|
| 1 | DESCRIPTION OF ITEM |
| 2 | •Floating Public Bathing Kund & Amusement Park should have overall dimensions of L: 25 m, W: 15 m, H: 0.8 m. It should include two kund of size L: 15 m, W: 4 m, H: 0.9 m to 1.2 m. There should be two walkways of dimensions L:10 m, B: 3 m, H: 0.8 m placed towards the shore side for separate entry and exit on the Floating Public Bathing Kund & Amusement Park. •Each Floating module of Floating Public Bathing Kund & Amusement Park should be made of Floating Jetty Modules and should be made of HDPE 5261Z grade raw material whose melt flow rate should be less than 3 g / 10 min @ 190 Degree C and 21.6 kg Load•Each Floating module of Floating Public Bathing Kund & Amusement Park should be of L: 0.5 m, W: 0.5 m, H: 0.4 m. (203 Sq mtr : Double Layer)•Shape of each Floating module of Floating Public Bathing Kund & Amusement Park side surface should be held together 3 dimensionally due to their male - female interlocking shape such that they offer much higher-pressure resistance and strength in water. Weight of each module should be 7 kg – 8 kg.•Load Capacity (Buoyancy) Floating module of Floating Public Bathing Kund & Amusement Park (Double Layer) Floating Modules should be minimum 700 Kg per sq. mtr and Safe Load Capacity of Floating Public Bathing Kund and Amusement Park (Double Layer) Floating Modules should be minimum 400 Kg per sq. mtr.•Floating Public Bathing Kund & Amusement Park should be made of Double layer (Height: 0.80 m) Floating Modules.•Note: Test certificate of Melt Flow Rate of Raw Material of Floating Module of Public Bathing Kund & Amusement Park should be submitted along with the Technical Bid from CIPET India or any reputed research centers which are acceptable internationally.•Proof of Purchase of HDPE 5261Z grade raw material of Floating Module of Floating Public Bathing Kund & Amusement Park should be submitted along with the Technical Bid.•Department may ask for submission of any item sample from any of the bidders for physical technical verification and so the bidder must submit a ‘Self-Attested Undertaking’ in technical bid with assurance of submitting samples within 10 working days at own cost with no liability of department•Both the Floating Bathing Kund’s must be provided with Submerged Floor Modules and should be made up of Polyethylene Material.•Size of Single Submerged Floor Module should be L: 3 m x B: 2 m x H: 0.40 m.(120 Sq mtr : Single layer)•Size of Single Submerged Floor Module should Not be Less Than 5 Sq. Mtr, Load Capacity (Buoyancy) of each Submerged Floor Module should be minimum 2000 Kg.•Manufacturing Process of the Submerged Floor Module should be Rotational Moulding Plastic Manufacturing Techniques.•Top surface of Submerged Floor Module should be CSIRO/Equivalent slip resistant which should be 100% skid proof, corrosion proof, UV treated and made from Virgin Plastic and should be a part of the main body (Relevant Certificate should be submitted with Technical Bid),Weight of Submerged Floor Module should be 200 Kg (± 10 Kg)•Thickness of Single Submerged Floor Module should be Approx. 10 mm to 12 mm Submerged FloorModule should be designed withinterconnecting High Density Rubber Dog Bones at the top and bottom with the help of a SS 316 Studs.•A Minimum of 4 Connections and a Maximum of 6 connections should be used on each side of the Submerged Floor Module when it is connected to other Submerged Floor Module based on the design.•The OEM of the Submerged Floor Module should have a valid Works Approval certificate fromany of the IACS members.This certificate should be submitted along with the technical bid. •The manufacturer of Submerged Floor Module should be manufacturing the Submerged Floor Module of minimum L: 3 m x B: 2 m x H: 0.40 m for the past 5 years.Proof of the same to be provided.•Department may visit Manufacturing Facilities of any of the bidder during technical evaluation for inspection purpose and so the factory addresses have to be provided in the technical bid.•Stability of Larger Submerged Floor Module Blocks: The chosen dimensions of L: 3 m x B: 2 m x H: 0.40 m Submerged Floor Module are intended to provide stability and larger block size to support the floor load efficiently. |
| 3 | •Ramps made up of GI material of L: 4 m, W: 1.5 m should be provided on entry and exit walkway of Floating Public Bathing Kund & Amusement Park•There should be 4 nos. of Staircase provision leading downwards to the Floating Bathing Kund area for easy access. •The staircase should be placed diagonally on either side of each Floating Bathing Kund and each Staircase should be made of SS 304 material and its dimensions should be approx. L:1.2 m, W: 1.5 m with railing on both the sides with checkered grip. •A total of 2 staircases should be provided in each Floating Bathing Kund for easy access•Floating Public Bathing Kund & Amusement Park should be provided with human safety railings on all sides of the structure including the walkways. •Human safety railings should be made up of HDPE material and should have the provision to fix 3 parallel ropes to create a safety barricade•HDPE Heavy Duty Long Fender of Length between 1.2 m to 1.5 m, weight between 5 kg to 7 kg and with 3 lugs to be fixed on the Floating Public bathing Kund & Amusement Park at required places using Nuts & Bolts of same material to protect Floating Public bathing Kund & Amusement Park from being hit directly by the Boats |
| 4 | •10 nos. of Resting Benches made up of PE/ FRP/ G.I./ Equivalent material should be provided on the Floating Public Bathing Kund & Amusement Park where devotees can sit and rest. •The dimensions of the bench should be L: 1.5 m, W: 0.4 m, H: 0.5 m•10 nos. of Additional seating modules near the Floating Bathing Kund area should be provided.•Each seating module should be of one square meter made up of HDPE modules which should be securely attached to the Floating Public Bathing Kund & Amusement Park structure using long nuts. •The center of each sitting module should be designed to accommodate a large foldable umbrella, ensuring shade and comfort for devotees using the structure |
| 5 | •Separate changing rooms for Male and Female should be provided on the adjacent side of the Floating Bathing Kund area. •Total length of the Male/Female changing area should be L: 6 m, W: 3 m, H: 2.4 m. •There should be a total of 5 changing rooms in each changing area with the following dimensions, L: 3 m, W: 1.2 m, H: 2.4 m with taper roof fitted with UPVC and transparent sheets. •Suitable Solar lights to be provided in the changing room. •The material for construction of the structure should be G.I./ Equivalent material of 50mm X 50mm X 2mm. •Walls should be made up of ACP Sheet/ Equivalent material. Air passages should be provided on the top side of changing rooms to accommodate gusty winds and for cooling. •The roof should be fitted with UPVC and transparent sheets. •Changing room should have door with provision of hooks for hanging cloths inside. |
| 6 | •Dedicated shopping area of dimensions L: 14 mtr, W: 2.5 m, H: 2.4 m should be provided on the Floating Public Bathing Kund & Amusement Park.•7 nos. of shops should be constructed in this area. Each shop should be of L: 2.5 m, W: 2 m, H: 2.4 m. Shops should have openings on the side facing the Bathing Kund area. •The material for construction of the structure should be G.I./ Equivalent material of 50mm X 50mmX 2mm. •Walls should be made up of ACP Sheet/ Equivalent material. Air passages should be provided on the top side of the shopping area to accommodate gusty winds and for cooling. •The roof should be fitted with UPVC and transparent sheets. •Suitable Solar lights should be provided to provide light within the shops |
| 7 | •Rotomolded Specialized Polyethylene (PE) Support Boat (Welding Not Allowed) for Routine maintenance of Floating Public Bathing Kund & Amusement Park, Rescue and for Passenger Transport should be provided of following specifications: Material of Hull of the Boat should be Polyethylene (PE), Length of the Boat should be between 440 cm to 470 cm, Width of the Boat should be between 180 cm to 200 cm, Weight of the Boat (Only Hull) should be maximum 290 kg, Capacity of the Boat should be minimum 8 persons, Tiller OBM of minimum 40 HP 2 Stroke Tohatsu / Mercury / Yamaha / Suzuki should be provided, Boat should be any IACS Member Type Approved / Certified (Certificate of Rotomolded Specialized Polyethylene (PE) Support Boat should be submitted along with Technical Bid)•20 Nos. of Solar Blinker Lights should be provided on the Floating Public Bathing Kund & Amusement Park in the front corner areas to help boats/ vessels navigate safely, particularly in months with limited visibility or during nighttime•Anchoring should be done using 20 mm PP Ropes, 50 Kg MS Anchors and Concrete Blocks to keep the Floating Public Bathing Kund & Amusement Park stable and also secure at any time due to the flow of water•Submerged floor of both the Floating Bathing Kunds should be secured using 16 mm G.I. Chains, anchor balancing unit, D-shackles/locking mechanism. Barricading net should be provided on all sides of the submerged Floating Bathing Kund area for the safety of Devotees alighting in the Floating Bathing Kund for holy dip. The net should have 2\" to 3\" passages for flow of water, and it should be secured to the main structure and the submerged floor•Water Ballasting: The Submerged Floor Module must undergo a water ballasting process, ensuring any residue or impurities on the surface are cleared, leading to enhanced bonding between the cubes.•Chains should be used to link these Submerged Floor Module blocks at every 3 to 5 meters.•Chains should be made of high-strength steel, with a diameter between 12 mm and 16 mm, to provide robust support.•WPC Flooring with G.I Framing should be provided on the entire Floating Public Bathing Kund & Amusement Park |
