|
| 1 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) complete all as specified and directed.Notes:-Demolished material should be thrown out of the defence line including loading,transportation,unloading of debris at govt approved dumping area also no extra cost shall be paid to the contractor by department. |
| 2 | M&L for modular kitchen having steel cabinet box and shutter including below mentioned item as per drawing attached. Boxes mentioned in drawing 1. Hinges soft close- Hettich2. Drawers- Pans & Backers3. Dishrack - Sleek 4. Cutlery - Hettich5. Handless profile. - Hettich 6.Glass profile - Hettich 7.LEGS PVC 100mm- WUDNOX8.Skirting 100mm - REHAU 9. Blind hinge - Hettich10.Plate organiser - Hettich 11. Dustbin holder -Hettich12. Detergent holder - Sleek 13. Antiskid Matt - Sleek14. Galvenized - AM / NS steel15. Glass - Black Glass 16.Stainless steel Sink45\" Two Bowl17.WPC sheet 19mm below Granite includedShutter - PU finishes Matt and glossy (Size of boxes)Two pan Drawer 700 mm x 720 mm ,three pan Drawer 700mm x 720 mm,Cylinder Box 500mm x 720 mm Single shelf unit 950mm x 720mm,Sink unit 1200 mmx 720 mm ,Single shelf unit 850mm x 720 mm Two Pan drawer 850mm x 720 mm Top Boxes Single shelf unit 650mm x 720 mm,Single shelf unit 900 mm x 720 mm,Dishrack unit 900mm x 720 mm ,Ro unit 500 mm x 720 mm,Single shelf unit 650mm x 720 mm,Single shelf unit 450 mm x 720 mm,Single shelf unit 450 mm x 720 mm,Steel shutter unit 450 mm x 720 mm including all fixing material like screws,hydraulic hinges etc as per requirement of work also design,pattern and colour of modular kitchen will be approved by GE.Complete all as specified and directed by Engineer-in- Charge. |
| 3 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing serviceable tiles to store and rubbish off the premisesetc complete all as specified and directedNotes:-Dismantled material should be thrown out of the defence line at govt approved dumping area. |
| 4 | M&L for colored non skid ceramic tiles7to 8 mmthick, area of each tileexc 0.11 sqm but n exc 0.18 sqm in floors etcset and jointed in neat cement slurry and pointed in coloured cementover and including 15 mm thick screed bed orbedding layers of cement mortar 1:4 (including hacking of floors) to matchshade, pattern, laying etc of tiles as directed at site complete all as specified and directed. |
| 5 | M&L for 300x450 x7 mm thick glazed ceramic tiles of premium quality as in dado/skirting and vertical surfaces set&jointedin neat cement slurry and pointed in colored cement over and including10 mm thick cement mortar 1:4 to match theshade, pattern, laying at site complete all as specified and directed by Engr-in-Charge. |
| 6 | M&L for pre- polished granite slab machine cut of any shade as approved by GE of 20 mm thick including over cement screed bed including edge moulding to shape cutting and nosing with suitable hole for cylinder gas pipe, kitchen sink ,WHB, grinding and machinepolishing to edge to give high gloss finish (Granite finish) with suitable grinding stones and set in screed bed 15mm thick CM 1:4 in single piece for platform complete all as specified and as directed by Engr-in-Charge. |
| 7 | Taking down cement plaster in any thickness including racking out joint hacking for key scrubing down with water etc complete all as specified. |
| 8 | Material and labour for 15 mm rendering in CM 1:6 on fair face of wall or on concrete surfaces finished even and smooth without using extra cement complete all as specified as directed by Engineer-in-Charge. |
| 9 | Taking up or down steel tubing for 15mm dia pipe and connections complete all as specified and directed by Engr-in-Charge |
| 10 | S&F 15mm dia CPVC pipes SDR 11 & Plain CPVC SDR 11 fittings. (ISI marked) such as brass elbows, bends tees, nipples, union sockets, sockets etc and short pieces and fixed complete to walls and ceilings or laid in floorscomplete all as specified |
| 11 | Cutting chases,pinning for concealed water tubing andmaking good to facing where required and pointing in cement mortar 1;3 ,cutting n exc 10cm girth all as specified and as directed by Engineer-in -Charge. |
| 12 | S&Fin repair 15mm diabib taps long body fancy type,chromium plated(CP) with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed complete all as specified and directed.CERA Cat Part No G1018152,Jaquar Cat Part No DRC-37037,Kohler Cat Part No 16093IN-4-CP |
| 13 | S&F in repair sink mixer with regular swinging spout (wall mounted model) with connecting legs & wall flanges fancy type CP screwed down high pressure with or without lettered hot and cold with long screwed shanks and fly nut screwed for Iron pipe and fixed 15mm dia.complete all as specified and directed.Jaquar Cat Part No DRC-37309,Cera cat Part No F1018501GG,Kohlar Cat Part No 20591 IN-4-CP |
| 14 | M&L for PVC waste pipe 32 mm dia flexible with cup to fit wash hand basin waste coupling complete all as specified and directed. |
| 15 | S&F in repair CP grating 125mm dia as suitable to existing trap as per requirement complete all as specified and directed by Engr-in-Charge |
| 16 | M&L for preparation of newly plastered surfaces of walls,applying two coats of distemper with oil emulsion over a coat of primer over a thin layer of wall care putty including necessary formwork scaffolding required upto the 4th story complete all as specified and as directed. |
| 17 | Point wiring for one lightpoint/ fan point controlled by one switch with 1.5 sqmm FRLS PVC insulated unsheathed copper conductor single core multi strand flexible cable and 1.5 Sqmm FRLS PVC insulated unsheathed copper conductor single core cable (green colour) as earth lead in and including concealed non metallic rigid PVC conduit heavy grade withall fittings ( ISI marked ) controlled by one switch including CI/MS modular sunk box required size & as directed by Engr-in-Charge incl mudular sheet cover, including cutting chases to wall and making good the disturbed surfaces to match with the existingspecification complete all as specified and directed. |
| 18 | One 3 pin socket outlet point 5 Amps on independent, with cablessize of 2.5 sqmm |
| 19 | One 3 pin socket outlet point 15 Amps on independent, with cables size of 2.5 sqmm |
| 20 | S&F Socket outlet flush universal modular (piano) type 6 pin 6/16 Ampswith suitable plate and cover including taking dwon old sockets and refixing with modular new sockets and connect to existing wire complete all as specified and directed. |
| 21 | S&F Socket outlet flush modular (piano) type 5 pin 6 Ampswith suitable plate and cover including taking dwon old sockets and refixing with modular new sockets and connect to existing wire complete all as specified and directed. |
| 22 | S&F Switch Modular (piano) flush button single pole one way 16 ampswith suitable plate and cover including taking dwon old sockets and refixing with modular new switches and connect to existing wire complete all as specified and directed. |
| 23 | S&F Switch Modular (piano) flush button single pole one way 6 amps 1 module with suitable plate and cover including taking dwon old sockets and refixing with modular new switches and connect to existing wire complete all as specified and directed. |
| 24 | Supply and fixing 3 way modular sunken box (ISI Marked) including taking down old unserviceable box and refixing with new modular box fitting and fixtures (switch, sockets) etc complete all as specified and as directed. |
| 25 | Taking down carefully exhaust fan any make any size disconneting wire and remove blade carefully complete including fixture and fitting and deposited to MES store,including filling of hole in wall with brick work complete with plaster from both sides of wall and making good with wall putty and two coats of distemper complete all as specified directed by Engr-in-Charge. |
| 26 | Supply fixing and testing 230 volts modular kitchen chimney suitable to be fixed to any rigid vertical/surface over the cooking area in the kitchen, including bricks wall demolation and making a hole and fixing of duct andrepair of wall with complete masson work, inclusive of the following components :-(a)The canopy of the hood and the front panel is made out of high quality heat resistant and tempered glass, size 60x60cm the body of the hood house motor, blower, lamps filter and control switches.(b)Reduction flange, which also acts as a uni-directional butterfly valve to prevent cockroaches or rats from entering into the hood area when the hood is not in use. It permits the smoke to go out of the hood.(c)The U shaped section is made of high quality mirror polished stainless steel (fitted along with the hood) for covering the housing and the suction.(d)Wall bracket to fix the hood with screws and rawl plugs.(e)Flexible and expandable aluminium hose to connect the hood to the outlet to the outlet of the kitchen. |
| 27 | Supply and fix wall mounted fan complete with blades, hanging accessories, pull chain control and accessories,1350rpm,230V, 400mm size sweep min air delivery 72Cmm air delivery complete all as specified and directed. |
| 28 | SCHEDULE \"A\" PART-II (Schedule of credit) Credit amount of Rs (Refer schedule of credit) for retrieved material mentioned in Sch \"A\" Part-II of Tender documents in PDF form will be deducted offline during acceptance of tender of lowest bidder. |
