|
| 1 | WBM Grading-2Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening/binding materials to fill-up the interstices of coarse aggregate, watering and compacting to the required density grading 2.As per MORD Specification & Clause No. 405, 4.7(2)(A) By Manual Means, complete in all respect as per directions of Engineer in charge. (Including Labour Cess & Roylty) (GST will be paid extra as applicable) |
| 2 | WBM Grading-3Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with smooth wheel roller 80-100 kN in stages to proper grade and camber, applying and brooming, stone screening to fill-up the interstices of coarse aggregate, watering and compacting to the required density Grading 3. As per MORD Specification & Clause No. 405(A), 4.7(3)(A) By Manual Means, complete in all respect as per directions of Engineer in charge. (Including Labour Cess & Roylty) (GST will be paid extra as applicable) |
| 3 | Brick edging on both sides of the road of first class bricks 8cm. (3\") wide and 12cm. (4.5\") deep laid with mud mortar including labour & supply of bricks finished to the required template and in proper alignment and also including dressing ramming the excavated earth. As per PWD Specification & S.I.No. 765. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) |
| 4 | Prime CoatProviding and applying primer coat with Emulsion Himcole SS-1 Bulk on prepared surface of granular Base including clearing of road surface and spraying primer at the rate of 0.70 kg/sqm using mechanical means. As per MORD Specification & Clause No. 502, 5.1(i) complete in all respect as per directions of Engineer in charge. (Including Labour Cess & Emulsion) (GST will be paid extra as applicable) |
| 5 | Tack CoatProviding and applying tack coat with Bitumen VG-10 using bitumen distributor at the rate of 0.35 kg per sqm on the preparedbituminous surface cleaned with Hydraulic broom, as perMORD Sr. No. 5.2(ii) andTechnical Specification Clause 503 Including cost of Bitumen (Including Labour Cess & GST will be paid extra as applicable) |
| 6 | 20mm. Thick open-graded premix carpet20mm thick Open-Graded Premix Carpet using Bituminous (penetration grade/modified bitumen) Binder Providing, laying and rolling of open-graded premix carpet of 20 mm thickness composed of 13.2 mm to 5.6 mm aggregates either using penetration grade bitumen or emulsion to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed by seal coat of either Type C as per MORD Sr.No. 5.9 Case I(I) and Technical Specification Clause 508. Case - I By Manual Means (I) Bitumen (S-90) Including cost of Bitumen (Including Labour Cess & GST will be paid extra as applicable) |
| 7 | Seal CoatSeal Coat Providing and laying seal coat sealing the voids in a bituminous surface laid to the specified levels, grade and cross fall using Type C as per MORD Sr.No. 5.12 By Manual Case-III-Type c(I) and Technical Specification Clause 510 A. By Manual MeansBitumen (S-90) Including cost of Bitumen (Including Labour Cess & GST will be paid extra as applicable) |
| 8 | Earth work in cutting or in embankment in ordinary soil, excavation to be in the form of regular pits not exceeding 0.5m in depth and earthwork in embankment to be in 20cm. layers, including ramming and dessing the surface to required levels & slopes & also including 1.5m. lift & 30m. lead. The earth from cutting to be used in making embankment or to be deposited as spoil banks within 30m. Distance as directed by the engineer-in-charge. (Excluding Royalty). (For Earthen Shoulder)As per PWD Specification & S.I.No. 253. complete in all respect as per directions of Engineer in charge. (Including Labour Cess) (GST will be paid extra as applicable) |
