Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 03-05-2025 | Technical Bid Condition | Other | 14-05-2025 |
| Sl. No. | Item Description |
| 1 | Design, supply, testing and commisioning of 8 metres Mini mast lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessary galvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the7 nos. LED luminaries as below and The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 2 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works.). |
| 3 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 4 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 3 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 5 | Vellai Gopuram (East side) Front LHS - 1 NoVellai Gopuram (East side) Front RHS - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 6 | Design, supply, testing and commisioning of 8 metres Mini mast lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the6 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 7 | a)Rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 21,250 lumens and intensity not less than 2,95,500 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 10° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no.(The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 8 | b)rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 9 | Vellai Gopuram (East side) Front LHS - 1 NoVellai Gopuram (East side) Front RHS - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 10 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 5 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 11 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 12 | b)rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 13 | d) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. . The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 14 | Vellaigopuram Backside LHS - 1 NoVellaigopuram Backside RHS - 1 NoNorth Gopuram Back 1st row - 2 No\"sNorth Gopuram Back 2nd row - 2 No\"sTotal - 6 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 15 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 6 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 16 | a) Supply of rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,000 lumens and intensity not less than 98,400cd , and it shall have minimum 72 high power LED\"s . Fixture shall be available with architectural optics withchoice of beam angles of 10° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. -2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 17 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 18 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works). |
| 19 | Vellaigopuram Backside - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe DateOf handing over of Works. |
| 20 | Supply and Fixingof high impact resistance well glass light with 3000K/4000K.The luminarie housing material shall be pressure die cast aluminium with PC diffuser.The system wattage shall be less than 40W/35W and system lumen output should not less than 4000lm. CRI shall be greater than 80 with SDCM<5. Fixture shall equipped with mechanical impact of minimum IK08, with IP65 and Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Date of handing over of Works. |
| 21 | Vellai Goupuram Nilai -Front - 10 No\"sVellai Gopuram Nilai -Back - 10 No\"s Sri Ranga Sri RangaGopuram Nilai -Front - 6 No\"sSri Ranga Sri RangaGopuram Nilai -Back - 6 No\"sNorth Gopuram Nilai -Front - 5 No\"sNorth Gopuram Nilai -Back - 5 No\"sMain Rajagopuram Nilai -Front - 15 No\"sMain Rajagopuram Nilai -Back - 15 No\"sKarthigai Gopuram - Front - 4 No\"sKarthigai Gopuram - Back - 4 No\"sTotal - 80 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 22 | Design, supply and fixing of Rectangular Aluminium square pipe with suitable supports and necessary bolts and nuts ( Framedesign as per the instruction from the site engineer) with 12 nos. LED Linear DC light and External Driver (IP rate 66) in suitable weather proof box as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 23 | Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 24 | Vellai Gopuram KalasamFront - 1 NoVellai Gopuram KalasamBack - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 25 | Design, supply and fixing of Shell Developer Two channel Rubber cable protector of size (Length -900mm, Width-250mm, Height -48mm, Channel width -36mm, Channel Height -36mm ±10 )by 3M VHB adhesive tape for rigid fixing to run the copper cablewith 19 nos.LED fixtures and The rate quoted Must be inclusive of free Annual maintenance and cost of spares for three years from the date of completion of work and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 26 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 36W at full load and system lumen output of not less than 2300 lumens and intensity not less than 7,600cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of of 15°- 20°x 35°-40° elptical beam.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 27 | b) Supply of outdoor IP66 rated 24V/ 300W driver or SMPS to provide the supply to the above LED. XLG-300-4- nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 28 | Vellai Gopuram Bottom Front side - 2 No\"sTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 29 | Design, supply and fixing of Shell Developer Two channel Rubber cable protector of size (Length -900mm, Width-250mm, Height -48mm, Channel width -36mm, Channel Height -36mm ±10 )by 3M VHB adhesive tape for rigid fixing to run the copper cablewith 39 nos.LED fixtures and The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 30 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 36W at full load and system lumen output of not less than 2300 lumens and intensity not less than 7,600cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of of 15°- 20°x 35°-40° elptical beam.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 31 | b) Supply of outdoor IP66 rated 24V/ 300W driver or SMPS to provide the supply to the above LED. XLG-300-8- nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 32 | Vellai Gopuram Bottom Bottom side - 2 No\"sTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 33 | Supply and fixing of following LED luminaire on suitable AI frame and ( the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 34 | Supply of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 70watt 8000 lumen, min efficacy 110lm/w, Corelated Color Temp 3000k,CRI>70, dual optics glass + PC lens.Fixture shall equipped with mechanical impact of minimum IK07, Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 35 | Ramanuja sannathi Gopuram - 8 No\"sTotal - 8 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 36 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 3 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 37 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works) |
| 38 | b) Supply of outdoor IP66 rated 24V/ 150W driver or SMPS to provide the supply to the above LED. XLG-150-1- no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works) |
| 39 | Ramanuja sannathi - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 40 | Design, supply, testing and commisioning of 8 metres Mini mast lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the5 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 41 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 42 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 43 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixtureshall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 44 | Sri Ranga Sri Ranga Gopuram-Front - 2 No\"sTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 45 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 3 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 46 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 47 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 48 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 49 | Sri Ranga Sri Ranga Gopuram -Front -LHS - 1 NoSri Ranga Sri Ranga Gopuram -Inner side-LHS - 1 NoSri Ranga Sri Ranga Gopuram -Inner side-RHS - 1 NoTotal - 3 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 50 | Design, supply, testing and commisioning of 8 metres Mini mast lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the3 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 51 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 52 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 53 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 54 | Sri Ranga Sri Ranga Gopuram-Front -RHS - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 55 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 4 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 56 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 57 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyesterpowder coating finish with Tilting angle shall be ±90°, systemwattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works) |
| 58 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 59 | Sri Ranga Sri Ranga Gopuram -Inner Back side-LHS - 1 NoSri Ranga Sri Ranga Gopuram -Inner Back side-RHS - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 60 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 3 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 61 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 62 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 63 | Sri Ranga Sri Ranga Gopuram -Inner Back side-Centre - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 64 | Design, supply and fixing of Rectangular Aluminium square pipe with suitable supports and necessary bolts and nuts ( Framedesign as per the instruction from the site engineer) with 8 nos. LED Linear DC light and External Driver (IP rate 66) in suitable weather proof box as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 65 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 66 | Sri Ranga Sri RangaGopuram KalasamFront - 1 NoSri Ranga Sri RangaGopuram KalasamBack - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 67 | Design, supply and fixing of Rectangular Aluminium square pipe with suitable supports and necessary bolts and nuts ( Framedesign as per the instruction from the site engineer) with 5 nos. LED Linear DC light and External Driver (IP rate 66) in suitable weather proof box as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 68 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 69 | b) Supply of outdoor IP66 rated 24V/ 300W driver or SMPS to provide the supply to the above LED. XLG-300-1- no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 70 | Sri Ranga Sri RangaGopuram -Yaali Bottom Front - 1 NoSri Ranga Sri RangaGopuram -Yaali Bottom Back - 1 NoKarthigai Gopuram - Front - 1 NoKarthigai Gopuram - Front - 1 NoTotal - 4 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 71 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 4 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 72 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 73 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 ratedmale/female connectors for DMX through wiring Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 74 | Karthikai Gopuram -Front - 4 No\"sKarthikai Gopuram -Back - 4 No\"sTotal - 8 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 75 | Supply and fixing of surface mounted, exterior-rated LED linearstrip light with 57W / 5m roll with 1100lm/m luminaire with all the necessary accesories as below that is designed for grazing architectural lighting applications waterproof and anti-dust LED strips. It shall be sealed with Glue-injected with polyurethane (PU). SDCM<5 and CCT 2500K or 3000K, Robust Design & IP68 rating for outdoor use. Luminaire has input voltage 24VDC, Operating temperature -40°C to 50°C, IP68 & IK06 protection, Lumen maintenance of 30,000 hrs @ L50 at 35°C. on suitable aluminum profile with suitable clamp and accessories and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 76 | Near Anjaneyar sannathi wall - 10 No\"sTotal - 10 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 77 | Supply and fixing of outdoor IP66 rated 24V/ 150W driver or SMPS to provide the supply to the above LED strip ELG-150-24 with suitable weather proof enclosure. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 78 | statue around pragaram- 5 No\"sTotal - 5 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 79 | Supply and fixing of following LED luminaire on suitable AI frame Supply of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 100watt 11000 lumen, min efficacy 115lm/w, Corelated Color Temp 3000k,CRI>70, dual optics glass + PC lens.Fixture shall equipped with mechanical impact of minimum IK07, Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 80 | Sengamalanachiyar sannathi Roof - 5 No\"sAindu kuzhi Mundru VasalGopuram - 5 No\"sParamapatham Gate Front,Back and side - 8 No\"sTotal - 18 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 81 | Design, supply, testing and commisioning of 8 metres Mini mast lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the5 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 82 | a) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 62,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 83 | b) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,700 lumens and intensity not less than 18,100cd, and it shall have minimum 72 high power LED\"s.Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimensionshall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 2 nos (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 84 | c) rectangular shaped single headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 150W at full load and system lumen output of not less than 7,400 lumens and intensity not less than 9,800cd, and it shall have minimum 72 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 570 mm with bracket and weight not more than 7.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity.- 1 no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 85 | North Gopuram Front LHS - 1 NoNorth Gopuram Front RHS - 2 No\"sTotal - 3 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 86 | Design, supply, testing and commissioning of Pedestal ofsuitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 87 | Rectangular shaped single headed exterior rated architectural and landscape flood light with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 100W at full load and system lumen output of not less than 7,600 lumens and intensity not less than 4,900cd, and it shall have minimum 45 high power LED\"s. Fixture shall be available with architectural optics withchoice of beam angles of 60° Extra beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 150 x 140 x 410 mm with bracket and weight not more than 5.5kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 88 | Perumal vimanam- 8 No\"sTotal - 8 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 89 | Design, supply, testing and commissioning of Pedestal ofsuitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 90 | Supply of linear exterior rated architectural and landscape grazing light with 2700K CCT LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, with Tilting angle shall be+15° to -90° and system wattage shall be less than or equal to 80W at full load and system lumen output of not less than 4000 lumensand intensity not less than 13,000cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with architectural optics with choice of beam angles of 15°- 20°x 35°-40° elptical beam.Fixture dimension shall be not larger than 1000 x 60 x 65 mm without bracket and weight not more than 4.5kgs. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Luminarie should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C and startup temperature range of -35°C to 50°C. Fixture shall have auto-ranging input voltage for 120 – 277 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementof Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 91 | Perumal Gopuram- 4 No\"sTotal - 4 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 92 | Design, supply, testing and commissioning of Pedestal ofsuitable concrete arrangments on the roof top to fix the 1 no. LED lights ( Pedetal design as per the instruction from the site engineer) . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementof Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 93 | a) Supply of High Pressure Die Cast Aluminium hosuing SMD LED Floodlight Luminaire of 70watt 8000 lumen, min efficacy 110lm/w, Corelated Color Temp 3000k,CRI>70, dual optics glass + PC lens.Fixture shall equipped with mechanical impact of minimum IK07, Class I. The luminarie line Frequency 50 HZ,power factor >0.95, THD<10% at full load. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementof Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 94 | Perumal Gopuram- 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 95 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 26 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below andthe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementof Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 96 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 24W at full load and system lumen output of not less than 1600 lumens and intensity not less than 4,600cd, and it shall have minimum 24 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of mid 30° x 30°.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 97 | b) Supply of outdoor IP66 rated 24V/ 150W driver or SMPS to provide the supply to the above LED. XLG-150-3- no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 98 | Rajagopuram Kalasam -Front - 1 NoRajagopuram Kalasam -Back - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 99 | Supply and fixing of following LED luminaire on suitable AI frameasbelow and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 100 | a) Supply of compact size linear exterior rated architectural and landscape grazing light with 2700K LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, system wattage shall be less than or equal to 36W at full load and system lumen output of not less than 2300 lumens andintensity not less than 7,600cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with high power LED and architectural optics with choice of beam angles of of 15°- 20°x 35°-40° elptical beam.The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and Clear tempered glass cover for better illumination. Fixture dimension shall be not larger than 1000 x 40 x 90 mm with bracket and weight not more than 1.6kgs. Luminaire should have IP67 male/female connectors for through power + signal connection. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture operating input voltage shall be 24V DC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 2 pole flat cable L=15cm, 2x1.5mm2 with connectors.-4 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 101 | b) Supply of outdoor IP66 rated 24V/ 150W driver or SMPS to provide the supply to the above LED. XLG-150-1- no. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 102 | First Nilai Nithirai perumal statue - 2 No\"sTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 103 | Design, supply and fixing of Shell Developer Two channel Rubber cable protector of size (Length -900mm, Width-250mm, Height -48mm, Channel width -36mm, Channel Height -36mm ±10 )by 3M VHB adhesive tape for rigid fixing to run the copper cablewith 35 nos.LED fixtures as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 104 | a) Supply of linear exterior rated architectural and landscape grazing light with 2700K CCT LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, with Tilting angle shall be+15° to -90° and system wattage shall be less than or equal to 80W at full load and system lumen output of not less than 4000 lumensand intensity not less than 13,000cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with architectural optics with choice of beam angles of 15°- 20°x 35°-40° elptical beam.Fixture dimension shall be not larger than 1000 x 60 x 65 mm without bracket and weight not more than 4.5kgs. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Luminarie should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C and startup temperature range of -35°C to 50°C. Fixture shall have auto-ranging input voltage for 120 – 277 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires. -35 nos. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 105 | Rajagopuram -Front Bottom - 2 No\"sRajagopuram -BackBottom - 2 No\"sTotal - 4 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 106 | Design, supply, testing and commisioning of 16 meter static high mast with platforms and other necessary accessories along with monkey ladder. lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the16 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 107 | a) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 21,250 lumens and intensity not less than 2,95,500 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 10° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 4 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 108 | b) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 22,300 lumens and intensity not less than 1,88,400 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be withAnti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket andweight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 4 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 109 | c) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 23,100 lumens and intensity not less than 54,300 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 4 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 110 | d) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 15,400 lumens and intensity not less than 36,200 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall benot larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 4 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 111 | Rajagopuram Front RHS - 1 NoRajagopuram Back LHS - 1 NoRajagopuram Back RHS - 1 NoTotal - 3 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 112 | Design, supply, testing and commisioning of 12 meter static high mast with platforms and other necessary accessories along with monkey ladder. lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. and foundation suitable to the safe bearing capacity of the soil at 12 T/m2 at 1.5m depth of below ground level and necessarygalvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the8 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 113 | a) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 14,800 lumens and intensity not less than 1,25,600 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 No\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 114 | b) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 15,400 lumens and intensity not less than 36,200 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 3 No\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 115 | c) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 14,800 lumens and intensity not less than 19,700 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 3 No\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 116 | Rajagopuram LHS Side - 1 NoRajagopuram RHS Side - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 117 | Design, supply, testing and commisioning of 12 meter static high mast with platforms and other necessary accessories along with monkey ladder. lighting unit (Wipro / Philips / Crompton make or equivalent)complete with Hot dip Galvanised and suitable for 45 m/sec wind velocity and above . The mini mast structure should have hend and hence . The Erection of High mast by providing concreting 1.2.4 mix RCC masonry foundation pedestal. The RCC pedestal projection should be 30cm above the ground level. andfoundation suitable to the safe bearing capacity of the soil at 12T/m2 at 1.5m depth of below ground level and necessary galvanised bolts, nuts, washers and anchor plate and template etc. complete as per standard specification of IS-875-1987 . (approved by PWD) and the Anodised steel angle of 6mm thick frame arrangment (designed as per the instruction from the siteengineer )at the top of the pole suitable for mounting the11 nos. LED luminaries as below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 118 | a) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 14,800 lumens and intensity not less than 1,25,600 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 2 No\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 119 | b) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 23,100 lumens and intensity not less than 54,300 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 6 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 120 | c) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 22,300 lumens and intensity not less than 29,500 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 3 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 121 | Rajagopuram Front LHS - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 122 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 15 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 123 | a) Supply of rectangular shaped modular double headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 300W at full load and system lumen output of not less than 14,800 lumens and intensity not less than 1,25,600 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 144 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 15° Narrow beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 305 x 570 mm with bracket and weight not more than 16kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 5 No\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 124 | b) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 23,100 lumens and intensity not less than 54,300 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 30° Mid beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 5 no\"s. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 125 | c) Supply of rectangular shaped modular triple headed exterior rated architectural and landscape flood light with RGB with 2700K LED luminaire. The luminaire housing material shall be extruded aluminum with die- cast aluminum end caps,electrostatically applied polyester powder coating finish with Tilting angle shall be ±90°, system wattage shall be less than or equal to 450W at full load and system lumen output of not less than 22,300 lumens and intensity not less than 29,500 cd, and it shall have minimum 72 high power LED\"s per head and total shall be minimum 216 no\"s. Fixture shall be available with architectural optics withchoice of beam angles of 45° Wide beam. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Fixture dimension shall be not larger than 235 x 480 x 570 mm with bracket and weight not more than 21kgs. Luminaire should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C. Fixture shall have auto-ranging input voltage for 220 – 240 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires and 4 pole round cable L=50cm, 4x0.5mm2 for DMX connectivity. - 5 no\"s. . (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 126 | Rajagopuram Front Mandapam - Center - 1 NoRajagopuram Back Mandapam - Center - 1 NoTotal - 2 No\"sThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 127 | Design, supply, testing and commissioning of Pedestal type channel made up of anodised aluminium angle of 6mm thick frame with leg supports and side supports and suitable concrete arrangments on the roof top to fix the 8 nos. LED lights ( frame design as per the instruction from the site engineer) suitable for 45 m/sec wind velocity and above . The structure should have hend and hence and theLED luminaries detailsas below and the ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 128 | a) Supply of linear exterior rated architectural and landscape grazing light with 2700K CCT LED luminaire. The luminarie housing material of extruded aluminum with die-cast aluminum end caps, electrostatically applied polyester powder coating finish, with Tilting angle shall be+15° to -90° and system wattage shall be less than or equal to 80W at full load and system lumen output of not less than 4000 lumensand intensity not less than 13,000cd, and it shall have minimum 36 high power LED\"s. Fixture shall be available with architectural optics with choice of beam angles of 15°- 20°x 35°-40° elptical beam.Fixture dimension shall be not larger than 1000 x 60 x 65 mm without bracket and weight not more than 4.5kgs. The luminaries shall be with Anti-aging and anti-UV high optical efficiency PMMA lens and clear tempered glass for better illumination. Luminarie should have IP67 rated male/female connectors for DMX through wiring. Fixture shall operate in a temperature range of -40°C to 50°C and startup temperature range of -35°C to 50°C. Fixture shall have auto-ranging input voltage for 120 – 277 VAC. Lifetime should be at least 50,000 burning hours at L70 at 35 degree centigrade with total IP66 protection. Fixture shall equipped with mechanical impact of minimum IK06. The luminarie shall have 3 pole round cable L=50cm, 3x1.0mm2 with flying wires. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 129 | Raja Gopuram Inside Pathway - 1 NoTotal - 1 NoThe ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works. |
| 130 | Design, supply, testing and commissioning of Supply of 10 pieces of 2mtr factory made 2P /4P/ 5Pmale to female cable to connect the DMX enabled data line for better connectivity. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 131 | Supply and run of 3 core 2.5 sq.mm PVC armoured LTUG copper cable in existing HDPE pipe. |
| 132 | Supply and run of 3 core 2.5 sq.mm PVC armouredcopper cable in existing HDPE pipe. |
| 133 | supply and run of 3 core 1.5 sq.mm PVC sheathed copper cable from Junction box to LED fixtures. |
| 134 | Supply and run of 3 core 2.5 sq.mm PVC unsheathed copper cable in suitable PVC rigid on wall/ceiling with special clamp. |
| 135 | supply and run of 3 core 2.5 sq.mm PVC sheathed copper cable from Junction box to LED fixtures. |
| 136 | Supply and run of CAT6 armoured HDPE cable in existing HDPE pipe/ cable tray with suitable clamp. |
| 137 | supply and run of HDPE pipe of size 50mm/38mm with suitable clamp on existing tray /wall/ ground. |
| 138 | Supply and fixing of 4 way Vertical Triple pole and neutral MCB sheet steel enclosure distribution board with double door (metal) with 1 no. 63A 4P MCB Isolator as incoming and 12 nos. 6A to 32A SP MCB as outgoing on suitable angle iron frame on wall with earth connection only. Higher End |
| 139 | supply and Installation of 15 KVA Three phase Microprocessor controlled Air cooled unbalanced Electronic servo voltage stablizer with High/Low voltage cut off and single phase preventer with Builtin manual bypass arrangments(The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 140 | supply and Installation of 75 KVA Three phase Microprocessor controlled Air cooled unbalanced Electronic servo voltage stablizer with High/Low voltage cut off and single phase preventer with Builtin manual bypass arrangments(The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works.). |
| 141 | Supply and Installation of 1 KVA single phase UPS 2 hours backup with connection . (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacement of Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 142 | Supply and Installation of 4U rack for controller unit. |
| 143 | Supply and fixing of 63A 4P MCB with sheet steel enclosure in flushwall with earth connection (Higher end). |
| 144 | supply and fixing of weather proof SMC Junction Boxof size 130mm x 130mm x 77mm to house connector with suitable gland for LED fixtures. |
| 145 | supply and fixing of weather proof SMC Junction Boxof size 104mm x 104mm x 70mm to house connector with suitable gland for LED fixtures. |
| 146 | Special Plate earthing arrangments |
| 147 | Supply and Run of 1 of No.8 SWG copper wire in suitable PVC rigid pipe on wall / floor / ground for earth connection |
| 148 | Supply and run of 25mm x 6mm tinned copper flat with necessary clamps / supports on wall / floor / ground for earth connection |
| 149 | Supply and run of 25mm x 6mm GI Flat Down Condutor with necessary clamps / supports on wall / floor / ground for earth connection |
| 150 | Supply and Laying of 4 core 6 sq.mm PVC armoured LTUG copper in suitable HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good |
| 151 | Supply and fixing of brass cable gland for4x6 sq.mm. PVC armoured LTUG copper cable with earth connection |
| 152 | Supply and Run of Hot Dip Galvanised cable tray of 150mm x 50mmonroof top with necessary masonry arrangments |
| 153 | Supply and Laying of 3 1/2 x 150 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 154 | Supply and clarnping of 3 1/2 x 150 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 155 | Supply and clarnping of 3 1/2 x 150 sq.mm. PVC LTUG armoured cable in suitable GI pipe on post or on wall with MS clamps |
| 156 | Supply and fixing of brass cable gland for 3-1/2 x 150 sq.mm. PVC armoured LTUG cable with earth connection |
| 157 | Supply and providing cable end termination of 3-1/2 x 150 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc., with electrical connection complete |
| 158 | Supply and fixng of TNEB meter board suitable for 3 phase 200A service connection made up of suitable angle iron frame work of size 3 feet x 2 feet using angle iron of size 1-1/2\" x 1-1/2\" x 1/4\" rigidly fixed on wall covered with hylem sheet of size 3 feet x 2 feet of 12mm thickness with necessary bolts and nuts supports and supply and fixing of 3 Nos. 200A fuse units (500V), 1 No. neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 19/16 PVC insulated copper wire with earth connection complete |
| 159 | Supply and fixing of 200A TPN sheet steel double break switch with HRC fuses and neutral on suitable angle iron frame work with MS cable entry boxes and with earth connection only |
| 160 | Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 161 | Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps |
| 162 | Supply and clarnping of 4 x 16 sq.mm. PVC LTUG armoured cable in suitable GI pipeon post or on wall with MS clamps |
| 163 | Supply and fixing of brass cable gland for 4 x 25 sq.mm. LTUG armoured cable with earth connection |
| 164 | Supply and Laying of 4 x 6 sq.mm. PVC armoured LTUG copper cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. |
| 165 | Supply and clarnping of 4 x 6 sq.mm. PVC LTUG armoured copper cable on post or on wall with MS clamps |
| 166 | Design, Supplytesting and commissioningof controller to author, configure, and control dynamic LED light shows for DMX lighting networks. The controller with two universe ofDMX ports control up to 340 light addresses, Works as a stand-alone or computer-driven controller, Secure Digital (SD) card drive for flexible show storage , USB 2.0 interface for downloading shows and configuring from attached PC or Mac, Simple installation and wiring is required, Flexible, adaptable mounting options are expected, Should be provided with light show authoring software, Direct line voltage power supports 100 — 240 VAC , Six configurable effects — Using light show authoring software to select from six effects, adjust effect settings, such as color, speed, and brightness etc as reqd.(The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works.) |
| 167 | Design, Supply ,testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify thesignaland supportingbi-directionalcommunicationsfordiscovery,addressingandDMX control of light fixtures.This unit takes the incoming DMX/RDM signal and splits the signal into six separate output channels allowing for expanding the number of devices controlled from 32 to 6 X 32. The output terminals are electronically isolated from the input & RDM-through port and share a common ground reference. All six output ports have an independent output driver to boost the DMX/RDM signal. Operating temperature shall be -10° to 35°C. The maximum power consumption shall be less than 4.5W and input voltage shall be 12-24V DC.(The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 168 | Design, Supply , testing and commissioning of compact DMX signal amplifier that takes the incoming DMX512/RDM signal and amplify the signal into long distance transmission. The housing shall be aluminum with block color finish. This compact signal amplifier supports magnetic isolation protection, protects the controllers and ensures that the DMX signal can be normally transmitted to various luminaires, improving the reliability and stability of the entire control system. The amplifier should able to transmit the DMX signal up to 100mtr or upto 64 luminaries with out signal loss. Operating temperature shall be -20° to 50°C. The maximum power consumption shall be less than 1.5W and input voltage shall be 12-24V DC. The device should be supplied as per technical specification. (The ratequoted areinclusiveof 3 years freemaintenanceandfree replacementOf Luminaries and Sparesfor3 Years fromthe Dateof handing over of Works). |
| 169 | Supply and fixing of brass cable gland for 4 x 6 sq.mm. LTUG armoured copper cable with earth connection |
| 170 | Supply and run of 3 core 1.5 sq.mm PVC unsheathed copper cable in suitable PVC rigid on wall/ceiling with special clamp. |
| 171 | Supply and clarnping of 4 x 6 sq.mm. PVC LTUG armoured copper cable in GI Pipe on post or on wall with MS clamps |
| 172 | Sub Total |
| 173 | GST @ 18% |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
