|
| 1 | Supply and Delivery of Procurement of 65 inch (+/-1) or higher,IPS / LED,Less than or Equal to 8 ms Response Time,Aspect Ratio 16: 9,UHD – 3840 (H) x 2160 (V) Resolution,1.07 billion (10-bit) Display Colour ,Contrast Ratio 5000:1, 178° (HV) Viewing Angle,Brightnesswithglass (min) - 450 cd/ m2 or higher ,Lifetime- 50,000 Hours or higher,40 points touch & write,Finger, Passive infrared pen,Infrared recognition,Windows 10 or higher, Linux, Mac, Android, Chrome,Accuracy size +/- 2mm,7 Mohs Toughened Glass, Anti Finger Print technology,Wall hanging accessories with Locker. Suitable for 65” IFP Power Requirement 100V-240V,Power Consumption < 550W,Processor CPU: ARM Cortex-A55 x8 ; GPU: ARM Mali-G52 MP4, Android 12.0 or higher with free update support,RAM 4 GB DDR4 Storage 32 GB,In-Built Audio Amplifier with 2 Sound channel and 2*20W (L speaker + R speaker)HDMI IN (2.0) *3 (rear*2, front*1; 1 of the rear ports supports ARC & CEC),HDMI OUT (2.0) *1,USB USB 2.0: *1 (rear*1 for Android ),USB 3.0: *4 (front x3; rear x1).Type C: *1 (front, USB only),TOUCH OUT (Type B 2.0) *2 (rear*1, front*1),AUDIO IN 1,AUDIO OUT 1,RS232 1,RJ45 IN 1,Wi-Fi Yes, WIFI 5 & BT5.0,OPS Slot *1 (complies with Intel 80-pin standard), SPDIF 1,Compatible power cord of 3 mts each 2 nos,USB Touch Cable (Type A to B) 1 (5 meters),HDMI Cable 1 (3 meters),Writing Pen 2,Wall mount 1,Remote Control 1,Features/ Software for Smart Board 1. Screen Capture,2. Calculator,3. Splitter,4. Page Replay, 5. Magnifier, 6. Browser for Internet,Support Windows OS platform Should support multi touch & multi writing,Should support Gesture Recognition like zoom, pan, tilt, flicks (preferable) etc,.Native handwriting recognition of English (preferable), Support shape recognition and text recognition features including for all alphabets, numerals (preferable), Should capable to annotate on any 3rd party applications,Should have recording feature,Capability of taking Snapshot from running video, One should be able to write/ draw with a finger. Finger touch should be enabled, Real time interaction and writing speed without any time lag, Should have features like wireless Screen sharing, Screen Casting / Mirroring etc. & allow on screen annotation.,. complete complying with standard specifications as directed by the departmental officers |
| 2 | Supply and Delivery of Procurement of Desktop PC following Specifications Processori5-13th gen (8 Core) or higher,Integrated Chipset,Operating System - Windows 11 Pro Education,Memory (RAM) - 8GB or higherDDR 5,SSD - 512 GB or Higher Storage - HDD - 1TB or Higher,Ports REAR: 1x RJ-45 Gigabit Ethernet, 1x HDMI 1.4, 1x DisplayPort 1.4, 1x Kensington Security Slot™ (7x3mm)4x USB 2.0 Type-A FRONT: 1x 3.5mm combo audio jack, 2x USB 3.2 Gen 1 Type-A, 1x USB 3.2 Gen 1 Type-C,Minimum 21 inch or higher - Display- Minimum 21 inch or higher ,Certification EPEAT Silver, Energy star 8.0, RoHS, REACH / S, REACH, MIL-STD-810,TCO (Only for Monitor),Keyboard & Mouse USB Keyboard and Optical Mouse (wired),Network Interface Wi-Fi 6(802.11ax) (Dual band) 2*2Bluetooth 5.4 Wireless Card In-built,Audio - High Definition Audio, Less than 6.0 Kgs Weight,Security HDD User Password Protection and Security, Kensington Security Slot, Discrete Trusted Platform Module (TPM) 2.0, NIST SP 800-155 compliant BIOS,Warranty 3 Yearscomplete complying with standard specifications as directed by the departmental officers |
| 3 | Procurement of Microsoft M365A3 (License for 5 years) |
| 4 | Supply and Delivery ofWeb Camera Video Resolution -1920 x 1080 Pixels,Frame Rate 30 fps,Support Video Mode 1080p & 720p and should support fixed focus,Field View -60°,Built-in Microphone,USB Interface,2 Metre Cable Length,Built in Clip For PC Monitor and Windows 10 or higher, Linux Operating System Supportcomplete complying with standard specifications as directed by the departmental officers |
| 5 | Supply and Delivery of External Speaker cum MIC Tower Model Speaker with wireless BT/ USB/ FM/ AUX connectivity support and Wireless Mic and Remote Control, 50W or Higher Output Power (RMS),Full Range 4Ω or Higher,Frequency Response 20 Hz - 20 KHz,S/N Ratio ≥75dB or Higher,File Format Support (USB) MP3/WMA,FM frequency scan range 87.5 MHz - 108 MHz or Higher,Accessories Required input cables and wall mount clamps to integrate with Display Panelcomplete complying with standard specifications as directed by the departmental officers |
| 6 | Supply and Delivery of 1 KVA - Online UPS with Batteries for 30 minutes backup (For IFP and Desktop) Following Specifications Switching Technology IGBT-PWM,Input Voltage AC Single phase 160V - 260V 50Hz,Output Voltage AC Single phase 230V +/-1% 50 Hz,3 Years Warranty for UPS (Years),Battery/Backup Bank Provided with Online UPS With Battery, SMF-VRLA conforming to JISC:8702(Pt. I, II&III), Stationary Lead Acid Batteries (with tubular positive plates) in monobloc container conforming to IS:13369:1992 latest Battery type,30 Minutes Backup time,Battery capacity (Ah) - 26,Weight of the Battery (kg) 8.3,Number of Batteries - 3,Minimum Guaranteed VAH 1600 X Per KVA X Per hour of backup time,Warranty for battery (Years) by Battery Manufacturer/Brand hint: NA in case battery not provided 2,Without Inbuilt isolation transformer,Overall Efficiency (%) - >/=90% &<94% without Inbuilt isolation transformer,0.8 or better Power Factor Load Supported,20% Overload for minimum 5 minute,Total Harmonic Distortion(THD) (%) - 3% Maximum @ 100% Linear Load,Crest factor on full non-linear load is not less than 3:1 and Providing Rack for Batteries,Protection for under voltage at battery terminal, Short Circuit & over load at UPS output terminal,Input Voltage, Output Voltage, Input frequency, Output Frequency,Indicator for Mains presence, Indicator for Battery charging and discharging,Pure Sinewave AC Output,Floor Standing Design,1.2 mm Minimum Thickness of M.S. Sheet duly powder coated- Enclosure,IP21 Rating,DC Bus Voltage (In Volts) -36,Minimum Operating Temperature 0 degree Celsius,Maximum Operating Temperature 50 degree Celsius, Relative Humidity Non Condensing at 40 deg C 95 percent.As per Meity (Government of India) guidelines UPS shall have valid BIS CRS certifications as applicable Certification to be provided complete complying with standard specifications as directed by the departmental officers |
| 7 | Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification |
| 8 | Wiring with 2x1.5sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories and with TW switch box and 5AFT switch with painting of suitable colour for open PVC light point / fan point (for electronic regulator) (4 points per coil)SD -17 |
| 9 | Wiring with 2x1.5sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V gradein suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mmx100mmx13mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3pin non interlocking wall socket with 5A flush type switch with painting of siitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug pointSD -37 |
| 10 | Wiring with 2x4sq.mm.PVC insulated SC unsheathed FRLS copper conductor cable of 1100Vgrade in suitable pipe on wall and ceiling with PVC accessories with150mmx100mmx113mTWswitch box for15A 3pin non interlocking wall socket with 15A flush type switch with painting of suitable colour with continuous earth wire connection of 4sq.mm copper wire for open PVC power plug point SD -39 |
| 11 | Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self |
| 12 | Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of Sliding Typefrom the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 125GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with Espag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown colour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the Executive Engineer before use on work |
| 13 | Supply and Delivery of Air Conditioner 2 TR with Stabilizershouldhave one indoor unit and one outdoor unit having a compressor functioning with an environmentally friendly refrigerant like R32 or equivalent,unit should have a full function battery operated cordless remote control.,The indoor units shall be mounted at a suitable height. The outdoor unit shall be mounted on wallbracket or on a raised platform of suitable length and width from ground as per site condition,Stabilizer should be provided in accordance with the capacity and specifications of the air conditioning unit supplied complete complying with standard specifications as directed by the departmental officers |
| 14 | Installation & Commissioning |
