|
| 1 | Taking down door / window frame with shutter (without taking of shutter from the frame )area n. exc 1.50 sqm complete all as specified and directed. |
| 2 | Taking down door / window frame with shutter (without taking of shutter from the frame )area exc 1.50 sqm but not exc 4 sqm complete all as specified and directed. |
| 3 | Taking down existing water proofing treatment including PCC padding, mortar etc and disposal of rubbish outside of MD land and hacking for key, scrubbing down with water complete all as specified and directed. |
| 4 | M&L for provision of water proofing treatment by using APP torch on non woven polyster film reinforcement with 3 mm thick and weight not less than 3.00 kg/sq m over roof and vertical surfacesincluding preparation of surfaces and applying oil based bituminous primer coat @ 0.30 ltr per sqm on clean and dry surface and then providing APP membrane laid with 100 mm over lap on both sides all as per manufacturer\"s instructions including 15mm thick cement plaster in CM 1:4 with WPC and two coat of aluminium paintof 0.2Kg/Sqm over membrane complete all as specified and directed. |
| 5 | Taking down shutter of any description exc 1 Sqm but not exc. 2 Sqm each and removing from site complete all as specified and as directed. |
| 6 | Dismantling wrought iron or mild steel work of any description not otherwise provided for complete all as spd and directed. |
| 7 | Material & Labour for providing and fixing stainless steel (Grade 304) railing made of hollow tubes,channels, plates etc., including welding, grinding, buffing, polishing and making curvature (where ever required) and fitting the same with necessary stainless steel nuts and bolts complete, including fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc., of required size, on the top of floor or the side of waist slab with suitable arrangement and complete all as spd and directed. |
| 8 | S&F toughned glass 12 mm thick as in hinged doors, partiotion automatic doors and similar work incl cutting to shape ,drilling holes reqd complete all as specified and directed. |
| 9 | S&F 30 mm thick flush shutters solid core construction with block board core and plywood face panels commercial type on both sides complete all as specified and directed. |
| 10 | All as per item no.08081 but wire gauzed i.e. panel will be of wire gauze in lieu of wood grain printed PVC sheet panel. The wire gauze shall be wrapped on an additional square 8mm M.S. Solid tube and this tube shall be welded to M.S. tubes. The wire gauge shall be stretched to tighten firmly |
| 11 | Supply and fixing second class hard wood 35mm thick factory made Plain framed, paneled shutter (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and as directed. |
| 12 | Hacking out old broken glass (any thickness size and quality and description) from wooden/steel/aluminium frames glazed with putty or fixed with beads etc complete all as specified and directed |
| 13 | S&F 4 mm thick figured (frosted) glass, ordinary quality and glazing with oil putty/wooden beads in square not exceeding 0.5 square metre in each pane complete. |
| 14 | S&F Stainless steel wire cloth, 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks, or galvanised wire staples complete all as specified and directed. |
| 15 | All as per item No 14 but wood grain printed PVC sheet used instead of Plaincolour PVC sheet & edges will be painted to match with printed sheet complete all as specified and directed. |
| 16 | Factory Made Solid PVC Moulded Door Shutter, 28 to 30mm thick (stiles), with 2, 4, or 6 raised panel design with 2mm thick Moulded PVC Sheet on the front face & 2mm plain colour PVC sheet on back face, with wood free EPS, supplying & fixing in frame at site as per specification & drawing complete all as specified and directed. |
| 17 | S&F Butt hinges medium weight cold rolled stainless / Mild steel 100mm size complete all as spd and directed. |
| 18 | Supply & fixing 150mm Aluminium barrel tower bolts, fixed complete all as specified and as directed |
| 19 | Supply & fixing 150 mm Aluminium pressed handles fixed complete all as specified and directed. |
| 20 | S & F 250 mm Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded section or cast-aluminium alloy and fixed complete all as specified and directed. |
| 21 | S & F in repairs 40 mm dia, cupboard Knobs fixed with nut, screws and washer of mild steel, bright finished |
| 22 | S & F powder coating aluminium frame for doors, windows , ventilators with one or more rebates incl joining cleat for fixing etc. complete all as spd. (thickness or powder coating not less than 50 micron) |
| 23 | S&F powder coating aluminium door shutters, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing,02 Nos handles, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specifiedand directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 24 | S&F powder coating aluminium window / ventilator shutters, sliding type, slides of two/three/four track without sash bar, aluminium section weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, sliding wheels, including concealed SS body type arragement etc. complete all as specifiedand directed. (thickness or powder coating not less than 50 micron)Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 25 | S&F powder coated aluminium ventilator louvers type section aluminium sections weighing 0.55 Kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws etc louvers after open use in ventilator in order to allow air or light in while keeping sun in or moisture out complete all as specified and directed.(thickness or powder coating not less than 50 micron) Note-(i) Glass and other filling material in panels shall be measured and paid seperately |
| 26 | Material & labourfor preparation of new wooden surface of any description over 10cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and as directed. |
| 27 | M&L for preparation of new steel surfaces of any description over 10 cm in width or girth and applying one coat of synthetic enamel paint etc complete all as specified and directed. |
| 28 | Dismantling floor, hearth or wall tiling including cement mortar beddeing (but not backing), removing serviceable tiles to store and debris complete all as specified and as directed. |
| 29 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.06 sqm but not exceeding. 0.11 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 30 | M & L for coloured non skid ceramic tiles 7 to 8 mm thick (square/rectangular) area of each tile exceeding 0.18 sqm but not exceeding. 0.38 sqm, in floors etc. set and jointed in neat cement slurry and pointed with white or coloured cement to match over and including 15 mm thick screed bed of cement mortar (1:6) etc complete all as specified and as directed. |
| 31 | Material & labour for glazed ceramic coloured tiles 300mm x 450mm, on vertical surface such as skirtings/dados set and jointed in neat cement slurry and pointed in coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 32 | Materials and labour for light shade vitrified ceramic tiles 7-10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match over 15mm thick screed bed or bedding layer in cement mortar 1:4 (including bodder tile) complete all as specified and as directed. |
| 33 | Materials and labour for light shade vitrified ceramic tiles 10mm thick (square/rectangular), polished, area of each tiles n.exc 0.36 sqm as in vertical surfaces, set and jointed in neat cement slurry and pointed in white or coloured cement to match and incl.10mm thick backing coat in CM 1:3 finished even and fair complete all as specified. |
| 34 | Built in steel cup board shutter made out mild steel, plain back sheet 1 mm thick as in shutter and 1.25 mm thick in frame work, cut to size, holes punched, welding, riveting, turning, bending etc. as require to made it in Godrej pattern complete with hinges, fasteners, locking system, 3 lever lock and CP handle, incl 2 coats of synthetic enamel paint over a coat of red oxide primer with spray machine complete all as shown on drawing. |
| 35 | S&F pre-polished granite 20mm thick fixed on platform/shelves/steps/cill over 20mm thickscreed bedin cement mortar 1:4 including necessary moulding etc complete all as directed. |
| 36 | Demolition of cement concrete any description and in any position not otherwise specifically provided forcomplete all as specified and directed. |
| 37 | M&L 75 mm thick cement concrete type C-2, 1:3:6 (40 mm graded aggregate) finishing cement concrete surface even and smooth without using extra cement as in plinth protection complete all as spd and directed. |
| 38 | Demolition of brick work, built in cement mortar or cement lime mortar including all quoins, pillars etc. and disposal of unserviceable materials, debris and rubbish to a distance not exceeding 50m as directed by the Engineer-in-Charge |
| 39 | M&L for brick with fly ash brick old size straight of curved on plan exc 6 m mean radius built in CM 1:6complete all as specified and as directed. |
| 40 | All as per item No 39 here-in-above but half brick wall in CM 1:4. complete all as specified and as directed. |
| 41 | Taking down cement Plaster on brick or stone walls, etc., including raking out joints, hacking for key, scrubbing down with water, etc., including removal of debris, complete all as specified and as directed |
| 42 | M&L Rendering 10 mm thick on fair faces of brick work or concrete surfaces with CM 1:6 on internal walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 43 | Material & labour for Rendering 15 mm thick on brick or concrete surfacesin CM 1:4using water proofing liquid compound as per manufacturer instructions, and finished fair and even complete all specified and directed.(WPC shall be measured and paid separately.) |
| 44 | Supply only liquid water proofing compound complete all as specified and directed. |
| 45 | M&L Rendering 5 mm thick on fair faces of brick work or concrete surfaces with CM 1:3 on ceiling surfaces finished even and smooth (without using extra cement) complete all as specified and directed. |
| 46 | Preparation of new plasteredsurfaces of walls and applying twocoat of cement base paintover a coat of Chalk whiting all as specified and directed. |
| 47 | M & L for prepartion of new plastered surface of wall and applying two coats of oil bound distemper over a coat of Primer over a coats of wall care putty complete all as specified and directed. |
| 48 | M & L forpreparation of new plastered surfaces of wall and applying three coats of white wash complete all as specified and directed |
| 49 | M&L for applying three coats of white wash on undecorated ceiling surfaces complete all as specified and directed. |
| 50 | S&F GI tubing 15 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection complete all as specified |
| 51 | Supply & fix GI tubing 20 mm bore medium grade with all fittings and fixed to wall including taking up or down steel tubing and connection andcomplete all as specified |
| 52 | Supply & fixed in repairs vitreous china wash down water closet (pedestal pattern) \"P\" or \"S\" trap including jointing including plastic water closet seat cover, closed pattern with flat bottom and cover and mild steel CP or aluminimised hinging device,complete all as specified and directed. |
| 53 | S & F in repairsvitreous china white squatting pan \"Orissa Pattern\" size 580x440mm, with integrated foot rest (excludingflushing sistern, flush pipe etc) including making good to floor complete, all as specified and directed. |
| 54 | S & F 32 mm dia PVC waste pipe fixed in repairs complete all as specified and as directed. |
| 55 | S&f in repair Vitreous China wash basin, white,with padestal flat back, size 540x400mm excluding ditto but including brackets and padestal etc all as specified and directed. |
| 56 | S & F in repairs 10 ltr cap PVC valve less symphonic action type flushing cistern low level, white with inlet ball valve float and handle including bracket etc complete all as specified. Make : Prayag Cat No 501 or equivalent |
| 57 | S&F in repair bib tap 15 mm dia cast copper alloy with crutch or butter fly handle screwd for iron pipe or for brass ferrule and fixed complete all as specified |
| 58 | S&F in repair pillar cock swan neck 15 mm bore brass CP screwed for iron pipe including taking down existing one complete all as specified and directed. |
| 59 | Supply and fix Swan neck central hole basin mixer with hot/cold connection without pop up waste systemcomplete all as specified and directed. |
| 60 | S&F in repairPillar taps, cast copper alloy, with capstan heads,chromium plated, screwed down high pressure, with or without lettered \"Hot\" or \"Cold\" with long screwedshanks and fly-nuts,fancy type screwed for iron pipe and fixed, complete all as specified and directed. |
| 61 | S & F in repairs chromium plated shower rose with or without swivel joints of 125mm dia incl fixing to 15 mm bore of pipe complete. |
| 62 | S&F in repair wall mixer, 3 in 1 system with provision for both hand shower and overhead shower complete with 115mm long bend pipe connecting legs & wall flange including showers both hand and over head,complete all as specified and directed. |
| 63 | S & F in repair PVC connection 15 mm dia, 450 mm long including PTMT check nut complete |
| 64 | S&F in repairsstop valve/angle cock 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type. |
| 65 | S&F in repairs2-way bib cock with flange 15 mm dia cast copper alloy high pressure with crutch or butter fly handle screwd for iron pipe or union and fixed. Chromium plated fancy type, complete all as specified and directed. |
| 66 | S & F in repair health faucet of 15 mm bore brass cromium plated including PVC pipe to connection GI tubing 15 mm boreall completeall as specified and directed. |
| 67 | S & F in repair jet spray (butterfly) with 1.5 mtrs tube with complete all accessories |
| 68 | S &F Tubular towel rail, 20mm dia, D type, 60cm long between flanges of brass Chromium plated fixed with and including Chromium plated brass screws and wooden/plastic cleats complete all as specifed and directed. |
| 69 | S&F in repairs towel rack complete all as specidied and directed. |
| 70 | S&F in repair PVC (SWR) gully trap 125/110 mm , setting and jointing with solvent cement complete all as specified and directed. |
| 71 | S&F as in repair stainless steel kitchen plate rack of size 80x55x20 cm of minimum thickness 0.8mmincluding necessary drilling, fixing with screw, plugs in kitchen etc complete all as specified and directed. |
| 72 | S & F waste fitting, 32 mm/40mmbrass, chromium plated forsink, basin, etc with long screwd shank and fly nut compete. |
| 73 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan-necks, etc., including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fitting and accessories) |
| 74 | M&L for 75mm PVC (SWR) floor trap, plain with grating including jointing with solventcement complete all as specified and directed. |
| 75 | S & F in repair 110 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 76 | S&F in repair CP grating doom with waste hole of size 125mm dia complete all as specifed and directed complete all as specifed and directed. |
| 77 | S & F in repair 75 mm bore PVC (SWR) pipe, single socketed in any length with rubber ring joints, fixed to walls/floor with stack clamp every one mtr apart complete all as specified and as directed. |
| 78 | S&F in repair PVC (SWR) Bends any radius for 110 mm bore complete all as specified and directed |
| 79 | S&F in repair PVC (SWR) Bends any radius for 75 mm bore complete all as specified and directed |
| 80 | S&F in repair PVC (SWR) vent cowl 110mm bore complete all as specified and directed |
| 81 | Dismantlingwater tank of capacity exc 250 ltr & not exc 500 ltrs and removing to store of any description complete all as specified and directed |
| 82 | Dismantlingwater tank of capacity exc 500 ltr & not exc 1000 ltrs and removing to store of any description complete all as specified and directed |
| 83 | S & F 500 ltrs capacity Rotational moulded multi layerpolyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 84 | S & F 1000 ltrs capacity Rotational moulded multi layerpolyethylene water storage tanks (Cylindrical vertical with closed top) hoisted and fixed in including 20mm bore PTMT float valve position including connections complete all as specified and directed. |
| 85 | S&Fin repair 15 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 15mm-142 gms/20mm-210g complete all as specified and directed.) |
| 86 | S&Fin repair 20 mm bore ball valves. high pressure of PTMT with apoxy coated aluminum rod & heigh dencity plastic ball screwed for iron pipe and fixed. (Minum wt 20mm-210g complete all as specified and directed. |
| 87 | M & L Gun-metal, globe or gate valves, 20mm bore with iron wheel head, screwed both ends for iron pipe and fixed as specified and directed. |
| 88 | S&F in repairs cabinet mirror 400x 500 mm for bathrooms complete all as specified and directed. |
| 89 | S&F in repairs Sheet glass shelf assembly consisting of 5.5mm thick sheet glass shelf 12cm wide with CP bracket guard & railing 60cm long |
| 90 | S&F in repair corner sheet glass shelf assemble consisting of 5.5mm thick sheet glass shelf with chromium plated bracket guard and railing complete all as specified and directed. |
| 91 | S&F in repairs CP soap dish with glass complete all accessories complete all as specified and directed. |
| 92 | S&F in repairs 600mmx450mm bevelled edge mirror of selected quality glass, mounted on 6mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed. |
| 93 | M & L for PCC 1:2:4, Type B0 (using 12.5 mm graded stone aggregate) 25 mm thick as in sunken floor complete all as specified and directed. |
| 94 | M&L for PCC type E2 1:5:10 (40 mm graded aggreate) in foundation, filling and mass concrete complete all as specified and directed |
| 95 | Supplying and applying two component elastomeric acrylic polymer modified cementitious waterproofing coating, SmartCare Damp Block 2K Supremo or approved equivalent, having 80% elongation as per ASTM D412, resisting 5 bars hyrostatic pressure as per DIN 1048, reduction to rapid chloride shall be 70 as per ASTM C 1202, crack bridging upto 1.2mm as per ASTM 4548.5. The coating shall have food grade certificate from laboratories like CFTRI. applying SmartCare Damp Block 2K Suprema in two coat 2 kg/sqmt consumption, The mixing ratio of the coating shall be 2 parts of powder & 1 part of liquid without any water addition in the mixing , etc, complete as per manufacturers specifications. |
| 96 | S & F in repair 100 mm long SS butt hinges and fixed with screw/welded to frames etc all as specified and as directed by EIC |
| 97 | Dismantling boarding, any description, fixed in any position with Screw ,complete all as specified and directed. |
| 98 | S& F in repair 18 mm thick Alstone wood Polymer ComposiveBoard ( WPC) in cupboard shutter and like with decorative on both side design fixedby drilling screws and brackets all as specified all as directed. |
| 99 | S&F 12 mm thick Particle board, medium density, flat pressed, single layer type or three layer type with BWR type adhesive fixed in Aluminium doors, cabinet self,etc complete all as specified and as directed . |
| 100 | S&F in repair Continuous (piano) hinges, SS, bright finish with 30 mm width of flaps (When open), complete all as specified and directed. |
| 101 | S&F magnetic catcher of size 20mmx50mm suitable for cup board shutters complete all as specified and as directed. |
| 102 | Supply only Liquid water proofing compound of approved make |
| 103 | M&L 50mm bore GI tubing medium grade laidon sunken floor as on Spot Pipe complete all as specified and directed. |
| 104 | S&F in repair for curtain rails, mild steel, chromium plated with fixing brackets,stops,rollers etc complete all as specified and directed. |
| 105 | Dismantling of asbestos cement sheet (corrugated, semi-corrugated etc) sheets in roof coverings complete all as specified and directed. |
| 106 | M & L for 0.50 mm thick prepainted galvalume aluminium zinc coating G.I. based corrugated steel sheet(AZ150) of any colour having tensile strength of 550 MPA as in roof covering, fixed with and including self tapping screw/J-type bolt/L-type boltcomplete all as per manufacturer instructions. |
| 107 | M & L Pre-painted galvalume aluminum zinc coating GI based Plain steel sheet 0.50mm thick (AZ150)of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws/J-type bolt/L-type boltas specified |
| 108 | Dismantling of timber fillets,rails, posts, rafters, purlins under 40 Sq cm in section complete all as specifed and directed. |
| 109 | S&F Steel work in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to I. S 1161-1979 grade St.-240 |
| 110 | S&F mild steelwork such as roof trusses (framed), trussed, purlins, and heavy bracket framing (Beam, Tee, angle, Channel or flat section) including distance pieces, cleat etc complete all as specifiedand directed. |
| 111 | Dismantling wall and ceiling boards (fibre, pulp, insulation etc.) or insulation boards/slabs/blankets any thickness and wall paneling including cover fillets,complete all as specified and directed. |
| 112 | M&L for 4mm thick Non Asbestos, fibre cement building board of size 595x595mm size in ceiling fixed or laid/ inserted including GI powder coated snap grid framework for false ceiling comprising of the following section for making partition of 600x600 mm size fixed to wall with rawl plug and screw and hanged to roof with 4 mm dia GI suspended wire of suitable length and butterfly clip of size of main Tee shall be 32mmx15mmx0.30mm, cross tee shall be 32mmx15mmx0.30mm thick with black lining in mid portion and wall angle shall be 24mmx24mmx0.30mm thick complete all as specified and directed |
| 113 | S & F Solid PVC wall lining consisting of 5 mm thcik plain/wood grain printed colour PVC sheet inclusive cement and fixing at ste on PVC frame as per specified and drgs. |
| 114 | S & F 5mm thick PVC sheet fillet of width 35mm for wall paneling inclusive offixing on to wall to make PVC Frame asper specification and drawing. |
| 115 | Taking down point wiring with aluminum conductor cable of light point fan & socket light & power complete including light fittings any type switches, sockets, ceiling rose, switch boards, bell/buzzer, bell push, tube light fitting, regulator etc, and making good to the disturbed surfaces of walls/ floor etc to match with existing surfaces including white washing/colour washing/ distemper to match with existing wall/floor/ceiling finishes. |
| 116 | Taking down sheet metal enclosure DB, MCB, main switch etc and making good disturbed surfaces to match with existing surfaces. |
| 117 | Taking down sub main wiring of any size/ capacity complete all as specified and making good disturbed surfaces to match with the existing surfaces. |
| 118 | M&L point wiring 1100 volt grade single core FRLSH PVC insulated and unsheathed cable with multistranded copper conductor 1.50 sqmm drawn in and including electrical grade PVC conduit not less than 20mm dia with IS 9537 (Part-III) 1983 marked medium grade concealed in wall/ceiling orsurface of wall/ceiling as directed including FRLSH PVC insulated unsheathed earth wire with multistranded copper conductor of size 1.50 sqmm pressed steel modular boxessunk on wall for mounting of modular switches, switch sockets, fan regulator etc including modular coverwith frame any size complete all as specified and making good disturbed surfaces for one light point controlled by one, one way switch. Note :- Cost of cable provided from sub main DB to respective switch board in rooms shall be included in the quoted point wiring rate.All switches, fan, sockets, ceiling roses and holders shall be connected to common earth dolly. |
| 119 | As per item No 121 above but One ceiling /exhaust fan point controlled by one switch and regulator |
| 120 | As per item No 121 abovebut One 3 pin 5 amp socket out point on the same board with other switches. |
| 121 | As per item No 121 above but One 3 pin 5 amps socket out let point on independent board but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmm |
| 122 | As per item No 121 abovebut One bell/buzzer point controlled by one bell push. |
| 123 | All as per item Sl No 121here in before but wiring with 2.5 sqmm multi stranded cable and earth wire with copper conductor of size 2.5 sqmmfor 15 amps power point. |
| 124 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x1.5 Sqmm with earth wire of 1x1.5 Sqmm.Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. |
| 125 | M&L for sub main wiring with two single core PVC FR LSH insulated unsheathed stranded copper conductor and earth wire 1100 volt grade and drawing into PVC conduit not less than 20 mm medium grade concealed inwall of the following sizes :- 2x2.5 Sqmm with earth wire of 1x2.5 Sqmm.Note :- Accessories for point/sub main wiring like PVC junction box, bend, Tee, elbow shall be of same make. |
| 126 | As per item No 125 abovebut 2x4.0 Sqmm with earth wire of 1x4.0 Sqmm. |
| 127 | As per item No 125 above but 2x 6.0 Sqmm with earth wire of 1x6.0 Sqmm. |
| 128 | Supply and fix ceiling rose surface type 2/3 terminal 5 amps Make : Havells, Legrand, Crabtree |
| 129 | S&F Bell ding dong,AC 230 volts, single phase |
| 130 | Supply and fix lamp holder insulated body with back plate for angle/ batten fitting. |
| 131 | Supply and fix Modular switch one way 6A, 1 module Make : Havells, Legrand, Crabtree |
| 132 | Supply and fix Modular switch one way 16A, 1 module Make : Havells, Legrand, Crabtree |
| 133 | Supply and fix Modular bell push 6A, 1 module Make :Havells, Legrand, Crabtree |
| 134 | Supply and fix Modular Socket 6A 2/3 pin combined 2 module Make : Havells, Legrand, Crabtree |
| 135 | Supply & Fix Modular Socket 6A/ 16A2/3 pin combined 2 module Make : Havells, Legrand, Crabtree |
| 136 | Supply and fix Modular Fan step regulator,120 watt 2 module Make : Havells, Legrand, Crabtree |
| 137 | Supply and fix piano type switch one way 6A,Make : Anchor Roma, Legrand, Crabtree |
| 138 | Supply and fix piano typeswitch one way 16A, 230 V as per sample complete |
| 139 | Supply and fix piano type bell push 6A, single phase as per sample complete |
| 140 | Supply and fixflush type Socket 6A 2/3 pin combined single phase as per sample complete |
| 141 | Supply & Fix flush type Socket 6A/ 16A5 pin combined single phase as per sample complete |
| 142 | Supply and fixflush typeFan step regulator,120 watt switch/socket type as per sample complete |
| 143 | Supply & Fix modular motor starter 20A , 2 module for AC complete all as specified and directed. |
| 144 | Supply and Fix Highly durable surface mounted 18/20 watts LED batten/surface constructed of fire retardant engineering grade extruded aluminium body 100 lumen per watt, min 2000 lumen and decorative end cap complete with driver including 3 core 1.0 sqmm copper conductor cable for connection and accessories all as specified and directed Make :- Bajaj/ Syska/ Wipro/ Jaquar. |
| 145 | Supply & fixlight fitting 9W bulk head luminaries with lamp holders etc complete with all accessories and including connecting up with twin core twisted flexible cable suitable size of 230V, 50HZ complete all as directed by the Engineer-in-Charge.Make: Bajaj/ Syska/ Wipro/ Jaquar. |
| 146 | Supply & fixfittings with surface mount LEDdown lighters 12 W including driver withrated voltage240 V , 50 Hz, complete all as directed by the Engineer-in-Charge. Make: Bajaj/ Syska/ Wipro/ Jaquar. |
| 147 | Supply and fixEnergy efficient surface mounted 2\"X2\" grid Ceiling LED fitting 36/40 W rated voltage 240 V, 50Hz combination with profiled and flat diffuse complete all as directed by the Engineer-in-Charge. Make : Bajaj/ Syska/ Wipro/ Jaquar. |
| 148 | Supply and fix LED baton fitting 2\" length including drivershaving energy consumption, 10/11W,230 V ,50Hz, 6500K, not less than 800 lumen prewired, complete all as directed by the Engineer-in-Charge. Make : Bajaj/ Syska/ Wipro/ Jaquar. |
| 149 | S&F LED strip 5m long 25W 240V 50Hz with drivers and fixing arrangement complete all as specified and directed. Make: Bajaj/ CromptonOrient/ Wipro/ Jaquar. |
| 150 | Supply and fix building security lightLED25 W with Lumen O/P 1800 with driver withrated voltage 240 V, 50Hz,including mounting GI (made out of 25 mm dia light grade pipe 0.8 m bent two shape including FI clamps nut bolts etc complete all as directed by the Engineer-in-Charge.Make : Bajaj/ crompton/Phuilips |
| 151 | M&L for cutting & taking out the existing surface / sunken box / switch plate with switches / sockets and replacing with the following items complete all as specified and directed for: Modular metal flush box with modular cover plate with frame 3 module. Note:- The disturbed surfaces of wall for concealing box wiring shall be made good by applying cement plaster, putty and colour wash etc matching with the existing surfaces. The rate shall be deemed to include the cost of making good. Switches, sockets, regulators etc to be measured and paid separately. |
| 152 | All as per item no 151 but Modular metal flush box with modular cover plate with frame 4 module. |
| 153 | All as per item no 151 but Modular metal flush box with modular cover plate with frame 6 module. |
| 154 | All as per item no 151 but Modular metal flush box with modular cover plate with frame 8 module. |
| 155 | All as per item no 151 but Modular metal flush box with modular cover plate with frame 12 module. |
| 156 | Supply and fix sheet metal enclosure single pole & neutral for 240 volts 4/6 way with 200 Amp rated bus bar flush /surface mounting double door, complete all as directed by the Engineer-in-Charge.Make-Legrand/ L&T/ Havells. |
| 157 | Supply and fixsheet metal enclosure single pole & neutral for 240 volts 8 way with 200 Amp rated bus bar flush /surface mounting double door. complete all as directed by the Engineer-in-Charge. MakeLegrand/ L&T/ Havells. |
| 158 | Supply and fixsheet metal enclosure triple pole & neutral for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door.Make-Legrand/ L&T/ Havells. |
| 159 | Supply and fixsheet metal enclosure vertical triple pole & neutral(VTPN) with MCCB 63 amps for 415 volts 4 way with 200 Amp rated bus bar flush /surface mounting double door.Make-Legrand/ L&T/ Havells. |
| 160 | Supply and fixMCB single pole 240 volt 6 to 40 amps 10 KA breaking capacity, \"C\" series complete all as directed by the Engineer-in-Charge. Make-Legrand/ L&T/ Havells. |
| 161 | Supply and fixMCB single pole and neutral240 volt 6 to40 amps 10 KA breaking capacity, \"C\" series, complete all as directed by the Engineer-in-Charge. MakeLegrand/ L&T/ Havells. |
| 162 | Supply and fixMCB triple pole and neutral 415 volt 40 to 60 amps 10 KA. MakeLegrand/ L&T/ Havells. |
| 163 | Earthing complete with galvanized street earth plate electrode 600x600x6mm thick buried directly in ground (earth plate not less than 2.25mtr deep below normal ground level) with top edge of the plate not less then 1.50 mtr.below the normal ground level connected to galvanized earth lead wire 4.00 mm dia by means of bolts nuts check nuts & washer of galvanized iron or steel all as shown in electrical plate No 5 connected to earthing test point all as specified and testing on completion including the material and labour for :-(a) Excavation and earth work or drilling hole for electrode in any type of soil (b)PCC pit in cement concrete 1:2:4 TYPE B-1 (.c)Pre cast RCC cover with suitable handle 40mm thick in PCC 1:2:4 reinforced with welded steel wire fabric weighting not less than 1.87 Kg/sqmm (d)Funnel with watering pipe of GI 20mm nominal bore medium grade and Aluminum lugs etc all as specified.(e)15mm nominal bore medium grade GI protection pipe up to 7.50 meter long for protection of earthing lead.(f)Requisite quantity of charcoal and common salt (g) Connection to earthing test point and testing on completion. |
| 164 | NOTE:- SCHEDULE OF CREDIT (Amount shall be deducted offline from the total quoted amount to workout the net contract sum to be considered for acceptance.)[(-) Rs. 109328.00] |
