Tender For Electrical Work In The Construction Of Phc Building At Neemala (Thanagazi), Distt. Alwar; 1 ELECTRIC WORK 2 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) ofapproved make in surface / recessed ISI marked medium duty PVC conduit & its accessories, round tiles,Hot Dipped Galvanized Modular Box with earth terminal, 6 A Modular switch,Modular plate with grid plate,screws,making connections, testing etc. as required. Group 1 3 Short point (up to 3 mtr.) 4 Medium point (up to 6 mtr.) 5 Long point(up to 10 mtr..) 6 Wiring of 3 pin 5 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade(IS:694) of approved makein surface / recessed ISI marked medium duty PVC conduit & its accessories, Hot Dipped Galvanized M.S Modular box of 20 SWG with earth terminal, 6 A modularswitch, 6 A modular socket, Modular plate with grid plate, screws, making connections, testing etc. as required. Group1 7 On board 8 Supplying and fixing of power plug point Modular accessories on hot dipped galvanized modular on surface or in recessed with suitable size of grid plate with cover plate including cost ofmodular 16 amp. Switch and socket outlet, making connection , testing , etc. as required. Group1 9 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor ISI marked (IS:694) of 1.1 kV grade and approved make in existingsurface or recessed conduit/casing capping including making connections etc. as required.G1 10 2 x 1.5 sq.mm 11 2 x 2.5 sq. mm. + 1x1.5sqmm 12 2 x 4.0 sq. mm. + 1 x 2.5 sq. mm. 13 2 x 6.0 sq. mm. + 1 x 2.5 sq. mm. 14 4 x 6.0 sq.mm 15 1 x 2.5 sq.mm 16 P&F Recessed/ Surface mounting heavy duty horizontal type sheet steel Distribution board phophatised/ powder painted complete with copper bus bar, shorting link , neutral link, earth link and din bar, conforming to IS13032 & IS8623 including making internal DBterminations with copper lugs , testing etc. as required.G1 17 Double door (Three phase) 18 i) 6 Way 19 Double door (single phase) 20 12 Way 21 16 Way 22 P&F 240/415 V MCB of breaking capacity not less than 10 KA (B/ C/ D tripping characteristic) ISI marked IS 8828(1996)]/ conforming to IEC 60898 in existing board/sheets including making connections with lugs, testing etc. as required.GROUP 1 23 Single pole MCB 24 6 A to 32 A rating 25 Four pole MCB 26 40 A 63 A rating 27 S&F following sizes (dia.) of ISI marked medium duty PVC conduit along with accessories in surface / recessed using saddles, clamps, fastener as required includingcutting the wall and making good the same as required.GROUP 1 28 20 mm 29 25 mm 30 32 mm 31 P & F phenolic laminated sheet 2.0 mm thick of size 75 mm dia. Including screws, cup washer as required. 32 P & F following modular accessories made out of unbreakable and fire retardant poly carbonate with silver contacts including making connections testing etc. as required Group1 33 5 step fan regulator 2 Module 34 Blanking plate 35 25 Amp. 2 Module Socket 36 25 Amp. 2 Module Motor Starter with on / off Push button 37 Making of hole in wall of required size for housing exhaust fan and making good the same, with cement plaster as required of following size: 38 Up to 457 mm size 39 P & F 18 swgM.S. Recessed fan box, hexagonal/ round of size 130 mm dia, depth 75mm,12 mm dia rod fan hook with 100 mmlength extended on each side . 40 P&F of Heavy duty capacitor start 900/1400 RPM single phase ISI marked Exhaustfan,IS:2312 marked in existing opening including making connections testing etc. as required.GROUP 1 41 300 mm sweep(900/1400 RPM) 42 P & F of Gravity Louver shutter of superior quality made out of frame of18 swg M.S. sheet & Louvers made from 24 swg MS Sheetwith enamel paint including cost of nuts, bolts, etc as reqd. 43 Up to 380 mm size 44 P & F of IP20 LED batten type light fixture made from CRCA sheet steel housing suitable for moutning LED tube system (integral driver), Power Consumption of18W / 36W 1500-3000 lumens, system lumen efficiency 80 lm/Watt output, life time of 50,000 burning hours with 70% initial lumen maintained. CCT 3000°K, 4000°K& 6000°K.. Gr1 45 4 LED Tube shape fixture 18W 46 P&F 1200mm sweep BEE 5 star rated double ball bearing capactor start , aluminium body & blade celing fan complying to IS 374: 1979, I/P 50 watt at max speed & 230 volt, air delivery > 210 CMM, speed >330 RPM with down rod upto 30 cm with 3X 1.5 sqmm pvc insulated flexible copper conductor making connection testing etc as required. Gr1 as per Electrical BSR 2013 47 1200 mm Sweep 5 Star rated 48 P&F of Double ball bearing, capacitor startsingle phase metallicblade fresh air fan, in existing opening including cost of hardware , flexible copper conductor ,making connections, testing etc. as required.Group1 49 225 mm sweep 50 P&F of recessed mounting heavy duty sheet steel End Box for distribution boerd duly phophatised powder coated complete as requiredGroup 1 51 For TPN 6way DB 52 P/Laying P.V.C. insulated & P.V.C. sheathed cable of 1.1 KV grade with aluminium conductor of IS:1554 P-I of Group2of approved makein ground as per IS:1255 including excavation of 30cmx75cm size trench, 25 cm thick underlayer ofsand,IInd class bricks covering, refilling earth,compaction of earth, making necessary connection, testing etc. as required of size.GROUP 1 (armoured) In existing RCC/HUME/STONEWARE PIPE 53 25.0 Sq.mm 54 4 core 55 6.0 Sq.mm 56 2 core 57 10.0 Sq.mm 58 2 core 59 Mainteneance free Gel Earthing with copper Earth ectrode of size50 mm x 2 m by embodying 2.5 mtr. below the ground level with 20 mm dia. G.I. B class watering Pipe including all accessories like nut, bolts, reducer ,nipple, wire meshed funnel, and c.c finished chamber coverd with hinged type with locking arraangment C.I cover ,C.I frame of size 300mm x 300mm complete with filling of ash gel compound (dharken or equivelent approved make), testing of earth resistance as required. 60 with Strip in Pipe Technology with 80 - 100 micron GI Coating 61 GI pipe 2000 mm long , 63 / 80 mm , Inner strip 50 mm x 3 mm copper 62 S & Laying following size earth wire/stripin horizontal or vertical run in ground/surface/recess including riveting, soldering, saddles, making connection etc. as required. 63 8 SWG copper wire 64 P & F IP-65 / IP-66 protected LED street light luminaire on existing bracket. Fixture made from powder coated single piece pressure die cast aluminium housing with Heat dissipation fins on housing with High Power LEDs of CREE / NICHIA / OSRAM / PHILIPS make. DIffuser / Glass cover for ensuring IP65 protection for Lamp & control gear compartment, System Lumen output of 1500 - 8500 High Power LED. Integrated Driver shall be high efficiency having efficiency > 85% and in compliance to IEC standardsSystem life of 25,000 Burning Hours with 70% of initial Lumens maintained. Fixture shall be inCE Compliance.Gr1 65 IP - 65 Protected LED Street Light Luminaire 66 LED Street Light fixture 20-25 Watt 67 S & F of Street light bracket made out from following size of B class GI pipe with heavy duty pole clamp, Saddles suitable fastners etc. as required. 68 25 mm Dia. 69 SITC of quick make and quick break3 pole current limiting MCCB having following current rating, short circuitbreaking capacityat 440/415 V, 50 Hz; O/L & S/C settings and conforming to IS 60947-2 / IEC 60947-2 with frontface and centralised adjustable, line load interchangeability, having positive isolation capability, provision for UVR , shunt trip , earth fault trip, push( test) to trip, including making connections with lugs & spreaders,etc. as required. 70 With Thermal Magnetic release 71 160 Amp, 25 kA, adjustable O/L & fixed S/C setting, Ics = 100 % Icu 72 up to 100 Amp , 10 kA, fixed O/L & S/C setting 73 Supplying and fixing of Aluminium / Copper bus barby means of SMC / DMC type insulator, high tensile nuts and bolts spring washers in existing panel including bending , cutting in required shape and size and colour coding with heat shrinkable PVC sleeves. 74 Electrolytic grade Copper bus bar 75 P & F ISI markedding dong/musical chime bell including making connection testing etc. as required. 76 P&F on load change over switch, front handle operated, four pole 415 V conforming to IS:13947 P-III including connections , testing etc. as required in the following rating: 77 Open execution type 78 63 A 79 SITC of wall/ free standing floor mounted dust and vermin proof compartmentalisedcubical panel made out of CRCA sheet , required hardware,duly treated for derusting in 7 tank process with dephosphating and with powder coating on both side of panel in desired shadeThe panel having PU/ Neoprene rubber gasket of not less than 3mm thickness , separate detachable gland plate M.S. base channel ,hinged door with locking arrangement for equipment/switchgear. Thickness of sheet shallnot be less than 1.6 mm up to 600 mm length / widthof any compartment and be of 2.0 mm above 600 mm. Load bearing structure shall beof 2.0 mmthick sheet supported by base M.S. channel if required . Side walls and cable alley compartments having bolted type doors with / withoutdetachable extension type structure. (only outer area on all sides shall be measured & panel to be fabricated from CPRI approved fabricator) 80 SF of (0-500) V range Volt meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Gr1 81 Analog type ( 96 mm x 96 mm ) 82 SF of CT operated direct reading typeAmpere meter on existing panel , making connection by PVC insulated copper conductor with PVC sleeves / channel etc. as required. Gr1 83 Analog type ( 96 mm x 96 mm ) 84 Below 500 A 85 SF ofCurrent Transformer, with all necessary support in existing panel including connection etc. as required . Gr1 86 up to 150 / 5 Ratio , 5 VA , class 1 accuracy 87 SF of selector switch of 10 A for voltmeter (4 position ) including making connection etc.as required . Gr1 88 SF of CT linked selector switch of 10 AforAmpere meter (4 position ) including making connection etc.as required . Gr1 89 SF of110/220 V, LED (22.5 mm dia ) Indicatinglamp with integral circuit, terminal block, including connection etc. as required. Gr1 90 Red/yellow/Green colour 91 SITC of Air Cooled split type Air conditioners complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (EP foampipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 4 Mtr (IDU to ODU), R-22/R-410 Refrigerant, Remote, suitable for 400/230V +10% of 50 Hz ,1 /3 phaseACsupply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / reciprocating / rotary compressor as specified. gr1 92 1.5 TR with 5 star rating of BEE 93 Supply, Fixing and testing of following capacity wall mounted stablisers having output voltage variation from 200 V to 250 V(+/-5%) with input voltage variation from 170 V to 260 V, time delay facility from 2 to 4 minute and high cutoff at 270 V with providing of 16 Amp plug top making connection etc complete in all respect gr1 94 4 kVA 95 SITC of MNRE approved & confirming to IS:12933 P-1,2,3&5 Evacuated tube Collector type solar hot water system withcollector, insulated stainless steel storage tank with electrical back up , MS standfor Collector & Tank etc. as required. of following capacity. gr1 96 125 litre/ day 97 P & Fof IP20 LED Recessed / Surface Mounted, Round / Sqaure Non-Dimmable Downlight with die-cast aluminum housing & Heat Sink for heat dissipation, high purity reflector with external driver having efficiency > 85% and in compliance to IEC standards. Power Consumption of ≤ 7W/ 10W / 15W / 18W with ~ 500 / 750 / 1100 / 1250 lumens, System Lumen efficacy of 70 lm / watt output suitable to replace 1x18W / 2x18W / 2x 26W CFL Downlights, life time of 50000 Burning Hours with 70% of intial Lumen maintaned. CCT 3000°K , 4000°K& 6000°K. Fixture shall be CE compliance. Gr1 98 Surface Mounting 99 LED Downlight 18/20W 100 SITC of ISI mark( IS:8472) self priming monoblock pump set of approved make, TEFC, permanent split capacitor type (PSC), fitted with thermal overload protection, mechanical seal, 1440/1500 RPM, single phase(180 to 240 V). Including cost of hardware etc on existing platform complete. Pump shall have following HP Rating, phase, Head, minimum Discharge respectively. gr1 101 Self priming pumps 102 1.0/ 1.1 HP, 1-Ø, (10-50)Mtr, (53-6.5)LPM 103 0.5 HP, 1-Ø, (6-28)Mtr, (45-7.5)LPM 104 Supply & FixingISI marked( IS : 15683 )Portable Fire Exitnguisher, ABC type,finished externally with red enamel paint, completein all respects includinginitial fill and wall suspension of following capacity. 105 4 kg 106 P & F of 4 star ratedvertical storage water heater with outer casing made of M.S.sheet finished with anti-corrosive powder coating,inner tank made of pure electrolytic copper/stainless steel / SPHP, Tubular copper sheathed and Nickel plated heating element/ twin ceremic cartridge heating element, stem type thermostat and thermal cut out,Dual indicating lamps for power supply and thermostat,PUF insulation, Pressure relase valve,fusible plug etc. as required held in position with 4 no. rack bolts,duly wired with 3 core 2.5/4.0 Sqmm PVC insulated & sheathed copper conductor and 16 A/25A three pin plug top,including making inlet,outlet heavy gauge C.P./ Flexible alloyconnection,testing etc. as required. 107 15 Ltr. 108 Supply and fixing of Oil / Air break Starter panel made out of sheet steelpowder coated enclosure comprising of over load protection relay, short circuit & single phasing protection, ON / OFFpush buttons,ammeter, voltmeter, indicating lamps etc. complete in all respect suitable for following rating motors.G 1 109 For single phase Submersible / Monoblockpump 110 0.5 HP to 3.0 HP 111 Supplying and drawing PVC/ Polythene insulated and PVC sheathed unarmoured/ armoured telephone cable with 0.5 mm dia. Tinned /annealed copper conductor taped &confirming to ITD specification S/WS -113C ofapproved make in existingsurface or recessed conduit/casing capping. 112 Unarmoured Telephone cable in existingsurface or recessed conduit/casing capping. 113 2 pair 114 P & F Krone module with base framein the recess / surface made out of 16 SWG sheet steel box, front openable, having locking arrangements duly powder painted.,including dressing, ferrulingandpunchingof telephone cable with krone tool etc. as required. 115 10 Pairs 116 P & F ISI markedflush type single line telephone jack including making connection testing etc. as required. 117 Supply , Drawing and Testing of 4 pair, 24 AWG UTP Cat 6 Cable as per latest ammendments of TIA /EIA 568 B.2-1 Specifications in existing MS/PVC Conduits including making connections to Information outlets and Patch Panels with ferruling at both ends for identification with necessary tools for punching, stripping, crimping and testing required 118 Supply and Installation of Information outlets made of high impact plastic body ABS FR Grade with spring loaded collapsible shutters in jack Recess, suitable for Cat 6 application complying to latest ammendments EIA/ TIA 568 B.2-1 Specifications in existing modular /MS Boxes along with necessory connections as required 119 Supply & fixing of Faceplate for Flush / SurfaceMount Information Outlets Single Aperture with screw hole covers & Icon Tree Size 86mmX86mm 120 Single Aperture 121 P&F 240/415 V isolator conforming to IS:13947-III/ IEC 60947-3 on existing board / sheet including making connections, testing etc. as required. 122 Double pole isolator 123 30 A / 40 A rating 124 Wiring of twin control light point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) of approved make in surface / recessed ISI marked medium duty PVC conduit & its accessories, round tles, Hot Dipped Galvanized M.S Modularbox of 20 SWG with earth terminal,6 A two way Modular switch, Modular plate with grid plate,screws,making connections, testing etc. as required. 125 Medium point (up to 6 mtr.) 126 Long point(up to 10 mtr..) 127 Supply , Installation, Testing and Comissioning of Wall mounted Communication rack with glass doors, handles ,lock , Top and Bottom Cable entries, Supports for mounting rack on wall , Cable managers, one Fan, Equipment mounting hardware, power supply box for supplying power to switches, fans etc along with earth continuity kit, Mcb, indicator, moulded power supply cable 128 6 U(44 mm ) wall mounted
