|
| 1 | A. Supply of cast iron scrapper, Magma Rotor, Magma Peddle and Coupling etc with new casting |
| 2 | B. Supply of cast iron scrapper, Magma Rotor, Magma Peddle and Coupling etc on conversion basis. |
| 3 | C. Machining Charges (If Required) |
| 4 | Supply of Boiler Material on conversion basis composition IS210 Grade 25CR, 1.2 Suitable to with stands 1000 degree C. Temp. |
| 5 | A. CI Furnace Grate Bar |
| 6 | B. CI Furnace Grate Bar Jally |
| 7 | C. CI Furnace Grate Bar Holder |
| 8 | D. CI Furnace Nozzle |
| 9 | E.CI Mouth Piece |
| 10 | F. CI Bag Furnace chute |
| 11 | G. CI Hanger |
| 12 | Supply of CI V Grove Pully with New Casting |
| 13 | Supply of CI V Grove Pully on conversion basis. |
| 14 | Supply of CI bearing housing for magma mixer with new casting |
| 15 | Supply of CI bearing housing for magma mixer on conversion basis |
| 16 | Supply of CI Duck foot bend upto Size 12\" on conversion basis |
| 17 | MS Scrapper for under feed roller material IS2060 (Sail) Pitch 70mm as per Drg No. 10/6/04M Grooving details as per Drg No. 8/9/19 |
| 18 | Cast Steel Worm for Crystallizer as per drg No. 90/08/17 |
| 19 | Cast Steel Gear 48 teeth for Magma Mixer as per Drg No. 2k1/10/90 |
| 20 | Cast Steel pinion 19 Teeth as per Drg No. 15/7/86B |
| 21 | Cast Steel pinion 19 Teeth as per Drg No. 15/7/86C |
| 22 | Cast Steel Helical Pinion 12 Teeth as per Drg Material EN-8 |
| 23 | EN-8 Spidle with gear for super heater drain valve teeth 10 as per Drg |
| 24 | MS Fins for Steam seprator for boiler furnace |
| 25 | Cast Steel Sporket for Mud Mixture as per Drg No. 05/06/09 |
| 26 | MS Sprocket as per Drg No. 16/8/06D Item No. A (95 Teeth) |
| 27 | MS Sporcket as per Drg No. 16/8/06D Item No. B |
| 28 | Cast Irom Worm Wheel for 60 Ton Crystillizer OD 1362mm x Bore 150.6 mm x No. of teeth 72as per Drg. No. 17/8/13C |
| 29 | CI PulleySize – OD 380 mmwidth – 70 mm03 Nos. V Groove As per Drg. N o. 06/7/0R(Drawing Enclosed) |
| 30 | CI PulleySize – OD 602 mmwidth – 112 mm04 Nos. V Groove As per Drg. N o. 07/8/07(Drawing Enclosed) |
| 31 | Cast Steel Worm for 60 Ton Crystallizer OD 220mm as per Drg No. 17/8/13C (B) |
| 32 | Hanger With Nut for Super Heater Coil of New Boiler Cap. 40 Ton/HR Pr. 45 Kg./CM2 Material SS-316L |
| 33 | Cast Steel Driving Sprocket 17 No. Teeth 76.2mm pitch as per drg. No. 17/05/3M Item No. 02 |
| 34 | Cast Iron Pulley for C-1 C/FMachine OD 260 Dia , 08 No. – V – Groove, B Section Belt as per Drg. No. 19/08/14 C/F , Dynamically Balanced |
| 35 | C. I Clamp for Boiler No. 01 & 02 as per drg. No. R/89/07/36/90 |
| 36 | C. I Clamp for beam of Boiler No. 01 & 02 (Complete Set with Bolt & Nut) |
| 37 | (a) as per drg. No. 89/07/35A ( 01 of 02) |
| 38 | (b) as per drg. No. 89/07/35A ( 02 of 02) |
| 39 | C.I Supporting Hanger for Furnace Beam of Boiler No. 01as per drg. |
| 40 | C.I Furnace Hanger of Back Side Beam for Boiler No. 01& 02 as per drg. |
| 41 | C.I Plate for Boiler No. 03 as per drg. No. 18/92/7/Rev. |
| 42 | C.I Supporting Clit for Furnace as per drg. L-30 Nos., R-30 Nos. |
| 43 | C.I Supporting Plate of Furnace Beam for Boiler No. 04 as per drg. |
| 44 | C.I Grade Bar (Stocker) for boiler No. 03 as per drg. No. 91/01/01 suitable for 600 degree C. Temp. |
| 45 | C.I Supporting Plate for window near supper heater coil of Boiler No. 03 Size – Length - 760mm x width 500 mm x Thick 25 mm |
| 46 | C.I tunion bar for New Boiler as per drg. No. 2K1/09/83 |
| 47 | C.I Attachment of Tunion of BoilerNo. 4& 5 as per drg. |
| 48 | Cost Steel Worm No. ofTeeth – 04, Pitch – 64, Bore – 80mm, OD 220 Dia, width 250mm as per drg. No. 90/08/17 |
| 49 | Supply Of Cast Steel Tape Wedge Block for Mill As Per Mill Drawing Suitable For 5000 TCD Plant |
| 50 | Burning Loss @ % On Conversion Basis Item Only |
