|
| 1 | Laying and Jointing PVC Pipe. Heading |
| 2 | Removing white or colour wash by scrapping and sand papering and preparing the surface smooth including necessary repairs to scratches etc. complete |
| 3 | Applying BIRLA PUTTY or equivalent putty on previousaly bila putty smoothen surface over one cost of water base cement primer of ICI or equivalent brand for smoothining and leveling of the surface as per requirement and direction of E/I including cost of all material , labour and T&P required for proper completion of work. |
| 4 | Finishing walls with Premium Acrylic Smooth exterior paint with Silicone additives of required shade Old work (Two or more coats applied @ 1.43 ltr/ 10 sqm) over existing cement paint surface. |
| 5 | Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade One or more coats on old work |
| 6 | Providing and fixing 15 mm thickfalse ceiling tilesat all heights with integral densified calcium silicate reinforced with fibre and natural filler false ceiling tiles of Size 595x595 mm of approved texture, design and patterns having NRC (Noise Reduction coefficient) of 0.50 (minimum) as per IS 8225:1987, Light reflectance of 85% (minimum). Non combustible as per BS:476 (part-4), fire performance as per BS:476 (part 6 &7), humidity resistance of 100%, thermal conductivity < 0.043 W/m K as per ASTM 518:1991,in true horizontal level on the existing frame work consisting of T-sections and Lsections suitably fixed according to tile size as per direction of Engineer-in-charge |
| 7 | Providing and laying Vitrified tiles in floor with different sizes (thickness to be specified by the manufacturer), with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid with cement based high polymer modified quick set tile adhesive (water based) conforming to IS : 15477, in average 6 mm thickness, including grouting of joints (Payment for grouting of joints to be made separately |
| 8 | Providing and fixing of Roller Blind of approved shade as per drawing& specificationas approved by the architect/Engineer in charge. The work includes cost ofall labour, material and T&P etc |
| 9 | Providing and fixing in place a full height storage cabinet 450 mm deep made with 19 mm thick ISI marked ply borad, all interior surfaces to finished with pasting of 0.8 mm thick mica and all exterior surfaces to be finshed with pasting of 1 mm thick mica of texture and colour as approved by Engineer in Charge including all labour, T&P, other items like (but not limited to) fevicol, nails screws, higes, sliders,door handles, multipurpose lock of godrej or equivalent rate etc. required for proper completion of works, to be measured interms of front area only |
| 10 | Providing & fixing of executive officer computer work station cum work table of different size as per requirment fitted in any floor ofShakti Bhawanbuilding.The unit shall be measured by lengthxbreadth of work top and .76 mtr hight.The entire above unit shall be fabricatedwith 19mm block board of superior quality swastik made all exterior surface with approved quality 1mm thick sunmica laminated and interior surface finished with 10x20 mm thick sprit polishedteak wood beading.One no drawer and one flap door fabricatedwith the help of 19 mm block board swastik block/ green or equivalent .The cup board shallhave lockable magnet door fabricated with19 mm block boardfixedto cup board with magnethaving in handle .The main table rack shall be approved matel handle and necessary m.p lock all drawers shall be provided with approved quality slider machanism.The foot boardshall be also provided in above three peace.The work include cost of all labour ,material T&P required for proper completion of work. |
| 11 | Providing & Making & Fixing of Wall Pannelingas on damaged surface The surface cladded with 6mm Water Proof & Fire Retardent ply fitted with the help of nails sulution on wall surfaceas per the approveddesign all complete as per drawing, specification and directionas approved by the Architect/ Engineer -in-Charge |
| 12 | Providing and fixing ISI marked flush door shutters 35 mm thick including ISI marked Stainless Steel butt hinges with necessary screws conforming to IS : 2202 (Part I) non-decorative type, core of block board construction with frame of 1st class hard wood and well matched commercial 3 ply veneering with vertical grains or cross bands and face veneers on both faces of shutters:. |
| 13 | Providing & fixing ofLamination both side on flush door complete with all fittings round mortis door clousure Door Lock & Door Closure), etc all complete all complete as per drawing, specification and direction of engineer incharge |
| 14 | Providing & fixing 12mm toughned glass Partition with 12 mm modi float glass fixed edge to edge as per design and drawing and polished where reqired along with neccesry hardware all complete as per drawing ,specification and direction as approved by E/I |
| 15 | Providing and fixing sun-film of Gareware or equivalent make onglass panes of door and window shutters including cost of allmaterials,labour and T&P etc. required for proper completion ofthe work |
| 16 | Supply and Fixing of 8 mm Table top Glasswith edge polish all respect as approved by E/I. |
| 17 | Supply & Providing and fixing aluminium die cast body tubular type universal hydraulic door closer (having brand logo with ISI, IS : 3564, embossed on the body, door weight upto 35 kg and door width upto 700 mm), with necessary accessories and screws etc. complete |
| 18 | Supply and fixing 200 mm Doorhandle set with Lock Body ELC 10 65Lever Mortise Lock 6329 Godrej or Equivalent makeits fixing and adjustment with the help of screws, nuts and bolts including supply of all labour, T & P etc. required for proper completion of the work |
| 19 | Reparing and fixing of M.Srack of size .9x2.1 including Fixing M.S Rack wheel Frame for movementof rack & changes of ms shelve if required anditscutting,jointing & welding and proper enamle painting on ms frame & shelve of rackas per required for proper completion of work |
| 20 | Reparing and fixing of M.Sglazed window of size .75x1.6 including changes of glass ,rubber beading,hings,handleanditscutting,jointing & welding and proper enamle painting on ms frame of windowas per required for proper completion of work |
| 21 | Supply of mar keen cloth for binding file required for proper completion of the work |
| 22 | Supply of labour like Beldar/ Coolie for binding of file, Shifting Furniture, & Rearranging of Furniture etcwork.Labour rate+CP |
