|
| 1 | Demolishing R.C.C. work manually/ by mechanical means including stacking of steel bars and disposal of unserviceable material within 50 metres lead as per direction of Engineer - in- charge. (.03 cum each site.) |
| 2 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III)derived from natural sources : 3 graded stone aggregate 20 mm nominal sizederived from natural sources). (1.4 Cum each site) |
| 3 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. (a) Thermo-Mechanically Treated bars of grade Fe-500D or more. (120.00 Kg each site) |
| 4 | Centering and shuttering including strutting, propping etc. and removal of form for : (a) Suspended floors, roofs, landings, balconies and access platform (10.00 Sqm each site) |
| 5 | 6 mm cement plaster of mix : (a) 1:3 (1 cement: 3 fine sand) (12.00 Sqmeach site) |
| 6 | Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. (375.00 Kg each site) |
| 7 | Providing and fixing bolts including nuts and washers complete. (10.00 Kg Cum each site) |
| 8 | Providing and fixing and erection of GI pipe four leg (Three legfor BTS and oneleg for RF anteena) 100 mm diameterG.I pipe of required dia ( B- class, medium weight) Tata,Swastik, Jindal, or equivalent make as approved by engineer in charge including cutting, hoisting, welding,, fixing in position, erection and applying a priming coat of approved steel primer for Roof Top Pole (6 meter) all complete as per direction and satisfaction of E-I-C, i/c dismantaling chipping of roof to make out anchorage and connecting all the four/three pole indivisual and diagonal at two level ,one third of each side with steel angle of 40*40*6mm and makingof hole in Gausate plate ,angle etc all complete workas per reqiurement at the site( Cost of angle and gauset plate nuts and bolt will be provided in other items). (300.00 Kg each site) |
| 9 | Lifting of material of Tower including material for R.C.C. structure for lifting the same upto five storey of building (For four leg) |
| 10 | Arranging electric welding machine at site for fixing of gusset plate angle etc for RTTwith necessary cables and other T&P including the cost of operator and electrodes but excluding the cost of necessary steel sections complete as per direction of Engineer-in-charge. (Note: One day work at one site shall be taken as one job.) |
| 11 | Providing and applying two or more coats with LUXOL high gloss synthetic enamel paint or equivalent to membrs of 6.00 metre RTT every alternate leg in international white and orange as per norms of civil aviation signal i/c applying one or more coat of zinc chromate yellow primer (BISON HB Zinc Phosphate or equivalent) over and above one coat of etch primer (BISON wash primer or equivalent)and necessary scaffolding etc taking all necessary precautions to protect the human lives.all complete as per direction of Engineer in charge |
| 12 | P/F homogeneous Antistatic sheet and skirting of approved company like Krishna Vinyl, wonder Floor etc.in approved pattern on a smooth and damp proof base using rubber equivalent adhesive of approved quality and manufacture like Dunlop- S-758, Fevicol SR-998 or I/c rolling with light woodenroller weighing about 5 kg,i/c repairing of damaged floor where ever necessary all complete as per direction of E.I.C (a) 2.00mm thick sheet (10.00 Sqm each site) |
| 13 | Providing & fixing copper strips 20X.030 mm thick below antistatic flooring as per direction of E/I.(14.00 mtr each site) |
