|
| 1 | Carrying out the resistivity survey by VES method using Schlumberger configuration for locating the proper spot for drilling of tube well with in the selected habitation, including Photography, interpretation of resistivity data and submission of report in the desired format along with resistivity necessary graph, photographs and readings.UADD SOR 20.1/254 |
| 2 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 200mm nominal diameter casing pipe upto desired depth below ground level inclusive of thelabour chargesfor transporting, lowering and fixing of 200mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.6/255 |
| 3 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 4 | in all types of rocks. |
| 5 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 150mm nominal diameter casing pipe upto desired depth below ground level inclusive of thelabour chargesfor transporting, lowering and fixing of 150mm nominal diameter M,S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.4/255 |
| 6 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 7 | in all types of rocks. |
| 8 | Drilling of perfectly vertical bore hole of 150mm diameter upto desired depth below ground level in all types of rock including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete20.5/255 |
| 9 | Drilling of perfectly vertical bore hole of a diameter suitable to receive 125mm nominal diameter casing pipe upto desired depth below ground level inclusive of thelabour chargesfor transporting, lowering and fixing of 125mm nominal diameter M.S./G.I./U.P.V.C. casing pipe inside the bore hole including all works pertaining to drilling such as transportation, installation and removal of drilling machine etc. complete.20.2/254 |
| 10 | in all types of collapsible strata consisting of soils, clays, sand, moorum, gravel, boulders etc. |
| 11 | in all types of rocks. |
| 12 | Supply of I.S.I. marked G.I. casing pipe (Plain) medium class in 4 to 7 meters length one end fitted with socket as per I.S. 1239 (Part-1 & Part-2) 1992 with IVth revision (Up-to-date amendments)20.25/259 |
| 13 | 125mm dia |
| 14 | 150mm dia |
| 15 | Supplying & Installation of Energy efficiant five star BEE rating ISI Marked requiredcapacity single phase, 50 Hz, 220V, deep well submersible pump Stainless Steel body, suitable for 4\"/6\" tube well with Control Panel Starter suitable for Submersible pump with dry run protection, connections, including submersible flat cable ISI marked 3 core copper wire, length equal to head of the pump at duty point + 3mtr. in single or double run (as per requirement of the set/control panel. The size of the cable should be so selected that voltage drop at motor terminal does not exceed the limit of the rated voltage) clamps, bore cap etc. as required as per specifications but excluding pipe, SS/ Nylon wire rope. Make - Kirloskar, falcon, Texmo, Luby & any ISI standard make) 11.2/164 |
| 16 | 2 HP Head Mt. 163-58 Discharge LPM 10-45 |
| 17 | Supplying and laying of submersible flat cable ISI marked 3 core copper wire of suitable size with proper clamping of approved make. 2.5 Sq.mm multi strand11.5.1/165 |
| 18 | Supplying and laying of approved Make Nylon rope 12mm thick complete with binding for support of pump and motor. 11.6/165 |
| 19 | Labour only for lowering of single phase submersible pumping set of capacity 1 to 3 hp in the tube well with flexible/ rigid pipe line assembly, electrical cable, nylone rope, testing etc. Complete including connecting the electrical cable from pump & starter - \depth up to 150 mtr.26.21/330 |
| 20 | Providing and Supplying Blue MDPE pipes conforming to ISO 4427:1996 manufactured from virgin resin PE 80 Food grade compounded Raw Material having Blue Colour only with quality assurance certificate from quality agencies like WRC/CIPET (India)/ DVGM/KIWA /SPGN etc. for usage in Drinking Water System. The cost shall include testing of all materials, Inspection charges, transportation up to site, transit insurance, loading, unloading, stacking etc. complete. |
| 21 | Providing, laying, Jointing & field testing of High Density Polyethylene pipes, (HDPE) confirming to IS 4984/ 14151/ 12786/ 13488 with necessaryjointing material like mechanical connector or jointing pipes by heating to the ends of pipes with the help of Teflon coated electric mirror/ heater to the required temperature and then pressing the ends together against each other, to form a monolithic & leak proof jointby thermosetting process. It may be required to be done with Jacks/Hydraulic Jacks/ But fusion machine. (50mm & above fusion jointed & below 50mm mechanical jointed) 32 mm dia |
| 22 | Providing and fixing gun metal/ brass check (non-return) valves Class-II, female ends, tested to 21.09 kg/sq.cm. |
| 23 | 32mm dia |
| 24 | Providing and fixing G. I. Bend 90 degree in G.I. Pipe line i/c cutting threading testing etc. complete (Old work) |
| 25 | 32mm dia |
