Tender For Providing Hdpe Pipeline And Other Items Infrant Of Gangappa Atani House Boarwell To Kaladagi House At Anajaneya Nagar Ramdurga Tmc Limits, ramdurg-Karnataka

Providing Hdpe Pipeline And Other Items Infants Of Gangappa Atani House Boarwell To Kaladagi House At Anajaneya Nagar Ramdurga Tmc Limit--1 Earth work excavation for pipeline trenches by mechanical means as per drawing and technical specifications, including setting out, construction of shoring, strutting, barricading, caution lights, bracing, using sight rails & bonding rods at every 100 mm wherever necessary as directed, removal of stumps and other deleterious matter, dressing of sides and levelling the bottom of trench to the extent required , utilising the available excavated earth locally for the work and all other appurtenances to complete in the following strata. PWD SR 2023-24 Page No 10 In No 1.19.1 (Volume-I) Basic Rate 454.00Add 5% AW* 22.70Basic Rate 476.70 2 Providing, laying and jointing HDPE pipes of specified grade and conforming to IS 4984-2016 with latest ammendments and conveying to work site including loading and unloading at both destinations and rolling and lowering into trenches, laying true to line and jointing of pipes and specials with electrofusion welding, giving hydraulic test as per relevant ISS with all lead and lifts including encasing the pipe alround to a depth of not less than 15 cms. with soft gravel or selected earth available from the excation, testing and commissioning. The rate is exclusive of required specials and fittings wherever necessary like saddle Tee, stub ends, flanged sets, bedns, reducers etc. complete (Contractor will make his own arrangements for procuring water for testing) etc. complete. NOTE: Upto 110mm dia Coil shall be used. For :HDPE PE 80 PN 6.0HDPE Grade PE80-PN6.0, 75mm dia PWD SR 2023-24 Page No.95In No 9.1.2 (Volume-V) Basic Rate 245.00Add 5% AW* 12.25Basic Rate 257.25 3 Refilling available earth around trenches/pipelines, cables in layers not exceeding 20 cms in depth, compacting each deposited layer by ramming after watering with a lead upto 50 m, and lift upto 1.5 m. Including cost of all labour complete as per specifications PWD SR 2023-24 Page No 7 In No 1.10 (Volume-V) Basic Rate 110.00Add 5% AW* 5.50Basic Rate 115.50 JA.J¯ï.©.¹ PÁ¯ÉÆäAiÀÄ°ègÀĪÀ ¥ÁgÉøïÖ DAiÀiï.© ¬ÄAzÀ ©Ãr PÁ«ÄðPÀgÀ PÁ¯ÉÆäUÉ 4 Providing and fixing DI Resilient seated soft sealing SLUICE VALVE of variouis dia. with body bonnet of Ductile Iron (DI) conforming ti IS-1865 with the latest amendments and of grade GGG 40/50, shaft of stainless steel, wedge fully rubber lined with EDPM seals of NBR and the valves should be vacum tight and 100% leak proof with face to face dimensions as per IS 14846-2000 with the latest amendments only. The stem sealing should be with toroidal sealing rings (minimum 2 O rings). Body and bonnet should be coated with Electrostatically applied Epoxy Powder Coating with minimum coating thickness of 250 micron both inside and outside. The rate is inclusive of cost of valves, T.P set, galvanized bolts & nuts and rubber insertions etc. but excluding earth work. For PN-10: (Note: TP set should be considered only for DI pipes estimate. For MS pipes estimates, TP sets cost of corresponding dia shall be deducted from the SR rates of valves and provision for corresponding dia MS flanges should be made in the estimate.) etc. complete For sluice Valve of PN -10.0 and 80mm PWD SR 2023-24 Page No 22 In No 2.23.2 (Volume-V) Basic Rate 10393.00Add 5% AW* 519.65Basic Rate 10912.65

INR 500 /-

INR 3750.0 /-

INR 1.21 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB