stitched duoble webbed white with 1mm reveal proffile ( White/black) comprising of main-T runner of size 15X 32mm of lenght 3000mm, cross-T of size 15 X 32MM of lenght1200mm and secondary intermediate cross-T of size 15 X32mm of lenght 600mm to form grid module of size 600X600mm,from ceiling using galvanized mild steelitem, 8mm outer daimeter M-6 dash fasteners, 6mm dia threaded hanger rod and L- shape leval adjuster of size 85X25X2mm Galvanized iron perimeter wall angle of size 19 X 19mm of lenght 3000mm to be fixed on periphery wall/Partition with the help of plastic rawl plugs at 450mm cetre and 40mm long dry wall SS screws. The work shall carried out as per specifications, drawing andincluding dismantling of ceiling boardas per direction of the Engineer-in-Charge. |
| 135 | M&L exceptExposed metal frame ceiling with calcium silicate board of siliceous and calcareous material reinforced with cellulose fibre for fixing in 600x600 gridcomplete all as specified and directed. |
| 136 | M & L Preparation of old painted wooden surfaces of any description not otherwise description over 10 CM width or grith and apply one coat of synthetic enamel complete all as directed. |
| 137 | M & L for preparation old painted surfaces of steel and iron work of any description over 10cm width or girth and applying one coat of synthetic enamel paint complete all as specified and as directed. |
| 138 | M & L for reparing of RCC projection, chajjas,roofs,facia, colum etc by necessary preparation i.e scrapping ,cutting,chiseling,derusting and cleaning exposed reinforecement, surfaces of damaged, loose RCC surfaces and applying one coat of cement slurry and filling the surfaces with cement concrete (1: 1-1/2: 3) using 12.5 mm graded crushed stone aggregate and reinforeced with welded mesh of weight exc 2Kg per sqm but n.exc 3Kg/sqm with or without facia and finished exc 5sqm each and thickness of RCC using coarse sand in patches area not each and thickness of RCC member n.exc 70mm at any height complete all as specified. Note : - Cost of formwork and welded mesh shall be deemed to be included. |
| 139 | M&L for providing water proofing treatment on inaccessible roof surfaces (horizontal and vertical surfaces) through authroised applicator of manufacturers comprising (a) Cleaning of new concerete surfaces properly and drying the surfaces and applying 10mm thick renderingover a coat of cement slurry mixed with WPC (b) M & L for applying a tack coat of Industrial bitumen grade of 85/25 at the rate of 1.2 Kg per Sqm including cleaning surfaces (1st coat for bonding material below membrane and 2nd coat on top of membrane. Each coat will be paid seperately.)(c) Applying a coat of Oxidised bitumen based solvent primer @ 0.30 Kg/Sqr mtr (d) providing 3mm thick APP (Ataclic Polypropylene) modified water proofing membrane with polyestar core, overlaps, sealed and bonded to the surfaces with torch application (e) Applying two coats of bituminous aluminium paint @ 200gm per sqr mtr (min) in two coats as per manufactueres instructions complete all as specified (Cost of water proofing compound shall deem to be included in unit rates quoted by contractors) |
| 140 | Complete removal of existing treatment on External Wall roof projections including facis, cornics etc External surface by Jet washer) by skilled labour andapplying two or more coats of 100% Premium arcylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance , dirt resistance exterior paint of required shade over with 1 mmputty and including priming coat of exterior primer applied Makes :- Nerolac -Excel, Asian - Apex, Burger - Weather coat antidust, Dulux - Weather shield.complete all as specified and directed. |
| 141 | Complete removal of existing treatment on Internal surafaces by scrapping with mechanical sander (having mechanical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free from dust, loose paint etcby skilled labour and applying Two or more coats of1st Quality oil emulsion distemberhaving VOC content less than 50 gms/litre, of approved manufacturer, of required shade and colour over a coat primer including 1 mm puttycomplete, as per manufacturer\"s specification complete all as specified and directed.Makes: Nerolac-Little Master(Beauty), Berger-Bison Lite, Asian- Tractor emulsion spark. |
| 142 | M&L forapplying 1 mm Avg thick wall care putty on wallon internal old/new wall surfaces as per manufacturerer instruction complete all as specified and as directed |
| 143 | M & L preparing old decorated plaster or un-plastered surfaces of ceiling andapplying one coatof white wash complete all as specified and as directed. |
| 144 | M & L preparing old decorated plaster or un-plastered surfaces of walls andapplying two coatof white wash complete all as specified and as directed. |
| 145 | M&L for preparing of old surfaces of wallsand applying one coat of cement base paint all complete as specified and directed. |
| 146 | M&L for prepration of old conc /pcc tile surface of any descripion by brooming with coir/brushes and cleaning and washing the floor surface with water to remove the fine dust and applying two coats of lacquer polish chemical mixed with pigment all as per manufracturer s instruction complete all as specified and directed by engg in charge. |
| 147 | S & F Powder coated aluminium sliding glazedwindows with three track shutter sliding (two shutters glazed and one shutterwire mesh) shall be two part as upper patr shall be three movable shutterand lower part consist three shutter (one openable in centre and both side fixed type shutter with frosted glass) with following specification and making good the adjacent side of jombs of windows by plastering in CM1: 3 even and smooth complete etc . shifting of existing cooler stand where required complete all as specified and as directed by Engr-in-charge.(i)Windows frame of cross section 101mm x 44mm x 1.5mm thick. (Min)(ii)Three way track for sliding shutters of cross section91.8mm x 31.75mm x1.1mm thick.(Min)(iii)Sliding shutter frame of cross section40 x 18 x 1mm thick.(Min)(iv)4 mm thickglass superior quality.(Min)(v) IDPE Rubber guasket for fixing of glass.(vi)Locking cleats per shutter -01 Nos.(Min)(vii)Sliding rollers per shutter - 02 Nos.(Min)(viii) Stainless steelwire cloth 0.30mm nominal dia of wire and average width of aperture 1.40mm for shutters 01 Nos.(Ix)fixing screw for frame with wall per windows- 08 Nos. |
| 148 | S & F powder coated aluminumdoorwith the following specification and making good the adjacent surfaces complete all as specified and as directed:- (a)Cross section of xchowkhat frame 101.60x44.45x2mm thick. (b)Cross section of hanging and meetng style 83x44x2mm thick. (c) Top rail of cross section 114x44x2mm thick. (d)Bottom rail of cross section 114x44x2mm thick.(e)Locking rail (middle rail ) of cross section 83x44x2mm thick. (f)4mm thick tinted glassmake Modi, float . (g)Aluminum handle eisc type -02 Nos per shutter ( inside & out side). (h)Aluminum door stopper heavy duty-01 Nos per shutter. (i)Aluminum tower bolt 200mm long-01 Nos per shutter (inside). (j)Lock with key superior quality makae and type as approved by GE openable both from inside & out side -01 Nos per shutter. |
| 149 | S & F powder coated aluminium ventilator cross section conforming to IS 63.5x38.10x1.5mm consisting of two partions upper portion shall have louvers with 3mm thick pin headed glass and aluminium wire cloth 0.30mm nominal dia of wire and average width of aperture 1.56m fixed with aluminium beads and securing on outer face of frame and lower portion of ventilation shall be fixed with 3mm thick pin headed glass with IDPE rubber gasket including aluminium beads, including preparation of jombs all around in CM 1:3 finishing even and smooth complete all as specified and directed. |
| 150 | Taking down Aluminium door, window,ventilator shutters exc 1 sqm and n exc 4 Sqm eachand refixing in sameopeningafter resetting, resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
| 151 | Taking down wooden door, window,ventilator shutters exc 1 sqm and n exc 4 Sqm eachand refixing in sameopeningafter resetting, resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
| 152 | Taking down steel door, window,ventilator shutters exc 1 sqm and n exc 4 Sqm eachand refixing in sameopeningafter resetting, resecuring or easing & adjusting including necessary bolts and nuts, securing rods, washers etc complete all as specified and directed . |
