Tender For Repair/Maintenance Of Steel Furniture At Otm Accommodation At Rms
Tender Value
42 Lakhs
Estimated cost
Bid Submission
19 May 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
rangapahar → Nagaland
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Repair/Maintenance Of Steel Furniture At Otm Accommodation At Rms
BOQ
| Sl. No. | Item Description |
| 1 | Almirah large steel with shelves(FD-1031)- (Qty 50 Nos) Taking out old unsv components of Almirah large steel and S & F new components as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. |
| 2 | GI locks 6 levers with duplicate keys. |
| 3 | Handle chromium plated |
| 4 | Legs made out of 1mm thick MS Sheet |
| 5 | Shelves made out of 1mm thick MS Sheet.. |
| 6 | Fixing of shelves in existing position with appropriate size MS revits. |
| 7 | Repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified. |
| 8 | M & L for de-rusting, denting,scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint \"Satin finish\"(Almirah shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally and externally with spray gun complete all as specified and as directed. |
| 9 | Almirah Medium Steel with Shelves(FD-1032)- (Qty 100 Nos)Taking out old unsv components of Almirah medium steel and S & F new components as per shape and size as existing all as specified and as shown on drawing and as directed by Engr-in-Charge. |
| 10 | GI locks 6 levers with duplicate keys. |
| 11 | Handle chromium plated |
| 12 | Legs made out of 1 mm thick MS Sheet |
| 13 | Shelves made out of 1 mm thick MS Sheet. |
| 14 | Fixing of shelves in existing position with appropriate size MS revits. |
| 15 | Repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified. |
| 16 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint \"Satin finish\"(Almirah shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally & externally with spray gun complete all as specified and as directed. |
| 17 | Locker steel(FD-1029)-(Qty 1000 Nos)Taking out old unsv components of Locker steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 18 | Bow handle chromium plated heavy duty. |
| 19 | Hanging rod 20mm dia CP |
| 20 | Sockets 25mm dia chromium plated with fixing steel screw. |
| 21 | Repair of loose doors by replacing unsv existing hinges, fittings and adjustment for smooth functioning as specified. |
| 22 | Hasp and staple 75mm CP fixed with revits to the shutters. |
| 23 | Tower bolt 75mm welded to the shutter. |
| 24 | Legs made out of 1mm thick MS sheet. |
| 25 | M & L for de-rusting, denting scrapping, filling with putty including preparation of old surfaces and applying one coat of synthetic enamel paint \"Satin finish\"(Locker shall be painted in dual colour. Body shall be painted in Ivory/off white & door shall be painted in Sky blue/Light blue colour) internally and externally with spray gun complete all as specified and as directed by GE/Engr-in-charge. |
| 26 | Book Case Steel(FD-1028)-(Qty 25 Nos)Taking out old unsv components of Book case steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 27 | GI locks 4 levers with duplicate keys. |
| 28 | Bow handle chromium plated |
| 29 | Glass pane 3mm thick. |
| 30 | Fixing of loose shutters in existing position with appropriate size clips and sliding roller as existing and making the sliding shutter for easy moving. |
| 31 | M & L for de-rusting, denting,scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG/Gray internally and externally with spray gun complete all as specified. |
| 32 | Rack six tiers steel 915x610x1905mm(FD-1038)- (Qty 25 Nos).Taking out old unsv components of Rack steel and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 33 | Shelves made out of 1mm thick MS Sheet.. |
| 34 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 35 | Rack side with tray steel(FD-1023)- (Qty 35 Nos)Taking out old unsv components of Rack side and S & F new components as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 36 | Shelves/bottom/top made out of 1 mm thick MS Sheet. |
| 37 | M & L for de-rusting, denting,scrapping, filling with putty including preparation of old steel surfaces and applying one coat of synthetic enamel paint OG internally and externally with spray gun complete all as specified. |
| 38 | Table dining Ors(FD-165)- (Qty 30 Nos)Taking out old unsv components of Table dining ORs and S & F new components in replacement as per shape and size as exiisting all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 39 | Legs made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. |
| 40 | Long stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. |
| 41 | Short stiffener made out of 25mm square steel tube of wall thickness 1.6 mm and welding to the frame. |
| 42 | Hard rubber shoes with inside steel washers for legs. |
| 43 | Top made out of 18mm thick MDF board covered on top with 22 guage aluminium sheet, and fixed to frame with 40 mm steel screw. |
| 44 | M & L for welding to the entire frame and painting to the frame with one coat of synthetic enamel black paint after preparation of steel surface. |
| 45 | Table office clerk steel(FD-1004)- (Qty 100 Nos)Taking out old unsv components of Table office clerk steel and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 46 | Top made of 18mm thick pre-laminated MDF board teak face & provided with and including 4 mm thick teak wood beading all round the top duly polished. |
| 47 | GI lock 4 levers with 2 keys. |
| 48 | Legs made out of 25mm square tube 1.6 mm wall thickness. |
| 49 | M & L for repairing of drawer by replacement of MS channel providing welding & denting. |
| 50 | Hard rubber shoes with inside steel washers for legs. |
| 51 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified. |
| 52 | Table office officer steel(FD-1003)- (Qty 45 Nos)Taking out old unsv components of Table office officer steel and S & F new components in replacement as per shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 53 | Top made of 18mm thick pre-laminated MDF board teak face & provided with and including 4 mm thick teak wood beading all round the top duly polished. |
| 54 | New GI lock 4 levers with 2 keys . |
| 55 | Legs made out of 25mm square tube 1.6 mm wall thickness. |
| 56 | M & L for repairing of drawer by replacement of MS channel providing welding & denting. |
| 57 | Hard rubber shoes with inside steel washers for legs. |
| 58 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray gun one coat of synthetic enamel paint OG, complete all as specified and as directed. |
| 59 | Table Steel 900 x 600 x 760mm without drawer(FD-1007)- (Qty 20 Nos)Taking out old unsv components of TableSteel 900 x 600 x 760mm and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 60 | Top made of 18 mm thick pre-laminated MDF board teak face & provided with and including 4 mm thick teak wood beading all round the top duly polished. |
| 61 | Legs made out of 25 mm square tube 1.6 mm wall thickness. |
| 62 | Long bottom stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame. |
| 63 | Short stiffner made out of 25 mm square steel tube of wall thickness 1.6 mm and welding to the frame. |
| 64 | New hard rubber shoes with inside steel washers for legs. |
| 65 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applying by spray painting one coat of synthetic enamel paint OG, complete all as specified. |
| 66 | Trestle store room steel(FD-1043)- (Qty 75 Nos)Taking out old unsv components of Trestle store room and S & F New Components in replacement as per Shape and size as existing all as specified and shown on drawing and as directed by Engr-in-Charge :- |
| 67 | M & L for de-rusting, denting, scrapping, filling with putty including preparation of old steel surfaces and applyingone coat of synthetic enamel paint black, complete all as specified. |
AI Tender Summary
Tender Timeline
Apr 28, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 19, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 21, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender