Tender For Repair/Maintenance Of Wooden Furniture At Md Accn At Rms., rangapahar-Nagaland

Tender For Repair/Maintenance Of Wooden Furniture At Md Accn At Rms.; 1 Sofa set five and four seater(FD-281)- (Qty 35 & 04 Set)Taking out old unsv components of Sofa set five & four seater and S& F new components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-Charge :- 2 New Seat Rails Right and leftof Sofa set (Single Seater) 3 New Seat Rails Front and Back of Sofa set (Single Seater) 4 NewRails of back frame Top and bottom of Sofa set (Single Seater) 5 New Back and bottom support of Sofa set (Single Seater) 6 New long rails of seat front and back of Sofa set (Three Seater) 7 New long rails of Back frame Top and bottom of Sofa set (Three Seater) 8 New long Back and bottom support of Sofa set (Three Seater) 9 New Arms of Sofa set. 10 New bearers of seat and back rest of Sofa set. 11 Taking out old unsv foam cushion and S & F new cool foam cushion 32 Kg/cum density of make Sleepwell/Kurlon of size 580x560x100mmand superior quality tapestry cloth cover duly stitched at one end with openable zip and other making good shape (Tapestry cloth not less than Rs.295/- per mtr) colour & pattern as approved. 12 M & L for applying two coats of polish for internal and external surfaces to the Sofa Set 5 seater including cleaning and preparing the old surfaces. 13 M & L for applying two coats of polish for internal and external surfaces to the Sofa Set 4 seater including cleaning and preparing the old surfaces. 14 Supply only new tapestry cloth cover duly stitched at one end and at other end with openable zip and to fit for sofa cushion 580x560x100mm (Tapestry cloth not less than Rs.295/- per mtr) colour and pattern as approved. 15 Chair writing(FD/E6/MAP/12)- (Qty 100 Nos)Taking out old unsv components of Chair writing and S & F new Components as per shape and size as existing complete all as specified and shown on drawing and as directed by Engr-in-charge :- 16 Cushion seat alongwith approved coloured fabric. 17 Cushion back alongwith approved coloured fabric. 18 Supply and fixing new tapestry cloth cover of seat or back with PVC edging duly stitched (Tapestry cloth not less than Rs.295/- per mtr) colour and pattern as approved. 19 New arms. 20 Taking out cushion seat of chair writing and spot welding to joints of existing MS flat iron of size 25x3mm welded to the bottom frame and refix the removed cushion seat. 21 Hard rubber shoes with appropriate size steel screw 22 Removing of existing paint by scraping with abrasive cloth and painting one coat of synthetic enamel paint black on steel surfaces of chair writing after preparation of surfaces. 23 Table computer(FD/E6/MAP/03)- (Qty 15 Nos)Taking out old unsv components of table computer and S & F new components as per shape and size as existing complete all as specified and shown on drawing and as directed by Engr-in-charge :- 24 New top made out of 18mm thick pre-laminated MDF board. 25 New sides made out of 18mm thick pre-laminated MDF board 26 New sliding key board drawer made out of 18mm thick pre-laminated MDF board including telescopic channels 27 Removing of existing paint by scraping with abrasive cloth and painting one coat of synthetic enamel paint black on steel surfaces of table computer after preparation of surfaces. 28 Table 900 x 600 mm without drawers(FD-284)- (Qty 10 Nos)Taking out old unsv components of Table 900 x 600mm without drawers and S&F new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 29 New Top of size 900x600mm made out of 18mm thick pre-laminated MDF board teak faced& providing teakwood beading 4mm thick all around the top duly polished. 30 New legs 31 New Short Rails 32 New Long Rails 33 New Short Stiffners 34 New Long Stiffners 35 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 36 Computer Chair revolving with arms(FD/E6/MAP/01)- (Qty 15 Nos)Taking out old unsv components of computer chair and S & F new components as per shape and size as existing complete all as specified and shown on drawing and as directed by Engr-in-charge :- 37 New cushion seat alongwith approved coloured fabric 38 New cushion back alongwith approved coloured fabric 39 New arms 40 New twin wheel castors 41 New 5 pronged base 10.5mm dia forged bright zinc plated MS castor pin is of press fitted into each prong for holding the castors including replacement of gas lift of 100mm stroke length and gas pressure of 300n force as existing. 42 Table Writing(FD-275)- (Qty 45 Nos)Taking out old unsv components of Table writing and S & F new components as per shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 43 New Top of size 1145x600mm made out of 18mm thickpre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished. 44 New Legs 45 New Top Rails 46 New Stiffners 47 New Drawers and providing CP knob 40mm 48 New Shutter of cupboard of size 405x335mm made out of 18mm thick pre-laminated MDF board teak faced and providing CP Knobs and piyano hinges for hanging with the table 49 New 6 mm thick commercial plywood on back of cupboards 50 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 51 Table Centre(FD-274)- (Qty 50 Nos)Taking out old unsv components of Table Centre and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 52 New Top of size 450x900mm made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished. 53 New Legs 54 New Long Rails 55 New Short Rails 56 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 57 Table 900 mm x 600 mm with drawers(FD-283)- (Qty 15 Nos)Taking out old unsv components of 900 x 600 mm with drawers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 58 New Top of size 900x600mm made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished. 59 New legs 60 New Short Rail 61 New Long Rails 62 New Short Stiffners 63 New Long Stiffners 64 New Drawers 65 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 66 Table 900 x 900 mm(FD-291)- (Qty 70 Nos)Taking out old unsv components of Table 900 x 900mm and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 67 New Top of size 900x900mm made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished, includig fixing of 8 Nos wooden corners to joining part of rails and legs for each table. 68 New legs 69 New Rails 70 M & L for applyingtwo coats of best quality polish to the table after preparation of old surfaces. 71 Table Dining 6 Pers(FD-273)- (Qty 65 Nos)Taking out old unsv components of Table Dinning 6 pers and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 72 New Top of Size 1500x900mm made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished, includig fixing of 8 Nos wooden corners to joning corner of rails and legs for each table 73 New Legs 74 New Long Rails 75 New Short Rails 76 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 77 Teapoy(FD-278)-(Qty 120 Nos)Taking out old unsv components of Teapoy and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 78 New Top of size 450x600mm made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished. 79 New Legs 80 New Long Rails 81 New Short Rails 82 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 83 Peg table(FD-277)- (Qty 250 Nos)Taking out old unsv components of Peg table and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 84 New Top of Size 450x300mm made out of 18mm thick prelaminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished. 85 New Legs 86 New Long Rails 87 New Short Rails 88 M & L for applyingtwo coats of best quality polish to the table after preparation of old surfaces. 89 Bed Plywood Top(FD-246)- (Qty 120 Nos)Taking out old unsv components of Bed Plywood Top and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 90 New Top of 12 mm thick ply wood commercial BWR grade. 91 New Long Rails. 92 New 4 mm thick plywood one side teak face of size 660 x 900 mm to head board and & providing teakwood beading 4mm thick all around the head board duly polished. 93 New 4 mm thick plywood one side Teak face of size 900 x 300 to foot board & providing teakwood beading 4mm thick all around the foot board duly polished. 94 New legs. 95 New bottom support. 96 M & L for applying two coats of best quality polish to the bed after preparation of old surfaces. 97 Table Dressing Ladies(FD-251)- (Qty 20 Nos)Taking out old unsv components of Table Dressing Ladies and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 98 New looking mirror of size 1220 x 365 mm & 5mm thick. 99 New Frame and back member of the mirror including back side 6 mm thick commercial plywood. 100 New legs 101 New Top of size 900x325mm made of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick on front duly polished. 102 New drawers including CP knob 40mm. 103 New glass panes shutters 5 mm thick alongwith aluminium channel and glass runners. 104 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 105 Table Dressing Gents(FD-230)- (Qty 06 Nos)Taking out old unsv components of Table Dressing Gents and S& F new Components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 106 New looking mirror of size 760 x 380mm & 5mm thick. 107 New Frame & back member of the mirror including back side 6 mm thick commercial plywood. 108 New drawers including CP knob 40mm. 109 New Top made out of 12 mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all on front side duly polished. 110 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 111 Hat Stand with Mirror(FD-233)- (Qty 25 Nos)Taking out old unsv components of Hat Stand and S& F new Components as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 112 New looking mirror of size 300 x 440mm & 5mm thick . 113 New 4 mm thick plywood one side teak faceon front of size 1000 x 710 mm& New Teak wood edging of size 6 x 35 mm all around the hat stand duly polished. 114 New Aluminium Pegs 100 mm long 115 M & L for applying two coats of best quality polish to the Hat stand after preparation of old surfaces. 116 Side Board(FD-241)-(Qty 25 Nos)Taking out old unsv components of Side Board and S& F new Components as per Shape and size as existing made out of pre-laminated MDF board complete all as specified and shown on drawing and as directed by Engr-in-Charge :- 117 New Top. 118 New Sides Left and Right. 119 New Shutters and providing CP Knobs 40mm and drawer lock 4 lever to the shutter. 120 New Drawers including CP knob 40mm. 121 New back of 6mm thick commercial plywood. 122 New Legs made offirst class teak wood seasoned. 123 M & L for applying two coats of best quality polish to the side board after preparation of old surfaces. 124 Chair Dining(FD-279)- (Qty 250 Nos)Taking out old unsv components of Chair Dining and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 125 Front legs 126 Rear legs 127 Front rails 128 Side rails 129 Back rails 130 Back rest 131 Stiffeners 132 M & L for applying two coats of best quality polish to the chair after preparation of old surfaces. 133 Chair Easy(FD-229)-(Qty 100 Nos)Taking out old unsv components of Chair Easy and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 134 Front legs 135 Rear legs 136 Side rails 137 Front rails 138 Back rest 139 Arms 140 M & L for applying two coats of best quality polish to the chair after preparation of old surfaces. 141 Stool Dressing(FD-282)-(Qty 15 Nos)Taking out old unsv components of Stool dressing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 142 Legs 143 Long rails 144 Short rails 145 Stiffeners 146 M & L for applyingtwo coats of best quality polish to the stool after preparation of old surfaces. 147 Chair Writing(FD-280)- (Qty 80 Nos)Taking out old unsv components of Chair Writing and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 148 Front legs 149 Rear legs 150 Front rails 151 Side rails 152 Back rails 153 Back rest 154 Arms 155 Stiffeners 156 M & L for applying two coats of best quality polish to the chair after preparation of old surfaces. 157 Chair Easy, Dining, Writing and Stool Dressing(FD-229,279,280,282)Removing of old unsv plastic cane and M & L for re-canning of various types chairs and stool dressing etc,with half round plastic cane 2mm wide 0.4mm thick for seat and back, border with 4mm wide 0.5mm thick, finished smooth glossy and edges free from sharp cut complete all as specified and as shown on drawing and as directed by Engr-in-charge 158 Chair Dining Offrs(FD/MAP-II/04)- (Qty 200 Nos)Taking out old unsv components of Chair Dining Offrs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 159 Front legs 160 Rear legs 161 Front rails 162 Side rails 163 Back rails 164 Back rest 165 Cushion seat alongwith approved coloured fabric 166 Supply and fixing new tapestry cloth cover with seat duly stitched (Tapestry cloth not less than Rs.290/- per mtr) colour and pattern 167 Stiffeners 168 M & L for applying two coats of best quality polish to the chair after preparation of old surfaces. 169 Chair Dining JCOS/ORs(FD/MAP-II/05)- (Qty 170 Nos)Taking out old unsv components of Chair Dining JCOs/ORs and S & F new Components as per shape and size as existing made out of well seasoned 1st class teak wood complete all as specified and shown on drawing and as directed by Engr-in-charge :- 170 Front legs 171 Rear legs 172 Front rails 173 Side rails 174 Back rails 175 Back rest 176 Stiffeners 177 New PVC seat 178 M & L for applying two coats of best quality polish to the chair after preparation of old surfaces. 179 Table bed side(FD/E6/MAP/15(R ) - (Qty 200 Nos)Taking out old unsv components of Tablebed side and S & F new components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- 180 New front leg made out of 20mm dia steel square tube of wall thickness 1.6 mm. 181 New rear leg & top rail made out of 20mm dia steel square tube of wall thickness 1.6 mm. 182 New hard rubber shoes with inside steel washers for legs. 183 New drawers made out of 18mm thick pre-laminated MDF board on fron side and plywood sides and bottom including telescopic channels & CP handle 100mm. 184 New side made out of 18mm thick pre-laminated MDF board. 185 New top made out of 18mm thick pre-laminated MDF board & providing teakwood beading 4mm thickduly polished. 186 M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint black. 187 Bin soiled linen multi purpose(FD/E6/MAP/09) (Qty 12 Nos)Taking out old unsv components of Bin linen multi purpose and S & F new components as per shape and size as existing made out of pre-laminated MDF board complete all as specified and shown on drawing and as directed by Engr-in-Charge :- 188 New Top. 189 New Sides Left and Right. 190 New Shutters and providing CP handle 100mm magnetic catcher. 191 New drawers made out of 18mm thick pre-laminated MDF board on fron side and plywood sides and bottom including telescopic channels. 192 New back of 6mm thick commercial plywood. 193 New Legs made offirst class teak wood seasoned. 194 M & L for applying two coats of best quality polish to Bin linen table after preparation of old surfaces. 195 Dressing table Ladies incl stool(FD/MAP-II/07)-(Qty 20 Nos)Taking out old unsv components of Dressing table Ladies incl stool and S & F new components as per shape and size as existing made out of well seasoned 1st class teak wood & pre-laminated MDF board of make-Green/Century/Archid all as specified and shown on drawing and as directed by Engr-in-Charge :- 196 New looking mirror 5mm thick. 197 New frame and back member of the mirror including back side 6 mm thick commercial plywood. 198 New legs 199 New Top. 200 New drawers made out of 18mm thick pre-laminated MDF board on fron side and plywood sides and bottom including telescopic channels & CP handle 100mm. 201 New Shutters and providing CP handle 100mm magnetic catcher. 202 New sides. 203 New twin wheel castors 204 New cushion 32 density with covered on tapestry cloth for stool dressing 205 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 206 Mirror dressing Gents(FD/E6/MAP/16)-(Qty 100 Nos)Taking out old unsv components of Mirror dressing Gents and S & F new components as per shape and size as existing made out of well seasoned 1st class teak wood & pre-laminated MDF board complete all as specified and shown on drawing and as directed by Engr-in-Charge :- 207 New looking mirror 5mm thick . 208 New frame of the mirror including 12mm thick commercial plywood with magnetic catchet & CP handle 100mm. 209 New back plywood 12mm thick. 210 New sides, top & bottom. 211 New glass shelves 5mm thick 212 M & L for applying two coats of best quality polish to the dressing Gents after preparation of old surfaces. 213 Table dining 120x90cm(FD/MAP-II/03)- (Qty 30 Nos)Taking out old unsv components of Table Dinning 120x90cm and S& F new components as per Shape and size as existing made out of well seasoned 1st class teak wood all as specified and shown on drawing and as directed by Engr-in-Charge :- 214 New Top made out of 18mm thick pre-laminated MDF board teak faced & providing teakwood beading 4mm thick all around the top duly polished, includig fixing of 8 Nos FI bracket 25x3mm to joning corner of rails and legs for each table 215 New Legs 216 New Long Rails 217 New Short Rails 218 M & L for applying two coats of best quality polish to the table after preparation of old surfaces. 219 Charpoy GI Pipe with plywood top(FD-220)- (Qty 200 Nos)Taking out old unsv components from charpoy GI pipe and S & F new components as per existing shape & size complete all as specified and shown on drawing and as directed by Engr-in-Charge. 220 New Top of 12 mm thick ply wood commercial . 221 New MS plate 50x5mm thick and 900mm long painted with two coats of black paint over a coat of red oxide primer. 222 New long rails made out of GI pipe 32 mm dia, medium grade, as per existing shape and size and making necessary threads on both ends complete all as specified and shown on drawing and as directed. 223 Fixing only short rails (converted from retrieved long rails) of charpoy GI pipe including necessary cutting, threading, complete all as specified and as directed.(Note : GI pipe retrieved from item No 30.03 above shall be re-used under this item) 224 Fixing only legs (converted from retrieved short rails) of charpoy GI pipe made out of 32mm dia GI pipe with necessary cutting, threading and welding FI clamp two Nosetc. complete all as specified and as directed. (Note : GI pipe retrieved from item No 30.03 above shall be re-used under this item) 225 New 3 way GI elbow (ISI marked) suitable for 32mm bore GI pipe. 226 New check nut 6mm thick suitable for 32mm bore GI pipe. 227 New hard rubber shoes with inside steel washers for legs. 228 M & L for applyingone coat of synthetic enamel paint aluminium GI pipe & black paint on ftat iron after preparation of surfaces.

INR 500 /-

INR 76000.0 /-

INR 38 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB