|
| 1 | Removing dry or oil bound distemper, water proofing cement paint and the like by scrapping, sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete D.S.R. 13.91 |
| 2 | Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead.Item No- 27 (15.56) |
| 3 | 15mmcement plaster 1:3(1 cement:3 coarse sand) finished with a floatingcoat of cement on the rough side of single or half brick wall DS.R.No-13.10 |
| 4 | Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. D.S.R.13.80 |
| 5 | Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content.With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre DSR 13.85.3 |
| 6 | Finishing walls with Premium Acrylic Smooth exterior paint with sillicone additives of required shade. Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm.) over existing cement paint surface. D.S.R. 13.112.1 |
| 7 | Distempering with 1st quality acrylic distemper (ready mixed) having VOC (Volatile Organic Compound ) content less than 50 gram/ litre, of approved brand and manufacturer including applying additional coats wherever required to achieve even shade and colour Old work (one or more coats) DSR 13.81.1 |
| 8 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : One or more coats on old work DSR 13.99.1 |
| 9 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in superstructure above plinth level up to floor V level in all shapes and sizes in : Cement mortar 1:4 (1 cement : 4 coarse sand) DSR 6.4.1 |
| 10 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS 13592 Type A, includingjointing with seal ring conforming to IS 5382, Leaving 10 mm gap for thermal expansion All fittings like two Nos Bend one no coupler or any other accessories and P/F PVC pipe clips fixed by means of 50x50x50 mm hard wood plug, Secrewedwith MS screws of required length in wall face includingcutting brick work and fixing incement mortar 1:4(i) Single socketed pipes 150 mm diameter.A.R. |
| 11 | Disposal of building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical means, including loading, transporting, unloading to approved municipal dumping ground or as approved by Engineer-in-charge, beyond 50 m initial lead, for all leads including all lifts involved D.S.R. 15.60 |
| 12 | Dismantling doors, windows and clerestory windows (steel or wood shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead: of area 3 sq. metres and below D.S.R.15.12.1 |
| 13 | Providing and fixing ISI marked flush door shutters conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:30 mm thick including ISI marked Stainless Steel butt hinges with necessary Screws D.S.R No- 9.21.2 |
| 14 | Cement concrete flooring 1:2:4(1 cement:2 coarse sand: 4 graded stone aggregate) finished with a floating coat of neat cement including cement slurry but excluding cost of nosing of steps etc.complete. 40 mm thick with 20 mmnominal size stone aggregates.DSR No-11.3.1 |
| 15 | Providing and laying water proofing treatment on roofs of slabs by applying cementslurrymixedwithwaterproofingcementcompoundconsistingof applying: (a) after surface preparation, first layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/sqm.(b) laying second layer of Fibre glass cloth when the first layer is still green. Overlaps of joints of fibre cloth should not be less than 10 cm. (c) third layer of 1.5 mm thickness consisting of slurry of cement @ 1.289 kg/ sqm mixed with water proofing cement compound @ 0.670 kg/sqm and coarse sand @ 1.289 kg/sqm. This will be allowed to air cure for 4 hours followed by water curing for 48 hours. The entire treatment will be taken upto 30 cm on parapet wall and tucked into groove in parapet all around. (d) fourth and final layer of brick tiling with cement mortar (which will be paid for separately. For the purpose of measurement the entire treated surface will be measured.D.S.R. 22.6 |
