|
| 1 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free,straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : For fixed portion Powder coated aluminium (minimum thickness of powder coating 50 micron) |
| 2 | Providing and fixing 12 mm thick perforated particle board flat pressed three layer or graded wood particle board conforming to IS: 12823 Grade l Type ll, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineering-charge. Pre-laminated particle board with decorative lamination on both sides |
| 3 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge (Cost of aluminium snap beading shall be paid in basic item): With float glass panes of 5.0 mm thickness (weight not less than 10kg/sqm) |
| 4 | Providing and fixing aluminium hanging floor door stopper, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. Twin rubber stopper |
| 5 | Providing and fixing aluminium tower bolts, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : 250x10 mm |
| 6 | Providing and fixing aluminium handles, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. complete : 125 mm |
| 7 | Providing and fixing ISI marked aluminium butt hinges anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour or shade with necessary screws etc. complete:100x63x3.2 mm |
| 8 | Providing and fixing bright finished 100 mm mortice lock with 6 levers without pair of handles of approved quality for aluminium door, with necessary screws etccomplete as per direction of Engineer- in-charge. |
| 9 | Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete. each 1025.65 |
| 10 | Providing and fixing tiled false ceiling of specified materials of size 595x595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanized steel sections ( galvanized @ 120 grams/ sqm, both side inclusive) consisting of main \"T\" runner with suitably spaced joints to get required length and of size 24x38 mm made from 0.30 mm thick (minimum) sheet, spaced at 1200mm center to center and cross \"T\" of size 24x25 mm made of 0.30 mm thick (minimum) sheet, 1200 mm long spaced between main \"T\" at 600 mm center to center to form a grid of 1200x600 mm and secondary cross \"T\" of length 600 mm and size 24x25 mm made of 0.30 mm thick (minimum) sheet to be interlocked at middle of the 1200x600 mm panel to form grids of 600x600 mm and wall angle of size 24x24x0.3 mm and laying false ceiling tiles of approved texture in the grid including, required cutting/making, opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc. Main \"T\" runners to be suspended from ceiling using GI slotted cleats of size 27 x 37 x 25 x1.6 mm fixed to ceiling with 12.5 mm dia and 50mm long dash fasteners, 4 mm GI adjustable rods with galvanised butterfly level clips of size 85 x 30 x 0.8 mm spaced at 1200 mm center to center along main T, bottom exposed width of 24 mm of allT-sections shall be pre-painted with polyester paint, all complete for all heights as per specifications, drawings and as directed byEngineer-in-charge. 12.5 mm thick Plain / Semi perforated Gypsum Board tile made from plaster boardof size 595x595 mm |
| 11 | Vinyl Flooring Sheets/ tiles having a nominal total thickness of 2 mm with a wearing surface impregnated polyurethane homogeneous mixture of PVC, Plasticizers, Urethane, colourpigments with wearing resistance and Fire Resistance as per standards |
| 12 | Supply and installation of Pre-Fabricated Modular Operation Theatre wall caladding (M-Section type) with 0.8 mm thickstainless steel grade 316 sheet on both sides of 50 mm thick Puff Insulation (Sandwiched) panels including aluminium covings and applications of silicon sealant at the locations whereever required as per direction of Engineer- in-charge. |
| 13 | Supply and installation of wall caladding with 0.8 mm thickstainless steel grade 316 sheet on existing walls / other surfaces including aluminium covings and applications of silicon sealant at the locations whereever required as per direction of Engineer- in-charge. |
| 14 | Providing and fixing 12 mm thick pre-laminated board (High Pressure Laminates)which is Boiling Water Proof,Anti-Virus, Anti-Bacterial, Resistance to Fire, Wet-Heat Tested, Dry-HeatTested, Great Dimensional Stability, GreatHorizontal/ Vertical Application, LowEmission, ScuffResistant, ExcellentSelf-Supporting Feature, ScratchResistant ,Abrasion Resistant, Resistance to Microbial Growth, Resistance to Harmful Chemical and Organic Solvent, in panelling fixed in aluminum doors, windows shutters and partition frames with C.P. brass / stainless steel screws etc. complete as perarchitectural drawings and directions of engineering-charge. |
| 15 | Supplying and fixing of 25 mm size of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required. |
| 16 | Supply and fixing of 25 mm SWR reinforced Flexible Conduit Pipe |
| 17 | Supply and fixing of 50mm X 50mm UPVC Mini Trunking along with Eternal Angle / Flat angle / Internal angle/T joints/ end caps and fasteners in complete as required including labour charges etc., |
| 18 | Supply and fixing of 32mm X 12.5mm UPVC Mini Trunking along with flat angle and end caps including labour charges etc., |
| 19 | Wiring for light point/fan point /exhaust fan point/ call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FRLS PVC insulated copper conductor single core cable etc as required.(Group C). |
| 20 | Supplying and drawingofFRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required.2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 21 | Supplying and drawingofFRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire. |
| 22 | Supplying and drawingofFRLS PVC insulated copper conductor, single core cable in the existing surface/ recessed steel/ PVC conduit as required. 2 X 4 sq. mm + 1 X 4 sq. mm earth wire. |
| 23 | Wiring for circuit/ submain wiring alongwith earth wire with the 4 X 10 sq. mm + 2 X 6 sq. mm earth wire sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required (including Conduit). |
| 24 | Supply, Transportation and Installation of 300mm x 50mm x 2mm thick hot dip GI perforated/GI cable tray with cover along with coupler plates, T\"s, Bends, Reducers, Anchor bolts, nuts, washers and slotted channels / Angle Iron Channels etc complete and the tray should be fitted on the wall / Ceiling etc. complete for finished item of work. |
| 25 | Supply and Transportation of 30-36 W +/-10% (>=3600 Lumens) Back lit, 2\" x2\" (600mm x 600mm) Recessed / Surface mounted LED luminaire made of CRCA sheet housing with powder coated with high efficiency acrylic wide diffuser, with wide operating voltage range, Power factor > 0.9, Surge protection >2KV, System efficacy of >100 lumens/watt, CCT: 3000K - 6500K as desired by the department, CRI >80, and THD is less than 15% etc., complete with 5 years warranty with BIS Certification. |
| 26 | Installation,testing and commissioning of pre-wired, flourescent fitting/LED fitting of all types, complete with all accessories etc directly on ceiling/wall, including connections with 1.5 Sq.mm FRLS PVC insulated , copper conductor, single core cable and earthing etc. as required |
| 27 | Supply ,Installation,Testing and Commissioning of 1200 mm sweep, BEE 5 star rated, ceiling fan with Brush Less Direct Current (BLDC) Motor, class of insulation: B, 3 nos. blades,30 cm longdown rod, 2 nos.canopies,shacklekit,safetyrope,copperwinding,PowerFactor notlessthan0.9,ServiceV alue(CM/M/W)minimum6.00,Airdelivery minimum 210 Cum/Min , 350 RPM (tolerance as per IS : 374-2019), THDlessthan10%, compatible toelectronicregulatorunitforspeed control and all remaining accessories including safety pin, nut bolts,washers,temperaturerise=75degreeC(max.),insulationresistance more than 2 mega ohm, suitable for230 V , 50 Hz, single phaseAC Supply ,earthingetc.completeasrequired. |
| 28 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard lengthwith 1.5 sq. mm FRLS PVC insulated |
| 29 | Supply and fixing of Anchor fastner with fan hook / Providing MS Fan hook with grouting and cement plastering |
| 30 | Providing and fixing extra conduit down rod of 20 mm dia, 120 cm length wiring with 2 X 1.5 sq. mm FRLS PVC insulated, copper conductor, single core cable including painting etc. as required. |
| 31 | Supplying and fixing two module stepped type electronic fan regulator on theexisting modular plate switch box including connections but excluding modular plate etc. as required. |
| 32 | Supplying and fixing 1 or 2 Module (75mmX75mm), GI/PVC box alongwith modular base & cover plate for modular switches in recess etc.as required. |
| 33 | Supplying and fixing 5/6 A modular switchon the existing modular plate & switch box including connections but excluding modular plate etc. as required |
| 34 | Supplying and fixing 3 pin, 5 A ceiling rose on the existing junction box/ wooden block including connections etc. as required. |
| 35 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 A modular socket outlet and 5/6 A modular switch, connections etc. as required. |
| 36 | Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 A modular socket outlet and 15/16 A modular switch, connections etc. as required. |
| 37 | Supplying and fixing Single pole MCB5A to 32 A rating, 240/415V, 10kA, C curve miniature circuit breaker suitable for inductive load of following poles in exsisting MCB DB complete with connections,testing and commissining etc.as required. |
| 38 | Supplying and fixing of \"63 A Triple Pole neutral ( FP ) rating 415V 10kA\" \"C \" Curve,Minature circuit breaker suitable for inductive load of FP in the existing MCB DB complete with connections testing and commisioning etc as required. |
| 39 | Supplying and fixing of \"63 A Triple Polerating 415V 10kA\" \"C \" Curve,Minature circuit breaker suitable for inductive load of TP in the existing MCB DB complete with connections testing and commisioning etc as required. |
| 40 | Supplying and fixing 6 way (4 + 18), Double door, horizontal type three pole and neutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator) |
| 41 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 42 | Supplying and fixing modular blanking plate on the existing modular plate & switch box excluding modular plate as required. |
| 43 | Supply and fixing of TW / PVC Round Blocks required size etc. |
| 44 | Dismantling of the existing lights/fans/exhaust fans/switch boards/DB /PVC/ conduit and panel boards,shifting and handover to store |
