Inviting Quotation For Base Rate (Plumbing)Of Non Ssr Item For Proposed Zoological Park At Malgund Tal And Dist.Ratnagiri-1 NON CSR ITEM 2 Supply of ACO SS Box Channels (LxW) of SS 304 grade confirming to EN 10088, with depth varying from 100MM to 120MM at edge to 3 to 5. mm at centre with outlet dia 142MM compatible with ACO Gully Vertical Outlet DN 110 , with sectional slope 5° and longitudinal slope of 1%, V shape bottom and material thickness 1.5mm with slip resistant stainless steel grating designed as per load class .... confirming EN 1253 and confirming the Hygiene Design as per EN 1672 & principles as per EHEDG guidelines like - full drainability,Edge infill - which minimises floor cracks and support to the edge of Channel . The channels will be provided with easy fix levelling feet and anchors for fixing in concrete.ACO antislip Mesh Grate: The mesh size design 25 x 25 mm made of SS 304 Grade material with slip resistant R11 (DIN 51130) design of load class L-15 certified as per EN 1253 3 ACO Modular Channel - 300/270 x 300/270 x 120/110, ∅142 vertical outlet, 3xsocketed inlets, anti-slip mesh grating, SS304 4 Supply of ACO Fixed height SS Gullies 300MM.x 300MM mm deep drawn Gullies of 304 grade confirming to DIN EN 10088 with vertical/ horizontal outlet of ..... dia and of thickness 1.5mm with Hygienic slip resistant Stainless Steel Grating designed for Load Class.... confirming to DIN EN 1253. The gully will be designed as per Hygiene Design guidelines DIN EN 1672 & EHEDG guidelines - full drainability, with Edge infill for supporting the edge of channel, Hygienic Joint and Radial corners from inside edge for full cleanability. The Gullies will be self cleaning type with full removable and cleanable foul air trap (FAT) with 50 mm water seal and removable silt basket. The Gullies will be provided with friction ring & easy fix levelling feet and anchors for fixing in concrete. The Gullies will be fully pickle passivated, high corrosion resistant. The Gullies will be suitable for a discharge rate of .....lit .sec. Art. No: ------- 5 Supply of ACO Fixed height SS Gullies 200MM .x 200MM . mm deep drawn Gullies of 304 grade confirming to DIN EN 10088 with vertical/ horizontal outlet of ..... dia and of thickness 1.5mm with Hygienic slip resistant Stainless Steel Grating designed for Load Class.... confirming to DIN EN 1253. The gully will be designed as per Hygiene Design guidelines DIN EN 1672 & EHEDG guidelines - full drainability, with Edge infill for supporting the edge of channel, Hygienic Joint and Radial corners from inside edge for full cleanability. The Gullies will be self cleaning type with full removable and cleanable foul air trap (FAT) with 50 mm water seal and removable silt basket. The Gullies will be provided with friction ring & easy fix levelling feet and anchors for fixing in concrete. The Gullies will be fully pickle passivated, high corrosion resistant. The Gullies will be suitable for a discharge rate of .....lit .sec. Art. No: ------- 6 Supply, install, testing commioning of Roof Corner Drain for terrace rain water with side oultet with all required accessories etc. complete 7 Supply of Prefab polymer concrete ACO DRAIN flat channel V 150 Multiline according to DIN EN 1433 and DIN 19580 having following properties a) Compressive strength -96 N/mm2 b) Flexural strength -27N/mm2 c) Water absorption - 0.07% d) Mannings roughness- 0.011. The Channels to have integrated edge protection made up of Galvanised Steel / Stainless Steel / Cast Iron .......... with boltless drainlock®grating with anti shunt 4 no. provision per length. With tongue and groove joints for interlocking, integrated lip labyrinth sealing for liquid-tight connection to ground line with needed accessories like end cap, end cap with outlet etc. Channels to have anchoring features on the outside wall to ensure mechanical bond to the surrounding bedding material and pavement surface.The Channel gratings will be made up of ductile iron/ Galv. Steel / Stainless Steel 304/PP in 500 mm or 1000 mm length suitable for polymer concrete drain channel as per load class A -15, B-125, C250, D 400, E 600 confirming to EN 1433. The Channel will have nominal width of 150 mm, overall length 1000 mm and invert depth of 120 mm. Art No: ----------------- 8 Supply of Grease separator made of polyethylene as per DIN EN 1825; proven Stability of 50 years; for below ground installation; overall dia of 1320 mm.; with ventilation provision; emptying via suction line DN 65 PN 10; counter flange with fire hose quick coupling 75B and 2½ blank cap and satisfy reaction to fire Class A. Standard odour tight top cover of 600 mm dia. clear opening; frame made of concrete material and cover made of cast iron; with raising tube, load class A15 according to EN 124Inlet and outlet dia: DN 150Make: ACO: Model: Lipumax PDNominal Size: NS 10Grease Storage: 415L, Sludge Storage: 1010L, Overall Capacity: 2170L Art No: 3210.81.00 + 3300.14.01 9 Supply, supervision , installtion & testing of kld water treatment plant for design parameter ph 6-8 , tss approx 500_700 ppm , hardness approx 400_500ppm turbidity approx 20_50 ntu with feed pump, with level controller ssagitator with motor for salt mixing msep sand filter vessel , msep carbon filter vessel , msep softener essel ,with frontal piping butterfly valve with sand media , carbon media , softener resin , salt regeneration tank , electrical cable , cable tray , electrical piping , control panel & msep /upvc piping , pipe fittings & piping work & all necessary equipment’s & instruments required for plant.
