|
| 1 | M & L for taking down Street/ Perimeter light fittings of any descriptions from any height after disconnecting electric connections and opening cover and checking of light fittings for serviceability and repaired as required and re-fixing the light fittings in existing position after repair and providing connections including replacement of defective/ unserviceable spares/ parts etc as required to make the fittings in smooth serviceable condition and testing complete all as specified and as directed. (Note: (i) Replacement of unserviceable parts shall be measured and paid seperately as \"supply only\" (ii) Replacement of minor spares/ parts such as nuts, bolts & washer, worn out cables as per existing size etc shall deemed to be included in the unit quoted rate) |
| 2 | Supply only Driver (as approved) suitable forLED flood light fittings of 120 Watt complete all as specified and directed. |
| 3 | Supply only Solar light Battery, 12 Volts, 150 AH, Dry Gel (as approved) suitable for 3 days backup capacity complete all as specified and directed. |
| 4 | Supply only PVC solar street light battery box not less than 2mm thick all as per site requirement but size not less than 520mm x 230mm and height 280mm including necessary mounting hardware materials such as nuts, bolts washers etc complete all as specified and directed. |
| 5 | Supply only high conversion efficiency based solar photovoltaic module of capacity 100W, 12V of dimensions 1017x670x35mm complete all as specified and directed. |
| 6 | Supply only heat shrink sleeve wrap tube made out of quality polyolefin plastic material providing excellent insulation between phases/neutral/earth wire from 10sqmm to 16sqmm LT XLPE cables complete all as specified and directed. |
| 7 | M & L for taking down High mast light fittings of any descriptions from any height after disconnecting electric connections and repair the same by applying greasing, oiling etc as required and re-hoisting light fittings after reqpair including replacement of defective/ unserviceable spares/ parts etc as required to make the fittings in smooth serviceable condition and testing complete all as specified and as directed. (Note: (i) Replacement of unserviceable parts shall be measured and paid seperately as \"supply only\" (ii) Replacement of minor spares/ parts such as nuts, bolts & washer, worn out cables as per existing size etc shall deemed to be included in the unit quoted rate) |
| 8 | S & F in repair LED 120 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium, IP66, suitable for highlighting architectural facade and general purpose lighting with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell\"s Cat No. JETAIRISFL120WLED757APWBLTG or equivelant of make as per list of manufacturer) |
| 9 | S & F in repair 40 Watt, 230 Volts AC Post Top Lantern, New generation, IP 65 LED post-top family, energy saving, environmental friendly, long life aesthetically designed with symmetrical light distribution, spun aluminium landscape luminaire with high power LEDs as light source. Clear Cover offers bright illumination for different applications with driver and lamp, fixing accessories and connecting up with suitable copper conductor complete all as specifiedand directed. (Make: Havell\"s Cat No. RUBYPT40WLED757PSYMTOPC or equivelant of make as per list of manufacturer) |
| 10 | S & F in repairs 08 Watt, LED Bollard light fittings, New generation, energy saving, environmental friendly, long life aesthetically designed aluminium landscape IP 65 luminaire for diffused lighting with high power LED as light source. including lamp and making good disturbed surfaces complete all as specifiedand directed. (Make: Havell\"s Cat No. BAMBOOBL8WLED830SSYMTOPCM or equivelant of make as per list of manufacturer) |
| 11 | S & F in repair LED 100 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell\"s Cat No. JETAIRISFL100WLED757ARWBLTGor equivelant of make as per list of manufacturer) |
| 12 | S & F in repair LED 200 Watt flood light luminaire, Energy saving, environmental friendly, long life, exclusive innovative die-cast aluminium IP66 flood light, suitable for highlighting architectural facade and general purpose lighting. with lamp and all accessories including mounting clamps, bolts, nuts and washers and copper conductor cable of suitable size to fittings of suitable length fixed as in High mast light at any height complete all as specified and as directed. (Make: Havell\"s Cat No. JETAIRISALPHAFL200WLED857PBOLTGor equivelant of make as per list of manufacturer) |
| 13 | Supply, Install, Commissioning and Testing in repair Semi integrated solar Street light fitting, 20 Watt (120 Lm/W), made of aluminium pressure die cast (PDC) housing, IP65 with and including an in built battery of capacity 30 aH connected with and including Solar PV Panel of suitable size mounted on top of the pole and mounting clamp, inbuilt MPPT charge controller and PIR motion sensor for motion detection with connector, pin and accessories complete all as specified and directed. (Make: HPL Model No: HPLLED20WSI75WNP or equivelant of make as per the list of manufacturer\"s) |
| 14 | Supply, Install, Commissioning and Testing in repair Semi integrated solar Street light fitting, 30 Watt (120 Lm/W), made of aluminium pressure die cast (PDC) housing, IP65 with and including an in built battery of capacity 30 aH connected with and including Solar PV Panel of suitable size mounted on top of the pole and mounting clamp, inbuilt MPPT charge controller and PIR motion sensor for motion detection with connector, pin and accessories complete all as specified and directed. (Make: HPL Model No: HPLLED30WSI75WNP or equivelant of make as per the list of manufacturer\"s) |
| 15 | Dismantling of unserviceable broken LT steel pole/Strut any size including demolition of foundation as required and making good disturbed surface complete all as directed. (Note : Earth work wherever invloved shall be measured and paid separately) |
| 16 | M & L for Steel tubular swaged poles complete with cast iron base plate, finial taper plug, bolts, nuts & screws as specified type 410 SP-31 (9.0 metres long) including providing one coat of aluminium paint over coat of red oxide zinc crome primer and providing 03 Nos of band/ strap with paint black/ yellow colour, 300mm apart from plinth block and numbering of pole and one coat of black bitumenous paint over a coat of red oxide zinc chrome primer to embedded portion of pole complete all as specified and directed. (Note : Excavation and Earth work shall be measured and paid separately) |
| 17 | S & F in repairs IP 66 junction box made of impact resistance polycarbonate & heat resistant materials of size 205x255x112mm mm, dust proof, water tight, light weight, acid resistant, corrotion proof insulated and shock proof, fire retardant, self extinguishing, helogen & silica free non toxic material, UV resistant with internally embedded gasket and fitted with required terminals alongwith type test certificate and veryfied by glow-wire test in accordance with IEC60695-2-11 complete all as specified and directed directed. (Make : HENSEL, Cat No :KF 2500 H or equivalent model of make as per list of manufacturer) |
| 18 | M & L Earthing complete with GI earth plate electrode 600 mm x 600mm x 6 mm thick burried directly in ground vertically to a depth not less than 2.25 m below ground level with the top edge of earth plate at depth not less than 1.5 m below ground level connected with galvanised earth strip of size 32x6mm by means of bolts, nuts,check nuts and washers protected by 40mm bore light grade GI pipe, funnel with 20mm bore GI medium grade pipe for watering, wire mesh, including concrete pit in PCC (1:3:6) type C-1, with 40 mm thick Pre-cast R.C.C. (1:2:4) type B-I cover slab (reinforced with 8 mm dia deformed bar @ 10 cm C/C both ways and suitable handle of 12 mm dia round bar),including providing charcoal or coke and common salt in alternate layers of 15 cm compacted thickness all around the earth electrode, with funnel, wire mesh, aluminium lugs, complete in all respect and other end connected with main switch board or Earthing test point as directed,including necessary earth work and disposal of spoil to a distance not exceeding 50 metre and necessarytesting on completion inclduing taking down old one complete all as specified and as directed by the Engineer-in-Charge. |
| 19 | Excavation in trenches, not exceeding 1.5 M wide and not exceeding 1.5 M depthfor foundation, trenches for shafts, wells, cesspits, manholes, pier holes, etc. n exc 10sq m on plan and n exc 1.5m in depth and getting out in soft/loose soil complete all as specified and directed. |
| 20 | M & L for Sand cushioning with clean dry sand in trenches for protection of under ground cables (below, above and around the cable laid in trenches) complete all as specified and directed.(Note: Thickness after punning down shall be measured for payment) |
| 21 | Supplying and laying un-reinforced precast concrete cable cover, class LV, type 2 flat, size 300mm x 180mm x 40mm conforming to IS-5820-1970 complete all as specified and directed. |
| 22 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm as in soft/loose soil complete all as specified and directed. |
| 23 | Removing excavated material not exc. 50 m and depositing where directed at a level not exc 1.5 m above the starting pointcomplete all as specified and directed. |
| 24 | M & L for Plain cement concrete 1:4:8, type D-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 25 | M & L for Plain cement concrete 1:3:6, type C-2 (using 40 mm graded stone aggregate) as in foundation, filling and mass concrete, etc complete all as specified and directed. |
| 26 | M & L for plain cement concrete (1:2:4), type B1 (using 20mm graded stone aggregate) as in lintels upto 1.5m clear span, cills, steps; seismic and other similar bands, plinth courses, string courses, lacing courses, parapets and railings upto 60 cm in height, copings, kneelers, apex stones, bed plates, kerbs, water troughs and the like including weathering, slightly rounded or chamfered angles and throating, including necessary formwork complete all as specified and as directed. |
| 27 | Supply, laying, testing and commisoning of cable XLPE insulated screened, PVC bedded, galvanised steel strip or wire armoured, electric power cables (heavy duty) 1100 volts grade with stranded aluminium conductor of size 10 Sqmm 2.0 core, fixing along the poles or passing through pipes or laid under floor of through walls etc jointing and testing including taking out existing unserviceable cable complete all as specified and directed. (Note: Excavation and earth work will be measured and paid seperately) |
| 28 | All as per Serial item No. 27 above but for 16 Sqmm 4.0 Core cable complete ditto |
| 29 | S & F in repair Street light bracket arm of length not less than 1.2 m made out of GI tubing, 40 mm bore, light grade fixed to pole, etc with suitable size flat iron clamp 40x5mm of suitable length, nuts, bolts & washers including painting with two coats of aluminium paint over a coat of red oxide zinc chrome primer complete all as specified and directed. |
| 30 | S & F in repair Street light Digital timer, comprising of incoming cable terminals, MCBs, timer, contactor, outgoing terminal duly prewired and all accessories, housed in Mild steel box, outdoor type of capacity 40 Amps, TPN, 3 Pole, 230 Volts having contactor rating 32Amps, TP and providing necessary connection and testingcomplete all as specified and directed. |
| 31 | S & F in repairs 35 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and lens embedded PC cover having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK08 including lamp and connections complete all as specified and as directed. (Make: Havell\"s Cat No. ENDURASUNDOWNSL35WLED765PASYBOPC or equivelant of make as per list of manufacturer) |
| 32 | S & F in repairs 60 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed.(Make: Havell\"s Cat No. ENDURASUNDOWNSL60WLED765PASYBOTG or equivelant of make as per list of manufacturer). |
| 33 | S & F in repairs 70 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell\"s Cat No. ENDURASUNDOWNSL70WLED765PASYBOTG or equivelant of make as per list of manufacturer) |
| 34 | S & F in repairs 90 Watt LED Street light fittings, New generation energy saving and environmental friendly long life LED street light made up of pressure die cast aluminium housing with high efficiency LED as lighting source and Toughened glass having Bottom Opening seperate driver compartment with IP66 protection and impact resistance of IK07 including lamp and connections complete all as specified and as directed. (Make: Havell\"s Cat No. ENDURASUNDOWNSL90 WLED765PASYBOTG or equivelant of make as per list of manufacturer). |
| 35 | S & F in repair 40 mm bore, steel tubes, galvanised, light grade with all fittings, laid in floor/road crossing/drain etc as in cable protection complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 36 | M & L Sub main wiring with two runs of 2.5 sqmm (Nominal area) single core cable FRLS PVC insulated, multistranded, unsheathed, copper conductor cables 1100 Volts grade drawn throughincluding PVC conduit of suitable size with all accesories and fittings,fixed to wall/ceiling etc including2.5 sqmm (nominal area) single core, FRLS PVC insulated, multistranded, unsheathed, copper conductor as earth wire and duly connected to common earth point complete all as specified and as directed by Engineer-in-charge. (Note : Two run cables and one run of earth wire and one run of PVC conduit will be measured as one length.) |
| 37 | S & F in repair PVC insulated and FRLS PVC Round Sheathed, multi-stranded Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 of size 1.5 Sqmm 3 core nominal cross sectional areacomplete all as specified and directed. |
