Supply Of C.I./C.S Casted Item , C.I. Casted Items On New Basis , C.I. Idler For Cane Carrier (I) As Per Drawing No. Ksc/Cc1/4/17 , C.I. Pulley (As Per Drawing) With Machining , C.I. Coupling Different Size (As Per Drawing) , C.I. Casting Various Size (Gulla) As Per Drawing With Rough Machining. Different Size , C.I. Casted Items (On Conversion Basis) , C.I. Idler For Cane Carrier (I) As Per Drawing No. Ksc/Cc1/4/17 , C.I. Pulley (As Per Drawing) With Machining , C.I. Coupling Difrent Size (As Per Drawing) , C.I. Casting Various Size (Gulla) As Per Drawing With Rough Machining. Different Size , Cast Steel Spur Gear & Pinion New Basis , Cast Steel & Spur Gear- 72 Teeth Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70Mm, Bore- 45Mmod- 166.4 Mm, Module- 6.4-Approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch As Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each , Cast Steel Trash Plate (Lenth 1680 Mm) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22 , C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg. , C.S Gear 68 Teeth, Module-6.14 Face Width-65Mm, O.D--430Mm Drg No.-Ksc/Unloder/17 , C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg , C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8Drg. No.-Ksc/Unloder/17 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 (Tail End) Material 2708 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 (Driving Shaft) Material 2708 , C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163 , C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887 , Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od-208 Mm Bore-50Mm , C.S.Worm Shaft ( As Per Sample) For Mill , C.S. Mill Coupling (Weight 700Kg Approx) As Per Drawing , C.S. Mill Crown Pinion 16 Teeth (Weight 1500 Kg.) As Per Drawing , Cast Steel Spur Gear & Pinion On Conversion Basis , Cast Steel & Spur Gear- 72 Teeth Face Width- 75Mm, Bore- 50Mm Od- 473 Mm, Module- 6.4. Approx Weight 90 Kg , Cast Steel & Spur Gear- 26 Teeth Face Width- 75Mm, Bore- 45Mm Od- 178.24 Mm, Module- 6.4- Approx Weight 11.6 Kg , Cast Steel Pinion- 24 Teeth Face Width- 70Mm, Bore- 45Mmod- 166.4 Mm, Module- 6.4-Approx Weight 9.7 Kg , Cast Steel Pinion- 34 Teeth Face Width- 75Mm, Bore- 40Mm Od- 308 Mm, Module- 8.56. Approx Weight 20 Kg , Cast Steel Gear Pinion- 50 Teeth As Per Drg No. Mills-138Approx Weight 11 Kg , Cast Steel Sprocket- 13 Teeth 6” Pitch As Per Drg. Mills-27 , Cast Steel Pinion- 18 Teeth Face Width- 75Mm, Bore- 45Mm Od- 128 Mm, Module- 6.4.Approx Weight 5 Kg , C.S.Scaper For Mills Duly Machined As Per Sample Drg.No Ksc/Mh/91618 Approx Wt-190Kg Each , Cast Steel Trash Plate (Lenth 1680 Mm) Made Of Is 2708 Grade Iii Duly Rough Machined As Per Drg.No – Ksc/Mh/285/22 , C.S. Wheel For Cane Unloader Bridge As Per Drg.No. Ksc/Unloader/2/17.Approx Wt 185 Kg. , C.S Gear 68 Teeth, Module-6.14 Face Width-65Mm, O.D--430Mm Drg No.-Ksc/Unloder/17 , C.S.Wheel For Cane Unloder Trolly Drg No.-Ksc/Cr/145 Approx.Wight-55Kg , C.S.Pinion-18Teeth, Module-6.14, F.W-65 Od-122.8 Drg. No.-Ksc/Unloder/17 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1565 (Tail End) Material 2708 , C.S. Sprroket 6 Pich 14 Teeth Drg No.-Ksc/M/1564 (Driving Shaft) Material 2708 , C.S.Sproket-36 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No Ksc/Boiler-163 , C.S. Sprocket 17 Teeth For Duplex Chain 2 1/2 Pitch Material 2708 Drg No-Ksc/Mill/4887 , Opertuinity Device Of Trash Turner Beam Material-Ss Drg No. Mills-8488 , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-10, Fw-110Mm Od-260Mm Bore-50Mm , C.S. Pinion Duly Hardent Tempered And Grinded- 24 Teeth, Module-8, Fw-120Mm Od- 208 Mm Bore-50Mm , C.S.Worm Shaft ( As Per Sample) For Mill , C.S. Mill Coupling (Weight 700Kg Approx) As Per Drawing , C.S. Mill Crown Pinion 16 Teeth (Weight 1500 Kg.) As Per Drawing
