|
| 1 | Taking down chowkats or frames with shutters (without taking off shutters from the frames) area exceeding 1.5 Sqm and not exceeding 4 Sqm each complete all as specified and directed. |
| 2 | Taking down chowkats / frames with shutters (without taking off shutters from the frames) area n\"exc 1.5 Sqm each complete all as specified and directed. |
| 3 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each complete all as specified and directed. |
| 4 | Taking down shutters of any description areanot exceeding 1 Sqm each complete all as specified and directed. |
| 5 | Taking down shutters of any description area exceeding 1 Sqm and not exceeding 2 Sqm each,resecuring or easing & adjusting and refixing in the same opening complete all as specified and directed. |
| 6 | Taking down shutters of any description area notexceeding 1 Sqm each, resecuring or easing & adjusting and refixing in the same opening complete all as specified and directed. |
| 7 | S&F 2nd class soft wood plain, solid, straight chowkets and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue pinned at joints, supplied and fixed complete all as specified and directed |
| 8 | S&F for 30 mm thick2nd class softwood plain framed paneled shutters (any number ofpanels) with panels of timber flat on both sides (feather edged), or ofveneered particle board medium density, wood particle board with commercial face veneers, Supply and fixed to chowkats , complete all as specified and directed. |
| 9 | S&F 2nd class soft wood 35 mm thick Glazed and skelton shutter, open and prepared to receive the glass, gauze etc.(without sash bars) edges of framing plain chamfered or rounded, fitted with cut and mitred beads for securing glass etc complete all as specified and directed |
| 10 | S&F for 30 mm thick Flush shutters, solid core construction ,with block board core and plywood face panels commercial type on both sides , Supply and fixed to chowkats complete all as specified and directed |
| 11 | Material & labour PCC (1:3:6) type C1 (using 20 mm graded stone aggregate) as in hold fast bed block and like including dismantling of any description complete all as specified and directed |
| 12 | Hacking out old broken glass (any thickness size/ quality description) from metal frame including punching or drilling out old glazing pin/spring clips and providing and fixing new one complete all as specified and directed. |
| 13 | S&F Plain Sheet glass 4.80 mm thick, selected quality and glazing with oil pane putty,glazing clips/beading in squares not exceeding 0.5 Sqm in each pane complete, complete all as specified and as directed. |
| 14 | S&F Plain Sheet glass 4.80 mm thick, selected quality and glazing with oil pane putty, glazing clips/beading in squares exceeding 0.5 Sqm in each pane complete, complete all as specified and as directed. |
| 15 | S&F Plain Sheet glass 3.00 mm thick, ordinary quality in steel or wooden frames and glazing with oil pane putty in squares not exceeding 0.5 Sqm in each pane, complete, complete all as specified and as directed. |
| 16 | S&F in repairs Galvanised mild steel wire cloth ,0.63mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanised wire staples. |
| 17 | S&Fmild steel butt hinges, medium weight cold rolled 100mm sizecomplete all as specified and as directed. |
| 18 | S&Fmild steel butt hinges, medium weight cold rolled 75mm sizecomplete all as specified and as directed. |
| 19 | S&F 150mm long aluminium anodized, barrel tower bolt of extruded sectioncompleteall as specified and as directed. |
| 20 | S&F 100mm long aluminium anodized, barrel tower bolt of extruded section completeall as specified and as directed. |
| 21 | S&F 150mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 22 | S&F 100mm size extruded aluminium alloy handles, fabricated type, anodized complete all as specified and as directed. |
| 23 | S&F in repair250mm long aluminium alloy, anodized, sliding door bolt with hasp & staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolt and sliding bolts of extruded section or cast aluminium alloy fixed complete all as specified and as directed |
| 24 | S&F in repair aluminium door closer (aluminium extruded section) hydraulically regulated designation No 3, universe type, suitable for door shutte of 851 mm to 1000 in width and of weight 61 to 80 kg |
| 25 | M & L double action floor spring hydraulically regulated made up of minimum 1.25mm thick aluminium alloy sheet foundation box, main body with stainless steel cover, governing pivot made of brass, other parts made of mild steel heavy duty and fixed complete all as specified and as directed. |
| 26 | S & F floor door stopper 150mm long of aluminium alloy body and tongue, anodised with hard drawn steel spring fixed complete all as specified and as directed. |
| 27 | S & F brass mortice lock 4 levers (Harrison) vertical type size 100 mm or above in old or new position complete all as specified and as directed. |
| 28 | S & F in repairs Harrison rails, 25 mm dia bore stainless steel with fixing brackets, stops rollers in repair etc complete all as specified. |
| 29 | S&F in repair 300mm long mild steel ordinary rat tail rodpattern springs including roller and roller plate complete all as specified and as directed. |
| 30 | S & F anodised aluminium frame of standerd section for doors, windows, ventilators withdoublerebates including joining cleat for fixing etc. complete all as specified |
| 31 | M&L for anodised aluminium door shutters, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber neoprene packing, anodised aluminium snap beading, screws,hinge type B-21 100mm long (3 no.) suitable handle (2 no.) complete all as specified and directed. |
| 32 | M&L for anodised aluminium window and ventilator shutters, side hung type without sash bars, aluminium sections weeighing 0.55 kg/m including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading, screws, anodised aluminium fitings such as peg stays 150mm long (1 no.) hinge type B-21 100mm long (2 no.) suitable handle (1 no.) complete all as specified and directed. |
| 33 | S&F mild steel work as in hold fastsand similar work confirming to Fe-290 or Gd -E 165 including dismantling wrought iron or mild steel work of any description not otherwise provided for, complete.all as specified and as directed by the Engr-in-Chage |
| 34 | S&F for factory made solid panel PVC door shutter 30 mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails.M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20 mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Paneling of plain colour PVC sheet to be fitted in the M. S. frame welded/sealed to the stiles & rails with suitable PVC sheet beading and joined together with solvent cement, suppling& fixing in the frame at site complete all as specified and as directed by Engineer-in-Charge. |
| 35 | S&F solid PVC door frame of size 50mmx47mm made out of 5mm plain colour PVC sheet reinforced with MS square tube complete all as specified and directed by Engineer-in-Charge. |
| 36 | M&L for 2nd class soft wood clean sawn as in battens for grids of ceiling & liningfixed with nails exc 13 sqcm and n exc 25 sqcm in section including dismantlng complete all as specified and as directed. |
| 37 | M&L for 2nd class soft wood clean sawn as in beeding for edges of Ceiling ,lining ,or wooden flooring work fixed with nails exc 6 sqcm and n exc 13 sqcm in sectionincluding dismantlng complete all as specified and as directed. |
| 38 | M&L for covered fillets of standard hard board not less than 6mm thick and up to 40mm wide and fixing with screws including dismantlng complete all as specified and as directed |
| 39 | M&L for9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in wall panelling, shelves/boardingincluding dismantlng complete all as specified and as directed. |
| 40 | M&L for9mm thick prelaminated particle boardmedium interior grade, prelaminated oneside with decorated choice lamination & other side balancing whitelamination fixed with screws to timber frame work as in ceiling, shelves/boardingincluding dismantlng complete all as specified and as directed. |
| 41 | M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in walls, including dismantlng complete all as specified and as directed. |
| 42 | M&L 6mm (5 ply) thick veneered decorative (Knoty Pine) plywood, grade 1 (with BWR resin) with decorative face veneers on one face, fixed with nails to timber frame work as in ceiling, including dismantlng complete all as specified and as directed. |
| 43 | S & F gypsum ceiling board 8 to 9 mm thick in 600 x 600 mm panneldesigner ceiling tiles laminated with white colour PVC film on the face side and a metalised polyster film on the back side, conforming to IS-14862 type B category three including suspended false ceiling using E-grid suspended ceilinggrid system of gridsize 600x600mm with GI frame work of main runner 38 x 24mm sheet thickness 0.4mm, cross Tee 28 x 24mm sheet thickness 0.3mm and wall angle 24 x 24mm to be placed in the grid suspended by 4mm GI wire hanger to be fixed as per site requirement including taking down of old false ceiling complete all as specified and directed. |
| 44 | M&L for wooden floor tiles 7 mm thick with dove tailed joints laid over 150 micron polythene film and3 mm thick foam as per manufacturer\"s instructions, and fixed with decorative wooden beadings as per site requirement including taking down of wooden floor tiles/boarding any type/description complete all as specified and directed. Make and shade of tiles be all as approved. Make : Action tesa/Kajaria/Armstrong |
| 45 | Provn of wooden panelling on wall/ceiling using following specifications including taking down old wooden panelling complete all as specified and directed:-(a)S&F 2nd class hard wood wooden gutties of size 25mmx25mmx 200mm depth fixedin wall by making holes in brick wall and making good in cement mortar 1:3 complete all as specified and directed.(b)S&F horizontal runner 2nd class soft wood (Kali at 120 c/c of sectional area exc. 13 Sqm and n. exc 25 Sqm clean sawn treated with two coats of creoste oil mixed with good quality pesticide for antitermite treatment(c) S&F 1st class soft wood (Deodar) boarding 12mm to 15mm thick as in wall panelling planed one side, wrought and other side clean sawn and applying two coats of good quality varnish on plain surfaces over a coat of primer mixed with good quality pesticide for antitermite treatment on the other side and fixed with screws/nails on wooden runners.(d) S&F 1st class soft wood (Deodar) decorative beading 40mm wide on top surface of wall panelling including two coats of varnish complete all as specified and directed. |
| 46 | M&L for preperation of new or old untreated wood or wood based surface of any description over 10cm width or girth and applying two coat of synthetic enamal paint over a coat of pink primer complete all as specified and as directed. |
| 47 | Taking down carefully copper/Aluminium point wiring (Light, Fan, Socket or power) complete fitting such as switches, ceiling, regulator, sockets etc complete all as specified and directed. |
| 48 | M&L for point wiring with copper conductor cable, multistranded, single core 1.5 Sqmm size for one light point controlled by one switch with PVC insulated multistranded copper conductor cable FRLS of size 1.5 sq mmfor earth continuity in and including PVC casing and capping of approved size and quality fixed on walls/ceiling/wooden panelling including fixing 3 mm thick bakelite sheet onof any size complete all as directed and specified. |
| 49 | All as per Item No 48 butfor one bell/buzzer point controlled by one push button on the same board with other switches or independent with cables 1.5sqmm size complete all as directed and specified. |
| 50 | All as per Item No 48 but forone 3 pin socket outlet, 5 Ampson the same board with other switches, with cables1.5 Sqmmsize complete all as directed and specified. |
| 51 | All as per Item No 48 but forone 3 pin socket outlet, 5 Amps Independent with cables1.5 Sqmmsize complete all as directed and specified. |
| 52 | M&L for point wiring for 3pin 15 Amps socket outlet independent with copper conductor cable PVC insulated multistrand 2.5 Sqmm with 2.5 sqmm PVC copper conductor as earth wire connected to earth dolly and includingPVC casing/caping with sunk cast iron complete all as directed and specified. |
| 53 | S&F in replacement switch piano flush type one way single pole 5 Amp 240 volts.Make : Anchor/Havells |
| 54 | S&F in replacement switch socket combination 2 in 1, 5 Amps flush type universal. Make : Anchor/Havells |
| 55 | S&Fin replacement socket outlet 3Pin, 5A, flush type. Make : Anchor/Cona/Havells |
| 56 | S&F in replacement switch socket combination 3pin 16A flush type. Make : Anchor/Cona/Havells |
| 57 | S&Fin replacement modular bell push 6A 1 module. Make : Anchor/Havells/L&T |
| 58 | S&Fin replacement Bell push, flush type, 5 amp single pole ISI marked complete. |
| 59 | S&Fin replacementModular switchone way single pole 6 Amp 1 module 240 volts colour white/Grey.Make : Anchor/Havells/Cona |
| 60 | S&F in replacement Modular switchone way single pole 16 Amp 1 module 240 volts colour white/Grey.Make : Anchor/Havells/Cona |
| 61 | S&Fin replacementModular socket 6/16 A -2/3 Pin combined 2 module 240 Volt colour white/Grey, Make:Anchor/Havells/Cona |
| 62 | S&F in replacement Modular socket 6 A -2/3 Pin combined 2 module 240 Volt,colour white/Grey Make:Anchor/Havells/Cona |
| 63 | S&F in replacement modularcover plate colour white/Golden Pecan/Black Ebony withframe 3 module. Make : Anchor Roma/Havells/L&T |
| 64 | S&Fin replacement modularwhite/Golden cover plate withframe 6 module. Make : Anchor Roma/Havells/L&T |
| 65 | S&F in replacement modular cover plate colour white/Golden Pecan/Black Ebony withframe 8 module. Make : Anchor Roma/Havells/L&T |
| 66 | Deduct Schedule of Credit of Rs (-) 75567.00 (Minus) as listed in Schedule \"A\" (Contd). Contract Sum shall be arrived after deducting the credit amount.Note :- Tenderers will not quote against this item being a firm amount. |
