}

Tender For Creation Of Open Air Butterfly Garden At Zoological Garden Alipore, Kolkata-West Bengal

West Bengal Zoo Authority has published Tender For Creation Of Open Air Butterfly Garden At Zoological Garden Alipore. Submission Date for this Tender is 06-05-2025. Gardening Tenders in Kolkata West Bengal. Bidders can get complete Tender details and download the document.




Tender Notice

48913224
Tender For Creation Of Open Air Butterfly Garden At Zoological Garden Alipore
Open Tender
NCB
West Bengal
Kolkata
06-05-2025

Tender Documents

Tender Details

Tender For Creation Of Open Air Butterfly Garden At Zoological Garden Alipore- 1 P-1,It- 2(a)Earth work in excavation of foundation trenches or drains, in all sorts of soil (including mixed soil but excluding laterite or sandstone) including removing, spreading or stacking the spoils within a lead of 75 m. as directed. The item includes necessary trimming the sides of trenches, levelling, dressing and ramming the bottom, bailing out water as required complete.(a) Depth of excavation not exceeding 1,500 mm. 2 P-14,It. 1Single Brick Flat Soling of picked jhama bricks includingramming and dressing bed to proper level and filling joints with local sand. 3 P-24,It. 4Ordinary Cement concrete (mix 1:2:4) with graded stone chips (20 mm nominal size) excluding shuttering and reinforcement,if any, in ground floor as per relevant IS codes. a) Pakur Variety 4 P-1,It- 3Earth work in filling in foundation trenches or plinth with good earth, in layers not exceeding 150 mm. including watering and ramming etc. layer by layer complete. (Payment to be made on the basis of measurement of finished quantity of work) (a) With earth obtained from excavation of foundation. 5 P - 15/ it-8,Brick work with 1st class bricks in cement mortar (1:6)(a) In ground floor 6 P - 16/it-16 125 mm. thick brick work with 1st class bricks in cement mortar (1:4)(a) In ground floor 7 P - 189/ It-1(i-b,c)Plaster (to wall, floor, ceiling etc.) with sand and cement mortar including rounding off or chamfering corners as directed and raking out joints including throating, nosing and drip course, scaffolding/staging where necessary (Ground floor).[Excluding cost of chipping over concrete surface] (b) 20mm thick plaster (1:6 cement sand morter) external plaster(a) In ground floor 8 P-196, It-8Applying Exterior grade Acrylic primer of approved quality and brandon plastered or cencrete surface old or new surface to receive decorative textured (matt finish) or smooth finish acrylic exterior emulsion paint including scraping and preparing the surface throughly, complete as per manufacturers specification and as per direction of the EIC. In Ground Floor: Two Coat 9 P-197, It-16Protective and Decorative Acrylic exterior emulsion paint of approvedquality, as per manufacturers specification and as per direction ofEngineer-in-Charge to be applied over acrylic primer as required. Therate includes cost of material, labour, scaffolding and all incidentalcharges but excluding the cost of primer. In Ground floor (Two Coat) b) Premium 100% Acrylic Emulsion 10 P-99, It-1M.S. structural works in columns, beams etc. with simple rolled structural members (e.g. joists, angle, channel sections conforming to IS: 226, IS: 808 & SP (6)- 1964 connected to one another withbracket, gussets, cleats as per design, direction of Engineer-incharge complete including cutting to requisite shape and length,fabrication with necessary bolting, metal arc welding conforming toIS: 816- 1969 & IS: 1995 using electrodes of approved make and brand conforming to IS:814- 2004, haulage, hoisting and erectionall complete. The rate includes the cost of rolled steel section, consumables such as electrodes, gas and hire charge of all tools and plants and labour required for the work including all incidental chages such as electricity charges, labour insurance charges etc.I) For structural members of specified sections weighing less than 22.5 Kg./m 11 P-200, It-1(a)(a) Priming one coat on steel or other metal surface with synthetic oil bound primer of approved quality including smoothening surfaces by sand papering etc. 12 P-200, I-2(A-b-iv)(A) Painting with best quality synthetic enamel paint of approved make and brand including smoothening surface by sand papering etc. including using of approved putty etc. on the surface, if necessary : (b) On steel or other metal surface : With super gloss (hi-gloss) -(iv) Two coats (with any shade except white) 13 P - 83 It - 17(C)Supplying, fitting & fixing Industrial Troughed Aluminium sheet (excluding the supporting frame work) of approved make & brand in alloy 3105 conforming to IS: 1254-1991 fitted and fixed with 75 mm & 25 mm Self tapping screw ,EPDM Washer 16 mm dia & 3 mm th washer etc complete with 150 mm. end lap and one corrugation minimum side lap.(Payment to be made on area of finished work) (Aluminium sheet to be supplied by contractor).b) With 0.71 mm thick sheet 14 P-222, It-11 (VI)Supplying, fitting, fixing, Chain link fencing of approved quality with R.C.C posts wooden posts or iron posts by means of galvanised C clips to grid of horizontal strands of galvanised high tensile spring steel wire of 12 S.W.G which have to be tensioned and fixed to the vertical posts by means of galvanised special clips, bolts and nuts etc.(VII) 25 mm. x 25 mm. x 12 g. 15 Page:74, Item:47Supplying& laying 20 mm designer chequered tiles of any shade and of approved quality as per IS: 1237: 1980 laid in patterns as directed in pavement, footpath including necessary underlay 25 mm thick average cement mortar (1:3) complete in all respect with all labour and materials [using cement slurry @ 4.4 kg/Sq.m at back side of tiles. Cement of mortar & slurry will be supplied by the Department. Border concrete if necessary to be paid separately]. 16 P-104, It-12M.S. works in framed gratings of window etc.made of round orsquare bars and frame work or M.S. flats (with the bars securelyfixed to the flat bar frame) with or without intermediate flat barstiffener and fixed with necessary screws etc. complete, as directed 17 NON-SCHEDULE ITEM Supplying and Plantation of different plantsfor butterfly Garden forLand Preparation for Leveling and creation of slope, Preparing pocket routes ( types of plants Lantana camara – Lantana, Adeniumobesum – Desert Rose, Citrus × limon – Nimbu, Lemon, Celosia argentea – Silver Cockscomb, Carissa carandas – Karonda, Holarrhenaantidysenterica– Kutaja, Cratevareligiosa – Sacred Garlic Pear , Calotropisgigantea – Crown Flower , Murrayakoenigii – Curry Leaf, Anacardiumoccidentale – Cashew, Oxystelmaesculentum – Rosy Milkweed Vine, Cadabafruticosa – Indian Cadaba, Maeruaoblongifolia – Desert Caper, Asclepiascurassavica – Scarlet Milkweed, Cappariszeylanica – Ceylon Caper, Cleome rutidosperma – Fringed Spider Flower, Schleicheraoleosa – Kusum, Litchi chinensis – Lychee, Phyla nodiflora – Frog Fruit , Heliotropiumindicum , Tribulusterrestris – Gokharu, Puncture Vine, Caltrop ,) as per directed 18 ADD GST 18% on Total cost of works 19 Add @ 1 % For labour welfare cess

Key Value

Document Fees
Refer document
EMD
INR 9883.0 /-
Tender Value
INR 4.94 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail