Tender For Work Of Scada Integration Of 132 Kv And 33 Kv Bay At 132 Kv S/S Narkhi Work Of Scada Integration Of 132 Kv And 33 Kv Bay At 132 Kv S/S Narkhi Under Etd Firozabad, Agra-Uttar Pradesh
TDR : 48890461
Tender Notice
BOQ
Expired
Agra
Uttar Pradesh
Tender For Work Of Scada Integration Of 132 Kv And 33 Kv Bay At 132 Kv S/S Narkhi Work Of Scada Integration Of 132 Kv And 33 Kv Bay At 132 Kv S/S Narkhi Under Etd Firozabad
Name of Work: Work of SCADA integration of 132 KV & 33 KV Bayat 132 KV S/S Narkhi under ETD Firozabad
Sl. No.
Item Description
1
Configuration and End to End testing for Validation of the signals as per IO address list of SLDC and Scada configuration and integration of 132kv and 33kv bays of 40 MVA TF-1 and 40 MVA TF-2 and 132KV transmission Line Bays(04 No.) 01 no. BC and 01 no. TBC and 08 No. 33kv outgoing feeder with 02 no. Section isolators position. ICD files data base configuration for New bays remote operation, from HMI event/alarm generation and reports configuration,interlocks and soft logic configuration and its testing.GPS time synchronising of the BAYS and its network topology, SAS communication architecture upgradation etc. of 132KV substation narkhi, adding and commissioning of SCADA system for proper operation of SCADA for successful Remote operation.
2
Data to be configured on IEC60870-5-104/101 Protocol and hot & standby gateway for the remote communication with SLD for all system.main and remote gateway configuration to send the data to SLDC lucknow and modipuram.
3
Checking for system hardware and communication issues for smooth operation of sifang existing system.
4
Configuration /Programming in IEC 61850 Based protocols creating of data base and data set points from respective Bay control unit (BCU\"s) and relays , if existing data is not reflecting on SCADA system.
5
Network topology configuration for checking the healthiness of BCU\"s and RELAYS.
6
Event , alarm and report creation in SCADA HMI-1 and HMI-2 as per the client and server topology in main HMI-1 and HMI-2 and redundant HMI-2
7
Configuration of soft logics and goose measuring in the SCADA HMI.
8
Checking device status in server cum Gateway and updating Firmware.
9
Updating Firmware for all SCADA system for communication Drop issues.
10
Configuration /Programming in server (CB, Isolator open/close indication) for SCADA configuration. Provide data point(3 Phase current and voltages, MW, MVAR,PF) configuration in HMI of SCADA system, SLD configuration rectification work If any.
11
Achieve data point configuration in HMI (SCADA SYSTEM) , Energy import/export 3-phase current and voltage checking of healthiness of of server (SCADA HMI) & WINDOWS,Licence,Backup\"s (SCADA HMI)
12
SCADA local operation testing with respective to all Bays , feeders ,CBs, etc from MAIN HMI-1 and redundant SCADA HMI-2
13
Repairing and rectification of 02 no. CPU of SCADA system and installation of SCADA software and configuration on Desktop.
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
