Providing, Supplying And Installation Of Furniture Work In Bedroom And Kitchen At Various Places At Mehsana, Patan, Banaskantha, Sabarkantha And Arvalli District Under Mehsana Division.(1St Attempt)-Providing & Fixing Shutters & Frame made of 16 mm thick Calibrated HDF Board , Fixed on Frame with exposed side 0.8mm thick decorative high pressure lamination sheet of plain / wood grain in gloss / matt/ suede finish with high density protective surface layer confirming to IS :2046 and other side with 0.8 mm thick balancing lamination , pressed on hot-press method with approved adhesives including preparation of base surface. All the edges must be sealed with 22*2 mm PVC/ABS (poly Vinyle chloride / Acrylonitrile Butadiene Styrene) edge bands , glued on computer controlled automatic Edge bending machine with pre- milling operation using hot-melt glue while pre-milling function putting on mode. 1 Providing, Supplying and Fixing 16MM thick HDF Board of Approved Brand. The rate inclusive with labours, Adhesive,Cutting and Fixing As per drawing and as Directed by engineer-in-charge. 2 Providing, Supplying and Fixing 6MM thick HDF Board of Approved Brand. The rate inclusive with labours, Adhesive,Cutting and Fixing As per Specified in drawing and as Directed by engineer-in-charge. 3 Providing, Supplying and Fixing 0.80 MM thick laminate of Approved Brand (Figured Laminate For Out Side), The rate inclusive of Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-in-charge. 4 Providing, Supplying and Fixing 0.80 MM thick laminate of Approved Brand(Plain White Laminate inner Side), The rate inclusive of Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-incharge. 5 Providing, supplying and fixing PVC/ ABS edge Beading 22 x 2 mm thickness of Approved Brand. Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-in-charge. 6 Providing, supplying and fixing PVC/ ABS edge Beading 22 x 0.8 mm thickness of Approved Brand. Adhesive,Cutting and Fixing of Laminate by hot melt glue process As per drawing and as Directed by engineer-in-charge. 7 Supplying & Fixing & installation of SS Grade 304, Cutlery Basket of Approved Brand of size (470 x 535 x 100) mm Approximately with minimum weight 2.765 Kg for kitchen cabinet. Including 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 8 Supplying & Fixing & installation SS Grade 304, Cup & Soucer of Approved Brand of size (470 x 535 x 100) mm Approximately with minimum weight 3.253 Kg for kitchen cabinet.Including 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 9 Supplying & Fixing & installation SS Grade 304, Thali Basket of Approved Brand of size (470 x 535 x 150) mm Approximately with minimum weight 3.751 Kg for kitchen cabinet of Including 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 10 Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved Brand of size (470 x 535 x 100) mm Approximately with minimum weight 2.533 Kg for kitchen cabinet of Including 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 11 Supplying & Fixing & installation SS Grade 304, Plain Basket of Approved Brand of size (470 x 535 x 150) mm Approximately with minimum weight 3.010 Kg for kitchen cabinet of Including 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 12 Supplying & Fixing SS Grade 304, PULL OUT of Approved Brand with size (200 x 485 x 430) mm Approximately with minimum weight 2.080 Kg for kitchen cabinet ofIncluding 20 DRSL(35 KG) Soft Closed channel of Approved Brand As per drawing and as Directed by engineer-in-charge. 13 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet Handle of Approved Brand made of Ø 10 mm steel bar and The length of handle should be of 160 mm, minimum weight 136 gram perfect center-to-center hole and extremely even surface and should be provided with 2Nos. of high quality nickel coated Philips four head screw etc. complete As per drawing and as Directed by engineer-in-charge. 14 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Cabinet Handle of Approved Brand made of Ø 10 mm steel bar and The length of handle should be of 96 mm, minimum weight 92 gram perfect center-to-center hole and extremely even surface and should be provided with 2Nos. of high quality nickel coated Philips four head screw etc. complete As per drawing and as Directed by engineer-in-charge. 15 Providing & Fixing AISI S.S. 304 Grade Stainless Steel Satin Finish Square Tower bolt of Approved Brand with overall length (excluding Bracket) 200 mm and inner bolt of □ 10 mm and outer □ 15X15 mm Sqaure Pipe with necessary S.S. Fixing Screws etc. complete As per drawing and as Directed by engineer-in-charge. 16 Supplying and Fixing Plastic Wardrobe Magnet Catcher Of Approved Brand with Necessary Screws etc . Complete As per drawing and as Directed by engineer-in-charge. 17 Supplying and Fixing High Quality Wardrobe Lock Of Approved Brand with Computerised bras key etc. complete with Necessary Screws etc . Complete as Specified in drawing and as Directed by Engineer in Charge. 18 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of Approved Brand and shape without bearings, approximate size 75 mm X 62 mm X 2 mm etc. complete with S.S. 202 Grade necessary S.S. self taping philip head screws etc. as per drawing and as directed by engineer-in -charge. 19 Providing & Fixing AISI 304 Grade Stainless Steel Satin Finish Door Hinge of Approved Brand and shape without bearings, approximate size 100 mm X 75 mm X 3 mm etc. complete with S.S. 202 Grade necessary S.S. self taping philip head screws etc. as per drawing and as directed by engineer-in -charge. 20 Providing & Fixing of SS 304 Grade pipe of 25 mm dia. 1mm Thick Including End cape necessary S.S. self taping philip head screws etc. as per drawing and as directed by engineer-in -charge. 21 Providing & Fixing of SS 304 Grade bracket of 25 mm dia. Of Approved Brand including necessary S.S. self taping philip head screws etc. as per drawing and as directed by engineer-in -charge. 22 Providing and Laying 15 to 18 mm thick Telephonic Black Granite to be laid on 16 mm thick HDF Plywood with fixing 2 wide granite moulded facia patti on front edge of plateform as per drawing.The Rate inclusive of cost of Granite, Facia Patti and Necessary Adhessive & labor Etc....as Specified in drawing and as Directed by Engineer in Charge. 23 Providing and Fixing Stainless Seel (S.S. 304 grade ) 1mm thick Matt/Satin Finishing Kitchen Sink of over all Minimum size 533 mm X 457 mm X 203 mm Deep having Bowl minimum size 470 mm X 395 mm X 203 mm Required adhesive material.including of 32mm dia C.P. brass waste coupling and 32mm dia rigid PVC waste pipe upto N.T. S.S Kitchen Sink of Approved Brand ( Nirali, Navkar,carysil , krishna) and wall mounted swan neck pillar tap of approved brand (cera - F2013251, Hindware-F 280026,Somany - 272210190131) 24 Providing & Fixing Wall Mounted Sink Cock with Extended Swivel Spout & Wall Flange . Rate are inclusive of all matreials, Labour & Necessary Fittings etc. Complete as per Detailed Drawings, Specifications and as per the Instruction of Engineer In charge. The Model & Make of Sink Cock Shall be as per the Approved Make List of GSPHCL.
