Tender For Providing Smart Class Rooms Infrastructures In Erode Zone Erode District And Tiruppur District Capital Head Number Of Classrooms 5 Nos, erode-Tamil Nadu

Providing Smart Class Rooms Infrastructures In Erode Zone Erode District And Tiruppur District Capital Head Number Of Classrooms 5 Nos; 1 INTERACTIVE TOUCH PROFESIONAL DISPLAY, ACTIVE LED VIDEO WALL AND VIDEO CONFERENCING SYSTEM - 65”, 4K, Andriod-13, INTERACTIVE TOUCH ProfessionalDisplay with USB-C, HDMI-In & Out. As per PWD SOR Page No 253, Code No. M-2768 2 1 PHASE UPS (Single Phase In & Single Phase Out) 1 KVA CAPACITY - SYSTEM WITH BATTERY - 1 HOUR BACKUP As per PWD SOR Page No 214, Code No. M-2100 3 SUPPLY & INSTALLATION OF 2.0 TR Split Type AC Unit - 5 Star Rated AIR-CONDITIONERWITH COPPER COIL As per PWD SOR Page No 208, Code No. M-1985 4 Supply and installation of 4 KVA capacity Automatic Voltage Stabilizer with time delay relay As per PWD SOR Page No 208, Code No. M-1988 5 Supply and installation of PA Mixer Amplifier 120W As per PWD SOR Page No 220, Code No. M-2149 6 Supply and installation of Wall Speaker 15W As per PWD SOR Page No 220, Code No. M-2152 7 Supply and installation of Cordless Mic UHF As per PWD SOR Page No 220, Code No. M-2156 8 Supply and installation of 2 Core 1.5 sq.mm Shielded Copper Speaker Wire As per PWD SOR Page No 220, Code No. M-2158 9 Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 10 Providing and fixing casement doors fabricated from un-plasticized polyvinyl chloride (uPVC) sections Profiles: The profiles should be three chamber system which provides high insulation properties with outer frame 60mm x 55mm with an outer wall thickness of 2.4mm. The window unit should be designed with all corner joints mitred and fusion welded. Windows should be steel reinforced with 25 x 24 x 25mm steel reinforcement with a thickness of 1mm to have dimensional stability. The sash should be of 60 x 102mm. The mullion should be of 60 x 74mm. The profiles should have co-extruded seals.Hardware: All the hardware like friction stays, handles should be screwed with self tapping screws. The handles, locks should be designed so that they cannot be released from outside.Glazing: The window system should be glazed with 5mm plain float glass / 6mm bison lam. Installation: The profiles should be cut to length and welded 45 degrees. The window should be designed such that the water drainage does not pass through the reinforcement chamber. The window system should be fixed directly to the plastered brick wall using self expanding nylon plug and driving ms electroplated screws into plug As per PWD SOR Page No 108, Code No. M - 0673 11 Supplying and fixing UPVC (Un-Plasticized Polyvinyl Chloride) Windows of casement type (open) from the profile the size of outer frame 60mm x 58mm and shutter profile are reinforcement with GI/1mm 25GSM and 100% corrosion free, the profiles are multi chambered sections with wall thick of 2mm. The EPDM rubber (black colour) covered with over all the edges of frame and shutter the shutter will be provided with spag multi power point locks and also it operates as handle. The corners and joints should be welded and cleaned. Radiations free pin headed plain or brown olour glass 4mm thick should be provided to the shutter and it should not allow leakage of water even at most ranging storms and should have key lockable action, security protective hinges, strong locking systems and as per size for arresting noise and energy loss. The connecting mechanism between sash and outer frame that enables opening of the window. The window should be fixed to the wall with 100% packing with screws and silicon packing all round the frames. The window should be got approved from the executive Engineer before use on work As per PWD SOR Page No 109, Code No. M - 0674 12 Wiringwith2x1.5sq.mm.PVCinsulatedSCunsheathedFRLScopperconductorof1100VgradeinsuitablePVCrigidpipeonwallandceilingwithPVCaccessoriesandwithTWswitchboxand5AFTswitchwithpaintingofsuitablecolourfor open PVC light point / fan point (for electronic regulator) (5 points per coil) SD-18 13 Wiring with 2x1.50 Sqmm (22/0.3) PVC insulated unsheathed Cu. Conductor of 1100 V Grade in suitable PV C rigid pipe on wall and ceiling with PVC accessories with 150 x 100 x 113mm TW switch box for 5A 3 pin non inter locking CS Plug with painting of suitable colour with continuous earth wise connection of 14 SWG TO and with TCwire for open PVC Plug Point.SD-36 14 Supply and installation of Desktop PC (hp Intel Core i5-13500 All in One PC and Windows 11 Pro OS and Anti Virus) with Microsoft M365A3 (License for 5 Years) 15 Supply and installation of Web Camera ConfEye PTZ Function Video Conferencing Camera No Resolution (Maximum) each camera Full HD (1920 x 1080 Pixel)

Sr No	CorrigendumDate	Corrigendum	CorrigendumType	NewSubmissionDate
1	07-05-2025	SCHOOL IMPROVEMENT GRANT 2024 2025 Capital Head Number of Classrooms 5 Nos	Technical Bid	09-05-2025

Refer document

INR 25000.0 /-

INR 25 Lakhs /-