|
| 1 | Supply, delivery and erection of 12 meter High Mast System totally Hot dip galvanized in2 Sections in dimentions of Base-450mm and Top section-200mm with Galvanization thickness for bottom-85 Microns and Top of 65 Microns, Double door and interlocking arrangements, Mast Bottom section thickness of 5mm and Top section of 4mm Suitable for 50Mtrs / sec wind velocity fixed Head frame with canopy movable Lantern carriage three/double drum winch, Hosting Stain Less Steel ropes, flexible Multicore Heat proof power cable capable of withstanding up to 50Mts / sec Air velocity including supply and fixing of 8Nos of 200watts LED Flood Light Luminaries energy saverfitting with COB diodes in die cast aluminium housing and IP 65 protection of reputed brand manufacturing in india with surge protection of 10kw and Supply and Fixing of Obstruction Aviation Light as specified in the Relevant ISS codes as per standard and as directed by the dept. officers.(SUB DATA -1) |
| 2 | Design and casting of pedestal type RCC Foundation to SBC of soil 10T/M2 including earth work excavation, RCC works with necessary RTS rods with standard designs, steel Centering, Foundation bolls & nuts manufactures in special steel with anchor plates and templates etc. as per standard and as directed by the dept. officers (SUB DATA -2) |
| 3 | Supply and Laying of 3 1/2 x 25 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good. (SD 659) |
| 4 | Supply and clarnping of 3 1/2 x 35 sq.mm. PVC LTUG armoured cable on post or on wall with MS clamps as per standard.etc., complete for Service connection usage. (SD 201) |
| 5 | Supply and providing cable end termination of 3-1/2 x 25sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 213) |
| 6 | Supply and providing cable end termination of 3 - 1/2 x 35 sq.mm. PVC LTUG aluminium armoured cable with necessary aluminium cable sockets by crimping etc with electrical connection complete. (SD 214) |
| 7 | Supply and fixng of TNEB Meter Board suitable for 3 Phases 32A service connection in fabricated Powder coated sheet metal box made up of suitable angle iron frame work of size 2 feet x 1 1/2 feet using angle iron of size 1 1/2\" x 1 1/2\" x 1/4\" rigidly fixed on EB Pole covered with hylem sheet of size 2 feet x 1/2 feet of 6mm thickness with necessary MS Clamp sets, bolts and nuts and supply and fixing of 3 Nos 63A fuse units (500V) 1 No. Neutral link, copper earth flat of size 1\" x 1/4\" with inter connection of EB meter to fuse units by 7/16 PVC insulated copper wire with earth connection complete.(SD 131A) |
| 8 | Supply, erection and commissioning of outdoor type pillar box made of 16 gauge MS sheet of size 600 x 300 x 600mm with angle iron support and with double door & locking key arrangements finished with anti corrosive treatment and painting mounted on Concrete bed block with M.S angles, cable entry holes and Internal Wiring with suitable capacity of Copper Conductor wire to accommodate the following componants,a) Supply and fixing of 40A 4 pole MCB-1 No for incomming supply and 32A Single pole MCB -3Nos. for out going supply.b) Supply and fixing of 32A L&T make 4Pole power contactor -2Nos. c) Supply and fixing of 0-24hrs L&T Make FM1 Model DialType timer for controlling street lights -2 Nos. for Peakand off-peak hour operation.d) Supply and fixing of indicator lamps.The control panel shall be pre-wired and tested and panel shall begenerally confirming to I.E.rules.& Connector. |
| 9 | Earthing as per the ISI specification with an earth electrode of 2.10 metre Class \"B\" GI pipe of dia not less than 40mm with copper earth plate of size 125mm x 50mm x 6mm with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry. (SD 211) |
| 10 | Labour for cutting open road for laying water mains or sewer. B.T. Roads (or) Maccadam road (PWD Vol -II) WD-W0739 p.no 195 |
| 11 | Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification |
| 12 | Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification |
| 13 | Providing 2.50 m Dia protecting the Structure with plain cement concrete with ornamental design,laying tiles, providing stainless steel pipes,Balls and chains givendesign |
